Items where Year is 2012

Masters

A L, Revathy and Dutta, Asudeb (2012) Design of Capacitive Micromachined Ultrasonic Transducers for Application in Electronic Travel Aid for the Blind. Masters thesis, Indian Institute of Technology Hyderabad.

B, Mrunalini and Eswaran, Vinayak (2012) Development of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation. Masters thesis, Indian Institute of Technology Hyderabad.

C H, Trivikrama Rao and Dutta, Asudeb (2012) Smart Technology for Early Crack Detection of Concrete Wall. Masters thesis, Indian Institute of Technology Hyderabad.

Chaudhary, Vijay Prakash and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path During Cold Rolling on the Evolution of Microstructure, Texture And Hardness Properties of Nickel With Extremely Coarse Initial Grain Size. Masters thesis, Indian Institute of Technology Hyderabad.

Damalla, Y and B, Umashankar (2012) Settlement Due to Circular Load on Finite Two- Layered Soil System. Masters thesis, Indian Institute of Technology, Hyderabad.

Devarkonda, S G K (2012) Modeling and Analysis of Power Systems Using Synchrophasors. Masters thesis, Indian Institute of Technology Hyderabad.

Dighe, A S and Eswaran, Vinayak (2012) Numerical Computation of Compressible Fluid Flows. Masters thesis, Indian Institute of Technology Hyderabad.

G V S S, Praneeth Varma and Sharma, G V V (2012) Exact Error Analysis For Decode and Forward Multirelay Cooperative Systems an Algorithmic Approach. Masters thesis, Indian Institute of Technology Hyderabad.

Gali, S (2012) Investigation of Fiber Reinforced Cementitious Matrix Composite Wrapped Stack Bonded Brick Masonry under Compressive Load. Masters thesis, Indian Institute of Technology, Hyderabad.

Garala, Sathish Kumar and Pandey, Ashok Kumar (2012) Analysis of Linear and Non-Linear Stress-Strain Properties for Graphene and Single Walled Carbon Nanotubes. Masters thesis, Indian Institute of Technology Hyderabad.

Goud, N S (2012) Analysis of Power System State Estimation. Masters thesis, Indian Institute of Technology Hyderabad.

Gupta, A (2012) Graph Kernels. Masters thesis, Indian Institute of Technology, Hyderabad.

Jallu, M and Saride, Sireesh (2012) Study on a Combined Ground Improvement Technic to Facilitate Rapid Embankment Construction on Soft Soil Deposits. Masters thesis, Indian Institute of Technology, Hyderabad.

Jancy, F and B, Umashankar (2012) Behavior of Granular Pile and Granular Piled Raft. Masters thesis, Indian Institute of Technology, Hyderabad.

Joshi, Mohit and Bhattacharjee, Pinaki Prasad (2012) Effect of Strain Path Change during Cold Rolling On the Evolution of Deformation and Recrystallization Textures of High Purity Nickel. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Ravi and K, Venkatasubbaiah (2012) Numerical Study on Buoyancy Induced Flow in Enclosures Connected By Horizontal Vents. Masters thesis, Indian Institute of Technology Hyderabad.

L, Harish and Amirtham, Rajagopal (2012) Computational Homogenisation and Failure Modelling Of Periodic Composites. Masters thesis, Indian Institute of Technology, Hyderabad.

M D, Jamal and Dutta, Asudeb and Singh, Shiv Govind (2012) Spur Reduction in Phase Lock Loop Using Charge Pump Current Matching Technique. Masters thesis, Indian Institute of Technology Hyderabad.

Malempati, N (2012) Design and Implementation of a Data Stream Management System. Masters thesis, Indian Institute of Technology, Hyderabad.

N, Om Prakash Raj and K, Venkatasubbaiah (2012) Design and Analysis of Generic Hypersonic Scramjet Inlets. Masters thesis, Indian Institute of Technology Hyderabad.

Namdeo, C P and B, Venkatesham (2012) Free Vibration Analysis of HVAC Ducts. Masters thesis, Indian Institute of Technology Hyderabad.

P, Vinay kumar and S, Suryakumar (2012) Evaluation of Rapid Manufacturing Solutions for Improved Knee Implants Using Finite Element Analysis. Masters thesis, Indian Institute of Technology Hyderabad.

P M, Shenu and Jana, Soumya (2012) Automated Detection of Dry and Water-Filled Potholes Using Multimodal Sensing System. Masters thesis, Indian Institute of Technology Hyderabad.

Pai, R N and M, Ramji (2012) Effect of Interface Crack and Corner Singularity in Bimaterial System – Experimental and Numerical Investigation. Masters thesis, Indian Institute of Technology Hyderabad.

Pal, M K (2012) Modeling Strong Discontinuities Using Generalized Finite Element Method (GFEM). Masters thesis, Indian Institute of Technology, Hyderabad.

Pankaj, Pankaj and Dey, Suhash Ranjan (2012) Friction Stir Welding (FSW) Studies of Dissimilar Al-Based Alloys Using Different Pin Profiles. Masters thesis, Indian Institute of Technology Hyderabad.

R, Sai Chandra Teja and Dutta, Asudeb (2012) Phase Noise Reduction in an Oscillator Using Harmonic Mixing Technique. Masters thesis, Indian Institute of Technology Hyderabad.

R, Vijay Kumar and Dutta, Asudeb (2012) Design of an Rf Baw Resonator. Masters thesis, Indian Institute of Technology Hyderabad.

Reddy, D S S (2012) 3d Object Reconstruction from Multiple Views: A Compressive Sensing Framework. Masters thesis, Indian Institute of Technology Hyderabad.

Reddy, S P (2012) A Reconfigurable Aperture Coupled Microstrip Patch Antenna with Beam Steering Capability on Silicon. Masters thesis, Indian Institute of Technology Hyderabad.

Saha, S and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path during Cold Rolling on the Evolution of Microstructure, Texture and Hardness Properties of Different Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Sajan, S G and Dey, Suhash Ranjan (2012) Friction Stir Welding of Aluminum 6082 with Mild Steel and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

Shrivastava, J M (2012) Streaming Algorithm for K-Median Dynamic Geometric Problem. Masters thesis, Indian Institute of Technology, Hyderabad.

T, Raja jayasingh and Banerjee, Raja (2012) Numerical Analysis of Thermal Spray Coating Process. Masters thesis, Indian Institute of Technology Hyderabad.

Tariq, F and K V L, Subramaniam (2012) Evaluation of Slag and Fly Ash for High Volume Cement Replacements Using Ternary Blended Concrete and Lime Activation. Masters thesis, Indian Institute of Technology, Hyderabad.

Tiwari, P (2012) Flash Aware Database Management System. Masters thesis, Indian Institute of Technology, Hyderabad.

V B, Saambhavi (2012) Design of Voice-Controlled Intelligent Robot. Masters thesis, Indian Institute of Technology Hyderabad.

Veerkar, V V and M, Ramji (2012) A Study on Experimental Determination of Mixed-Mode Sif’s Using Digital Photoelasticity and DIC. Masters thesis, Indian Institute of Technology Hyderabad.

Y, Vikas and Dutta, Asudeb (2012) Analysis of Active Transformers and Their Impact on Voltage Controlled Oscillators. Masters thesis, Indian Institute of Technology Hyderabad.