Items where Subject is "Materials Engineering > Composite materials"

B

Bhati, Saurabhch and Kamper, Herman and Kodukula, Sri Rama Murty (2018) Phoneme Based Embedded Segmental K-Means for Unsupervised Term Discover. In: ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, 15-20 April 2018, Calgary; Canada.

Bhati, Saurabhch and Kamper, Herman and Kodukula, Sri Rama Murty (2018) Phoneme Based Embedded Segmental K-Means for Unsupervised Term Discovery. In: ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, 15-20 April 2018, Calgary; Canada.

Bhise, V S and Kashfuddoja, M and M, Ramji (2014) Optimization of circular composite patch reinforcement on damaged carbon fiber reinforced polymer laminate involving both mechanics-based and genetic algorithm in conjunction with 3D finite element analysis. Journal of Composite Materials, 48 (22). pp. 2679-2695. ISSN 0021-9983

D

Das, Partha Pratim (2023) Multi-objective optimization of mechanical properties of chemically treated bio-based composites using response surface methodology. Composites Part C, 10. p. 100337. ISSN 2666-6820

G

Gomathi, P T and Sahatiya, P and Badhulika, Sushmee (2017) Large-Area, Flexible Broadband Photodetector Based on ZnS-MoS2 Hybrid on Paper Substrate. Advanced Functional Materials, 27 (31). p. 1701611. ISSN 1616-301X

Gottuparthi, V (2014) Studies on Structural and Physical Properties of Zr Substituted Na0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3-BaTiO3 Solid Solution for Vibration Sensor Application. Masters thesis, Indian Institute of Technology, Hyderabad.

I

I, Srikanth and N, Padmavathi and Kumar, Suresh and Ghosal, P and Kumar, Anil and Ch, Subrahmanyam (2013) Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites. Composites Science and Technology, 80. pp. 1-7. ISSN 0266-3538

Ishtiyak, Mohd and Bhattacharjee, P. P. and et al, . (2021) Syntheses, crystal structures, optical, and theoretical study of two ternary chalcogenides CsSc5Te8 and Cs0.6(1)Ti6Se8 with tunnel structures. Solid State Sciences, 114. p. 106577. ISSN 12932558

J

J, Saha and G, Ummethala and Malladi, S R K and Bhattacharjee, Pinaki Prasad (2021) Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling. Intermetallics (129). ISSN 0966-9795

K

Khedkar, S (2014) Progressive Damage Analysis of Composite Laminates Under Compression. Masters thesis, Indian Institute of Technology, Hyderabad.

M

Mohammad, Kashfuddoja (2014) Experimental and Numerical Study of Composite Patch Repair on Open Hole Carbon Fiber Reinforced Polymer Panel under Tensile Loading. PhD thesis, IIT Hyderabad.

Murty, B S (2023) Designing a thermodynamically stable and intrinsically ductile refractory alloy. Journal of Alloys and Compounds, 939. p. 168597. ISSN 0925-8388

N

Nasani, Narendar and Shakel, Zinaida and Loureiro, Francisco J.A. and Panigrahi, Bharat Bhooshan and Kale, Bharat B. and Fagg, Duncan P. (2021) Exploring the impact of sintering additives on the densification and conductivity of BaCe0.3Zr0.55Y0.15O3-δ electrolyte for protonic ceramic fuel cells. Journal of Alloys and Compounds, 862. p. 158640. ISSN 0925-8388

P

Pachalla, S K S and S, Suriya Prakash (2017) Efficient near surface mounting CFRP strengthening of pretensioned hollowcore slabs with opening - An experimental study. Composite Structures, 162. pp. 28-38. ISSN 0263-8223

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Joardar, Joydip and Sarada, Bulusu V. and Tamboli, Rameez R. and Hu, Yixuan and Zhang, Yumeng and Wang, Xiaodong and Dey, Suhash Ranjan (2021) An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy alloy thin films. Scientific Reports, 11 (1). ISSN 2045-2322

R

Rajesh Kannan, A. and Siva Shanmugam, N. and Palguna, Yasam and Girinath, B. and Lee, Wonjoo and Yoon, Jonghun (2023) Effect of double-side welding on the microstructural characteristics and mechanical performance of dissimilar AA6061-AA5052 aluminium alloys. Materials Letters, 331. ISSN 0167-577X

Rani, P. Swetha and Andhavarapu, Sivaganesh and Kodukula, Sri Rama Murty (2020) Significance of Phase in DNN based speech enhancement algorithms. In: National Conference on Communications (NCC), 21-23 February 2020, Kharagpur, India.

S

Sankala, Sreekanth and Mohammad Rafi, B. Shaik and Kodukula, Sri Rama Murty (2020) Self Attentive Context dependent Speaker Embedding for Speaker Verification. In: National Conference on Communications (NCC), 21-23 February 2020, Kharagpur, India.

Singh, Vajinder and Mondal, Chandan and Sarkar, Rajdeep and Bhattacharjee, Pinaki Prasad and Ghosal, P (2021) Effects of Cr alloying on the evolution of solidification microstructure and phase transformations of high-Nb containing γ-TiAl based alloys. Intermetallics, 131. p. 107117. ISSN 0966-9795

V

Vijayan, Karthika and Kodukula, Sri Rama Murty and Li, Haizhou (2019) Allpass Modeling of Phase Spectrum of Speech Signals for Formant Tracking. In: Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, 18-21 November 2019, Lanzhou; China.