Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2012
Up a level |
B
B, Mrunalini and Eswaran, Vinayak (2012) Development of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation. Masters thesis, Indian Institute of Technology Hyderabad.
Banerjee, Raja and Gopinath, R (2012) Numerical study of heat and mass transfer in evaporating multiple droplets composed of binary mixture of ethanol and isooctane. In: International Mechanical Engineering Congress and Exposition, 9-15, November 2012, Houston, TX; United States.
Bhatia, J C and Srivastava, J P and Sangwai, J S and Sharma, Abhay (2012) Investigations on gas trapping phenomena for different EOR-water alternate gas injection methodologies. In: International Petroleum Technology Conference, 7-9, Feb. 2012, Bangkok; Thailand.
D
Dighe, A S and Eswaran, Vinayak (2012) Numerical Computation of Compressible Fluid Flows. Masters thesis, Indian Institute of Technology Hyderabad.
Dirbude, S and Eswaran, Vinayak and Kushari, A (2012) Droplet vaporization modeling of rapeseed and sunflower methyl esters. Fuel, 92 (1). pp. 171-179. ISSN 0016-2361
G
Garala, Sathish Kumar and Pandey, Ashok Kumar (2012) Analysis of Linear and Non-Linear Stress-Strain Properties for Graphene and Single Walled Carbon Nanotubes. Masters thesis, Indian Institute of Technology Hyderabad.
K
K, Venkatasubbaiah and Y, Jaluria (2012) Numerical Simulation of Enclosure Fires with Horizontal Vents. Numerical Heat Transfer, Part A Applications, 62 (3). pp. 179-196. ISSN 1040-7782
Kashfuddoja, M and Ramji, M (2012) Estimation of Stress Intensity Factor of Cracked Panel Repaired with Unsymmetrical Patch Using Combined FEA and GA Approach. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.
Krishna, P M and R, Prasanth Kumar and Srivastava, S (2012) Energetics of level walking trot gaits in quadruped robots. In: IEEE International Conference on Robotics and Biomimetics, 11-14 December, 2012, Guangzhou; China.
Kumar, Ravi and K, Venkatasubbaiah (2012) Numerical Study on Buoyancy Induced Flow in Enclosures Connected By Horizontal Vents. Masters thesis, Indian Institute of Technology Hyderabad.
Kumar , B and Mittal, S (2012) On the origin of the secondary vortex street. Journal of Fluid Mechanics, 711. pp. 641-666. ISSN 0022-1120
M
M, Ramji and Srilakshmi, R (2012) Design of composite patch reinforcement applied to mixed-mode cracked panel using finite element analysis. Journal of Reinforced Plastics and Composites, 31 (9). pp. 585-595. ISSN 0731-6844
N
N, Om Prakash Raj and K, Venkatasubbaiah (2012) A new approach for the design of hypersonic scramjet inlets. Physics of Fluids, 24 (8). 086103-1. ISSN 1070-6631
N, Om Prakash Raj and K, Venkatasubbaiah (2012) Design and Analysis of Generic Hypersonic Scramjet Inlets. Masters thesis, Indian Institute of Technology Hyderabad.
Namdeo, C P and B, Venkatesham (2012) Free Vibration Analysis of HVAC Ducts. Masters thesis, Indian Institute of Technology Hyderabad.
P
P, Vinay kumar and S, Suryakumar (2012) Evaluation of Rapid Manufacturing Solutions for Improved Knee Implants Using Finite Element Analysis. Masters thesis, Indian Institute of Technology Hyderabad.
Pai, R N and M, Ramji (2012) Effect of Interface Crack and Corner Singularity in Bimaterial System – Experimental and Numerical Investigation. Masters thesis, Indian Institute of Technology Hyderabad.
Pal, A and Bandyopadhyay, D and Biswas, G and Eswaran, Vinayak (2012) Enhancement of heat transfer using delta-winglet type vortex generators with a common-flow-up arrangement. Numerical Heat Transfer, Part A Applications, 61 (12). ISSN 1040-7782
Prasath, R G R and Ramji, M (2012) Study of Matrix Crack and Inclusion Interactions Using Digital Photoelasticity and FEA. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.
S
Srilakshmi, R and Ramji, M (2012) Fatigue Crack Growth Estimation of Three Dimensional Cracked Panel Repaired with Single and Double Sided Patch. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.
Subramanian, S and George, T and Thondiyath, A (2012) Hardware-in-The-Loop verification for 3D obstacle avoidance algorithm of an underactuated flat-fish type AUV. In: International Conference on Robotics and Biomimetics, 11-14 December, 2012, Guangzhou; China.
Subramanian, S and George, T and Thondiyath, A (2012) Obstacle avoidance using multi-point potential field approach for an underactuated flat-fish type AUV in dynamic environment. In: Trends in Intelligent Robotics, Automation, and Manufacturing: First International Conference, IRAM 2012, Kuala Lumpur, Malaysia, November 28-30, 2012. Proceedings. Communications in Computer and Information Science . Springer Berlin Heidelberg, pp. 20-27. ISBN 978-3-642-35196-9
T
T, Raja jayasingh and Banerjee, Raja (2012) Numerical Analysis of Thermal Spray Coating Process. Masters thesis, Indian Institute of Technology Hyderabad.
V
Veerkar, V V and M, Ramji (2012) A Study on Experimental Determination of Mixed-Mode Sif’s Using Digital Photoelasticity and DIC. Masters thesis, Indian Institute of Technology Hyderabad.
Veerkar, V V and Ramji, M (2012) Experimental and Numerical Evaluation of Stress Intensity Factors for Interacting Parallel Edge Cracked Panel. In: Fourth International Conference on Structural Stability and Dynamics, 4-6 January 2012, Jaipur, India.
Vyasarayani, C P (2012) Galerkin Approximations for Neutral Delay Differential Equations. Journal of Computational and Nonlinear Dynamics, 8 (2). 021014-1. ISSN 1555-1415
Vyasarayani, C P and Abdel-Rahman, E M and McPhee, J (2012) Modeling of Contact and Stiction in Electrostatic Microcantilever Actuators. Journal of Nanotechnology in Engineering and Medicine, 3 (1). pp. 1-8. ISSN 1949-2944
Vyasarayani, C P and Sandhu, S S and McPhee, J (2012) Nonsmooth Modeling of Vibro-Impacting Euler-Bernoulli Beam. Advances in Acoustics and Vibration. pp. 1-9. ISSN 1687-6261
Vyasarayani, C P and Uchida, T and McPhee, J (2012) Single-shooting homotopy method for parameter identification in dynamical systems. Physical Review E, 85 (3). 036201-1. ISSN 1539-3755
Y
Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K (2012) A Detailed Validation Study of Multi-Environment Eulerian PDF Transport Method for Modeling Turbulent Non-Premixed Combustion. In: ASME 2012 Gas Turbine India Conference, December 1, 2012, Mumbai, Maharashtra, India,.