Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 30.

Article

Dirbude, S and Eswaran, Vinayak and Kushari, A (2012) Droplet vaporization modeling of rapeseed and sunflower methyl esters. Fuel, 92 (1). pp. 171-179. ISSN 0016-2361

K, Venkatasubbaiah and Y, Jaluria (2012) Numerical Simulation of Enclosure Fires with Horizontal Vents. Numerical Heat Transfer, Part A Applications, 62 (3). pp. 179-196. ISSN 1040-7782

Kumar , B and Mittal, S (2012) On the origin of the secondary vortex street. Journal of Fluid Mechanics, 711. pp. 641-666. ISSN 0022-1120

M, Ramji and Srilakshmi, R (2012) Design of composite patch reinforcement applied to mixed-mode cracked panel using finite element analysis. Journal of Reinforced Plastics and Composites, 31 (9). pp. 585-595. ISSN 0731-6844

N, Om Prakash Raj and K, Venkatasubbaiah (2012) A new approach for the design of hypersonic scramjet inlets. Physics of Fluids, 24 (8). 086103-1. ISSN 1070-6631

Pal, A and Bandyopadhyay, D and Biswas, G and Eswaran, Vinayak (2012) Enhancement of heat transfer using delta-winglet type vortex generators with a common-flow-up arrangement. Numerical Heat Transfer, Part A Applications, 61 (12). ISSN 1040-7782

Vyasarayani, C P (2012) Galerkin Approximations for Neutral Delay Differential Equations. Journal of Computational and Nonlinear Dynamics, 8 (2). 021014-1. ISSN 1555-1415

Vyasarayani, C P and Abdel-Rahman, E M and McPhee, J (2012) Modeling of Contact and Stiction in Electrostatic Microcantilever Actuators. Journal of Nanotechnology in Engineering and Medicine, 3 (1). pp. 1-8. ISSN 1949-2944

Vyasarayani, C P and Sandhu, S S and McPhee, J (2012) Nonsmooth Modeling of Vibro-Impacting Euler-Bernoulli Beam. Advances in Acoustics and Vibration. pp. 1-9. ISSN 1687-6261

Vyasarayani, C P and Uchida, T and McPhee, J (2012) Single-shooting homotopy method for parameter identification in dynamical systems. Physical Review E, 85 (3). 036201-1. ISSN 1539-3755

Book Section

Subramanian, S and George, T and Thondiyath, A (2012) Obstacle avoidance using multi-point potential field approach for an underactuated flat-fish type AUV in dynamic environment. In: Trends in Intelligent Robotics, Automation, and Manufacturing: First International Conference, IRAM 2012, Kuala Lumpur, Malaysia, November 28-30, 2012. Proceedings. Communications in Computer and Information Science . Springer Berlin Heidelberg, pp. 20-27. ISBN 978-3-642-35196-9

Conference or Workshop Item

Banerjee, Raja and Gopinath, R (2012) Numerical study of heat and mass transfer in evaporating multiple droplets composed of binary mixture of ethanol and isooctane. In: International Mechanical Engineering Congress and Exposition, 9-15, November 2012, Houston, TX; United States.

Bhatia, J C and Srivastava, J P and Sangwai, J S and Sharma, Abhay (2012) Investigations on gas trapping phenomena for different EOR-water alternate gas injection methodologies. In: International Petroleum Technology Conference, 7-9, Feb. 2012, Bangkok; Thailand.

Kashfuddoja, M and Ramji, M (2012) Estimation of Stress Intensity Factor of Cracked Panel Repaired with Unsymmetrical Patch Using Combined FEA and GA Approach. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.

Krishna, P M and R, Prasanth Kumar and Srivastava, S (2012) Energetics of level walking trot gaits in quadruped robots. In: IEEE International Conference on Robotics and Biomimetics, 11-14 December, 2012, Guangzhou; China.

Prasath, R G R and Ramji, M (2012) Study of Matrix Crack and Inclusion Interactions Using Digital Photoelasticity and FEA. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.

Srilakshmi, R and Ramji, M (2012) Fatigue Crack Growth Estimation of Three Dimensional Cracked Panel Repaired with Single and Double Sided Patch. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.

Subramanian, S and George, T and Thondiyath, A (2012) Hardware-in-The-Loop verification for 3D obstacle avoidance algorithm of an underactuated flat-fish type AUV. In: International Conference on Robotics and Biomimetics, 11-14 December, 2012, Guangzhou; China.

Veerkar, V V and Ramji, M (2012) Experimental and Numerical Evaluation of Stress Intensity Factors for Interacting Parallel Edge Cracked Panel. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.

Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K (2012) A Detailed Validation Study of Multi-Environment Eulerian PDF Transport Method for Modeling Turbulent Non-Premixed Combustion. In: ASME 2012 Gas Turbine India Conference, December 1, 2012, Mumbai, Maharashtra, India,.

Thesis

B, Mrunalini and Eswaran, Vinayak (2012) Development of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation. Masters thesis, Indian Institute of Technology Hyderabad.

Dighe, A S and Eswaran, Vinayak (2012) Numerical Computation of Compressible Fluid Flows. Masters thesis, Indian Institute of Technology Hyderabad.

Garala, Sathish Kumar and Pandey, Ashok Kumar (2012) Analysis of Linear and Non-Linear Stress-Strain Properties for Graphene and Single Walled Carbon Nanotubes. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Ravi and K, Venkatasubbaiah (2012) Numerical Study on Buoyancy Induced Flow in Enclosures Connected By Horizontal Vents. Masters thesis, Indian Institute of Technology Hyderabad.

N, Om Prakash Raj and K, Venkatasubbaiah (2012) Design and Analysis of Generic Hypersonic Scramjet Inlets. Masters thesis, Indian Institute of Technology Hyderabad.

Namdeo, C P and B, Venkatesham (2012) Free Vibration Analysis of HVAC Ducts. Masters thesis, Indian Institute of Technology Hyderabad.

P, Vinay kumar and S, Suryakumar (2012) Evaluation of Rapid Manufacturing Solutions for Improved Knee Implants Using Finite Element Analysis. Masters thesis, Indian Institute of Technology Hyderabad.

Pai, R N and M, Ramji (2012) Effect of Interface Crack and Corner Singularity in Bimaterial System – Experimental and Numerical Investigation. Masters thesis, Indian Institute of Technology Hyderabad.

T, Raja jayasingh and Banerjee, Raja (2012) Numerical Analysis of Thermal Spray Coating Process. Masters thesis, Indian Institute of Technology Hyderabad.

Veerkar, V V and M, Ramji (2012) A Study on Experimental Determination of Mixed-Mode Sif’s Using Digital Photoelasticity and DIC. Masters thesis, Indian Institute of Technology Hyderabad.

This list was generated on Wed Jul 17 22:16:34 2024 IST.