Items where Division is "Department of Material Science Engineering" and Year is 2014

Article

Bhattacharjee, P P and Sathiaraj, G D and Zaid, M and Gatti, J R and Lee, C and Tsai, C W and Yeh, J W (2014) Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy. Journal of Alloys and Compounds, 587. pp. 544-552. ISSN 0925-8388

Bhattacharjee, P P and Zaid, M and Sathiaraj, G D and Bhadak, B (2014) Evolution of Microstructure and Texture during Warm Rolling Of a Duplex Steel. Metallurgical and Materials Transactions A, 45 (4). pp. 2180-2191. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Saha, S and Gatti, J R (2014) Effect of change in strain path during cold rolling on the evolution of microstructure and texture in Al and Al-2.5%Mg. Journal of Materials Engineering and Performance, 23 (2). pp. 458-468. ISSN 1059-9495

Dey, Suhash Ranjan and Meshram, M P and Basanth Kumar, K (2014) Mechanical properties and microstructural characterization of friction stir welded aIsI 316 austenitic stainless steel. International conference on advances in Manufacturing and Materials engineering.

Durga Rao, T and Ramadurai, Ranjit and Asthana, Saket (2014) Enhanced magnetization and improved insulating character in Eu substituted BiFeO3. Journal of Applied Physics, 115 (12). ISSN 0021-8979

Durga Rao, T and Ranjith, R and Asthana, Saket (2014) Prominent improvement in the magnetic and electric properties of EU substituted bifeo3. Journal of Applied Physics.

Gatti, J R and Bhattacharjee, P P (2014) Microstructure and Texture of Al-2.5wt.%Mg Processed by Combining Accumulative Roll Bonding and Conventional Rolling. Journal of Materials Engineering and Performance. 10p. ISSN 1059-9495

Gatti, J R and Bhattacharjee, Pinaki Prasad (2014) Annealing textures of severely cold and warm-rolled Al-2.5 wt.%Mg alloy. Journal of Alloys and Compounds, 615. pp. 950-961. ISSN 0925-8388

Karthik, T and Ramadurai, Ranjit and Asthana, Saket (2014) Evidence for the suppression of intermediate anti-ferroelectric ordering and observation of hardening mechanism in Na1/2Bi1/2TiO3 ceramics through cobalt substitution. AIP Advances, 4. ISSN 2158-3226

Khandelwal, M and Windle, A (2014) Origin of chiral interactions in cellulose supra-molecular microfibrils. Carbohydrate Polymers, 106 (1). pp. 128-131. ISSN 0144-8617

Khandelwal, Mudrika and Windle, A (2014) Small angle x-ray study of cellulose macromolecules produced by tunicates and bacteria. Inter National Journal of Biological Macromolecules.

Lahiri, A and Abinandanan, T A and Gururajan, M P and Bhattacharya, Saswata (2014) Effect of epitaxial strain on phase separation in thin films. Philosophical Magazine Letters, 94 (11). pp. 702-707. ISSN 0950-0839 (In Press)

Mallesham, B and Ramadurai, Ranjit and Manivelraja, M (2014) Scandium induced structural transformation and B':B' cationic ordering in Pb(Fe0.5Nb0.5)O3 multiferroic ceramics. Journal of Applied Physics, 116 (3). ISSN 0021-8979

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2014) CuIn1-xGaxSe2 thin-film absorber layers for solar photovoltaics fabricated by two-stage pulsed current electrodeposition. Materials Letters, 118 (1). pp. 158-160. ISSN 0167-577X

Manish, P M and Basanth Kumar, K and Dey, Suhash Ranjan (2014) Friction Stir Welding of Austenitic Stainless Steel by PCBN Tool and its Joint Analyses. International Conference on Materials Manufacturing ICMPC.

Manivannan, A and S K, Myana and Miriyala, K and Sahu, S and Ramadurai, R (2014) Low power ovonic threshold switching characteristics of thin GeTe6 films using conductive atomic force microscopy. Applied Physics Letters, 105 (243501). pp. 1-5. ISSN 0003-6951

Ramakrishna, P. E. Seeram and Khandelwal, Mudrika (2014) Attributes of Engineers and Engineering Education for the Twenty-First-Century World. Journal of Engineering Education Transformations. pp. 47-55. ISSN 2349-2473

Vasudevan, R and Karthik, T and Selvakumar, D and Ganesan, S and Jayavel, R (2014) Effect of microwave sintering on the structural, optical and electrical properties of BaTiO3 nanoparticles. Journal of Materials Science: Materials in Electronics, 25 (1). pp. 529-537. ISSN 0957-4522

Zaid, M and Bhattacharjee, Pinaki Prasad (2014) Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel. Materials Characterization, 96. pp. 263-272. ISSN 1044-5803

Conference or Workshop Item

Gatti, J R and Bhattacharjee, P P (2014) Evolution of Microstructure and Texture during Severe Cold Rolling and Annealing Of Al-2.5%Mg and Al-2.5%Mg-0.2%Sc Alloys. In: TMS Light Metals, 16-20, February 2014, San Diego, CA; United States.

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan (2014) Flow behaviour of IMI 834 titanium alloy under hot deformation using Gleeble 3800. In: 4th Gleeble User Workshop India (GUWI), 2014, Madras, India.

Panigrahi, Bharat Bhooshan and Mane, R and Joshi, A and et al, . (2014) Densification of some MAX phases powders using sintering aids. In: World Congress on Powder Metallurgy and Particular Materials, 18-22 May 2014, Orlando, USA.

Pinaki, P B and Mohammed, Z A (2014) Effect of Warm-Rolling On the Formation of Microstructure and Microtexture of the Constituent Phases in a Duplex Steel. In: Materials Science Forum, 2-6, December 2013, Las Vegas, NV; United States.

Thesis

Ahmed, M Z (2014) Evolution of Microstructure and Crystallographic Texture during Thermo-Mechanical Processing by Warm-rolling In A Duplex Stainless Steel. PhD thesis, Indian Institute of Technology Hyderabad.

Akkisetty, B (2014) Molybdenum Oxide and Tin Oxide/Sulfide Nanostructured Materials for Anodes in Lithium Ion Batteries. PhD thesis, Indian Institute of Technology, Hyderabad.

Bhadak, B V (2014) Electron Back Scattered Diffraction Study of Deformation and Recrystallization Textures of Constituent Phases in a Ferritic-ustenitic Duplex Steel. Masters thesis, Indian Institute of Technology, Hyderabad.

Das, Asim and V, Kanchana (2014) Understanding Thermoelectric Properties from Density Functional Theory. Masters thesis, Indian Institute of Technology, Hyderabad.

Gottuparthi, V (2014) Studies on Structural and Physical Properties of Zr Substituted Na0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3-BaTiO3 Solid Solution for Vibration Sensor Application. Masters thesis, Indian Institute of Technology, Hyderabad.

I, Srikanth and Ch, Subrahmanyam (2014) Effect of Carbon nanotubes/nanofibers Reinforcement on Mechanical and Thermal Properties of CFRPs. PhD thesis, Indian Institute of Technology Hyderabad.

Jogi, T D (2014) Alumina Copper Composites for Thermoelectric Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Joshi, A M (2014) Sintering Kinetics of Cr2AlC Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Khan, N (2014) Effect of Solution-Hardening on the Evolution of Nanostructure in Ni-Fe alloys during Severe Plastic Deformation by High Pressure Torsion. Masters thesis, Indian Institute of Technology, Hyderabad.

M, Usha Rani (2014) Effect of processing conditions on the properties of nanostructured BiFeO3 obtained using different synthetic strategies. Masters thesis, Indian Institute of Technology Hyderabad.

Mane, R B (2014) Effect of Additives on Sintering Of Ti3SiC2 Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Meshram, M P (2014) Friction Stir Welding of Austenitic Stainless Steel (AISI- 316) To Ti-6Al-4V and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.