Items where Division is "Department of Material Science Engineering" and Year is 2014

A

Ahmed, M Z (2014) Evolution of Microstructure and Crystallographic Texture during Thermo-Mechanical Processing by Warm-rolling In A Duplex Stainless Steel. PhD thesis, Indian Institute of Technology Hyderabad.

Akkisetty, B (2014) Molybdenum Oxide and Tin Oxide/Sulfide Nanostructured Materials for Anodes in Lithium Ion Batteries. PhD thesis, Indian Institute of Technology, Hyderabad.

B

Bhadak, B V (2014) Electron Back Scattered Diffraction Study of Deformation and Recrystallization Textures of Constituent Phases in a Ferritic-ustenitic Duplex Steel. Masters thesis, Indian Institute of Technology, Hyderabad.

Bhattacharjee, P P and Sathiaraj, G D and Zaid, M and Gatti, J R and Lee, C and Tsai, C W and Yeh, J W (2014) Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy. Journal of Alloys and Compounds, 587. pp. 544-552. ISSN 0925-8388

Bhattacharjee, P P and Zaid, M and Sathiaraj, G D and Bhadak, B (2014) Evolution of Microstructure and Texture during Warm Rolling Of a Duplex Steel. Metallurgical and Materials Transactions A, 45 (4). pp. 2180-2191. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Saha, S and Gatti, J R (2014) Effect of change in strain path during cold rolling on the evolution of microstructure and texture in Al and Al-2.5%Mg. Journal of Materials Engineering and Performance, 23 (2). pp. 458-468. ISSN 1059-9495

D

Das, Asim and V, Kanchana (2014) Understanding Thermoelectric Properties from Density Functional Theory. Masters thesis, Indian Institute of Technology, Hyderabad.

Dey, Suhash Ranjan and Meshram, M P and Basanth Kumar, K (2014) Mechanical properties and microstructural characterization of friction stir welded aIsI 316 austenitic stainless steel. International conference on advances in Manufacturing and Materials engineering.

Durga Rao, T and Ramadurai, Ranjit and Asthana, Saket (2014) Enhanced magnetization and improved insulating character in Eu substituted BiFeO3. Journal of Applied Physics, 115 (12). ISSN 0021-8979

Durga Rao, T and Ranjith, R and Asthana, Saket (2014) Prominent improvement in the magnetic and electric properties of EU substituted bifeo3. Journal of Applied Physics.

G

Gatti, J R and Bhattacharjee, P P (2014) Evolution of Microstructure and Texture during Severe Cold Rolling and Annealing Of Al-2.5%Mg and Al-2.5%Mg-0.2%Sc Alloys. In: TMS Light Metals, 16-20, February 2014, San Diego, CA; United States.

Gatti, J R and Bhattacharjee, P P (2014) Microstructure and Texture of Al-2.5wt.%Mg Processed by Combining Accumulative Roll Bonding and Conventional Rolling. Journal of Materials Engineering and Performance. 10p. ISSN 1059-9495

Gatti, J R and Bhattacharjee, Pinaki Prasad (2014) Annealing textures of severely cold and warm-rolled Al-2.5 wt.%Mg alloy. Journal of Alloys and Compounds, 615. pp. 950-961. ISSN 0925-8388

Gottuparthi, V (2014) Studies on Structural and Physical Properties of Zr Substituted Na0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3-BaTiO3 Solid Solution for Vibration Sensor Application. Masters thesis, Indian Institute of Technology, Hyderabad.

I

I, Srikanth and Ch, Subrahmanyam (2014) Effect of Carbon nanotubes/nanofibers Reinforcement on Mechanical and Thermal Properties of CFRPs. PhD thesis, Indian Institute of Technology Hyderabad.

J

Jogi, T D (2014) Alumina Copper Composites for Thermoelectric Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Joshi, A M (2014) Sintering Kinetics of Cr2AlC Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

K

Karthik, T and Ramadurai, Ranjit and Asthana, Saket (2014) Evidence for the suppression of intermediate anti-ferroelectric ordering and observation of hardening mechanism in Na1/2Bi1/2TiO3 ceramics through cobalt substitution. AIP Advances, 4. ISSN 2158-3226

Khan, N (2014) Effect of Solution-Hardening on the Evolution of Nanostructure in Ni-Fe alloys during Severe Plastic Deformation by High Pressure Torsion. Masters thesis, Indian Institute of Technology, Hyderabad.

Khandelwal, M and Windle, A (2014) Origin of chiral interactions in cellulose supra-molecular microfibrils. Carbohydrate Polymers, 106 (1). pp. 128-131. ISSN 0144-8617

Khandelwal, Mudrika and Windle, A (2014) Small angle x-ray study of cellulose macromolecules produced by tunicates and bacteria. Inter National Journal of Biological Macromolecules.

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan (2014) Flow behaviour of IMI 834 titanium alloy under hot deformation using Gleeble 3800. In: 4th Gleeble User Workshop India (GUWI), 2014, Madras, India.

L

Lahiri, A and Abinandanan, T A and Gururajan, M P and Bhattacharya, Saswata (2014) Effect of epitaxial strain on phase separation in thin films. Philosophical Magazine Letters, 94 (11). pp. 702-707. ISSN 0950-0839 (In Press)

M

M, Usha Rani (2014) Effect of processing conditions on the properties of nanostructured BiFeO3 obtained using different synthetic strategies. Masters thesis, Indian Institute of Technology Hyderabad.

Mallesham, B and Ramadurai, Ranjit and Manivelraja, M (2014) Scandium induced structural transformation and B':B' cationic ordering in Pb(Fe0.5Nb0.5)O3 multiferroic ceramics. Journal of Applied Physics, 116 (3). ISSN 0021-8979

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2014) CuIn1-xGaxSe2 thin-film absorber layers for solar photovoltaics fabricated by two-stage pulsed current electrodeposition. Materials Letters, 118 (1). pp. 158-160. ISSN 0167-577X

Mane, R B (2014) Effect of Additives on Sintering Of Ti3SiC2 Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Manish, P M and Basanth Kumar, K and Dey, Suhash Ranjan (2014) Friction Stir Welding of Austenitic Stainless Steel by PCBN Tool and its Joint Analyses. International Conference on Materials Manufacturing ICMPC.

Manivannan, A and S K, Myana and Miriyala, K and Sahu, S and Ramadurai, R (2014) Low power ovonic threshold switching characteristics of thin GeTe6 films using conductive atomic force microscopy. Applied Physics Letters, 105 (243501). pp. 1-5. ISSN 0003-6951

Meshram, M P (2014) Friction Stir Welding of Austenitic Stainless Steel (AISI- 316) To Ti-6Al-4V and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

P

Panigrahi, Bharat Bhooshan and Mane, R and Joshi, A and et al, . (2014) Densification of some MAX phases powders using sintering aids. In: World Congress on Powder Metallurgy and Particular Materials, 18-22 May 2014, Orlando, USA.

Pinaki, P B and Mohammed, Z A (2014) Effect of Warm-Rolling On the Formation of Microstructure and Microtexture of the Constituent Phases in a Duplex Steel. In: Materials Science Forum, 2-6, December 2013, Las Vegas, NV; United States.

R

Ramakrishna, P. E. Seeram and Khandelwal, Mudrika (2014) Attributes of Engineers and Engineering Education for the Twenty-First-Century World. Journal of Engineering Education Transformations. pp. 47-55. ISSN 2349-2473

V

Vasudevan, R and Karthik, T and Selvakumar, D and Ganesan, S and Jayavel, R (2014) Effect of microwave sintering on the structural, optical and electrical properties of BaTiO3 nanoparticles. Journal of Materials Science: Materials in Electronics, 25 (1). pp. 529-537. ISSN 0957-4522

Z

Zaid, M and Bhattacharjee, Pinaki Prasad (2014) Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel. Materials Characterization, 96. pp. 263-272. ISSN 1044-5803