Items where Subject is "Materials Engineering > Materials engineering"

A

A, Rajesh Kannan and N, Siva Shanmugam and Yasam, Palguna and et al, . (2023) Effect of double-side welding on the microstructural characteristics and mechanical performance of dissimilar AA6061-AA5052 aluminium alloys. Materials Letters, 331 (133444). pp. 1-4. ISSN 0167-577X

Aamani, S. and Das, C. R. and Martha, Surendra Kumar and Albert, S. K. and Panigrahi, Bharat Bhooshan (2022) Influence of Nitrogen on Grain Size-Dependent Sensitisation and Corrosion Resistance of 316L (N) Austenitic Stainless Steels. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Aamani, S. and Das, C.R. and Martha, Surendra K. and Panigrahi, Bharat B. (2021) Effect of nitrogen on grain boundary character distribution in 316 stainless steel. Materials Letters, 288. p. 129387. ISSN 0167577X

Ade, Someshwar Sanjay and Kirar, Pavan Kumar and Chandrala, Lakshmana Dora and Sahu, Kirti Chandra (2023) Droplet size distribution in a swirl airstream using in-line holography technique. Journal of Fluid Mechanics, 954 (A39). ISSN 0022-1120

Adepu, S and Gaydhane, M K and Kakunuri, M and Sharma, Chandra Shekhar and Khandelwal, Mudrika and Eichhorn, S J (2017) Effect of micropatterning induced surface hydrophobicity on drug release from electrospun cellulose acetate nanofibers. Applied Surface Science. ISSN 0169-4332 (In Press)

Adepu, Shivakalyani and Khandelwal, Mudrika (2020) Bacterial cellulose with microencapsulated antifungal essential oils: a novel double barrier release system. Materialia. p. 100585. ISSN 2589-1529 (In Press)

Adepu, Shivakalyani and Khandelwal, Mudrika (2017) Broad-spectrum antimicrobial activity of bacterial cellulose silver nanocomposites with sustained release. Journal of Materials Science. pp. 1-14. ISSN 0022-2461 (In Press)

Adepu, Shivakalyani and Khandelwal, Mudrika (2020) Ex-situ modification of bacterial cellulose for immediate and sustained drug release with insights into release mechanism. Carbohydrate Polymers, 249 (116816). ISSN 01448617

Ahmed, M Z (2014) Evolution of Microstructure and Crystallographic Texture during Thermo-Mechanical Processing by Warm-rolling In A Duplex Stainless Steel. PhD thesis, Indian Institute of Technology Hyderabad.

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel. Isij International, 54 (12). pp. 2844-2853. ISSN 0915-1559

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure, Texture, and Tensile Properties of a Severely Warm-Rolled and Annealed Duplex Stainless Steel. Steel Research International, 87 (4). pp. 472-483. ISSN 1611-3683

Ahmed, M. Zaid and Chadha, K. and Reddy, S. R. and Shahriari, D. and Bhattacharjee, Pinaki Prasad and Jahazi, M. (2020) Influence of Process Parameters on Microstructure Evolution During Hot Deformation of a Eutectic High-Entropy Alloy (EHEA). Metallurgical and Materials Transactions A, 51 (12). pp. 6406-6420. ISSN 1073-5623

Ahmed, Md Soif and Biswas, Chinmoy and Banerjee, Dipanjan and Chetti, Prabhakar and Yang, Jye-Shane and Soma, Venugopal Rao and Raavi, Sai Santosh Kumar (2022) Femtosecond Third-Order Non-Linear Optical Properties of Unconstrained Green Fluorescence Protein Chromophores. Frontiers in Physics, 10. pp. 1-12. ISSN 2296-424X

Akkisetty, B (2014) Molybdenum Oxide and Tin Oxide/Sulfide Nanostructured Materials for Anodes in Lithium Ion Batteries. PhD thesis, Indian Institute of Technology, Hyderabad.

Anand, D and Khandelwal, Mudrika (2015) Novel conducting paper from bacterial cellulose and poly aniline. Project Report. Technical volume in 29th Engineering Congress, Hyderabad under the sub-theme “Manufacturing” Technical Session V, Hyderabad.

Anand, D and Khandelwal, Mudrika (2015) Route to conducting nanocomposites by simultaneous in situ polymerization of aniline and matrix assembly from bacterial cellulose nanowhiskers. Project Report. International Conference "Plast India-2015", Gandhinagar.

Anand, Divya and Khandelwal, Mudrika (2015) Conducting flexible paper based on Bacterial cellulose and Polyaniline composites. Masters thesis, Indian Institute of Technology Hyderabad.

Anandkumar, Mariappan and Bagul, Pratik Mahendra and Deshpande, Atul Suresh (2020) Structural and luminescent properties of Eu3+ doped multi-principal component Ce0.2Gd0.2Hf0.2La0.2Zr0.2O2 nanoparticles. Journal of Alloys and Compounds, 838 (155595). ISSN 09258388

Anandkumar, Mariappan and Bhattacharya, Saswata and Deshpande, Atul Suresh (2019) Low temperature synthesis and characterization of single phase multi-component fluorite oxide nanoparticle sols. RSC Advances, 9 (46). pp. 26825-26830. ISSN 2046-2069

Anbarasu, V and Manigandan, A and Karthik, T and Sivakumar, K (2012) Inducing multiferroic behaviour in the diamagnetic Y2O3 system. Journal of Materials Science-Materials in Electronics, 23 (6). pp. 1201-1209. ISSN 0957-4522

Anju, P V and Khandelwal, Mudrika and Subahan, Mabu P and et al, . (2020) In situ synthesized hydro-lipophilic nano and micro fibrous bacterial cellulose: polystyrene composites for tissue scaffolds. Journal of Materials Science. pp. 1-10. ISSN 0022-2461

Arora, Vajinder Singh and Bhattacharjee, Pinaki Prasad (2020) Microstructure, Phase Stability and High Temperature Deformation Behavior in γ-TiAl based (Ti-45Al-8Nb-xCr-0.2B) Alloys. PhD thesis, Indian Institute of Technology Hyderabad.

Arvindha Babu, D. and Majumdar, Bhaskar and Sarkar, R. and Murty, B S (2021) Phase Stability of Rapidly Solidified (Fe1−xNix)88Zr7B4Cu1 Ribbons. Metallurgical and Materials Transactions A, 52 (2). pp. 560-573. ISSN 1073-5623

Asgar, J and Lingam, R and Reddy, V N (2013) Tool path influence on electric pulse aided deformation during incremental sheet metal forming. In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 6–10 January 2014, Melbourne, Australia.

Athira, K. S. and Pandey, P. and Chatterjee, Subhradeep and et al, . (2022) Laser welding of a W-free precipitation strengthened Co-base superalloy. Journal of Materials Science, 57 (13). pp. 7085-7100. ISSN 0022-2461

B

B, Mallesham and B, Viswanath and Ramadurai, Ranjit (2016) Effect of crystal structure and cationic order on phonon modes across ferroelectric phase transformation in Pb(Fe0.5-xScxNb0.5)O3 bulk ceramics. AIP Advances, 6 (1). pp. 1-8. ISSN 2158-3226

B, Santhosh and Chatterjee, Subhradeep (2018) Recyclability of Mixed Maraging and Stainless Steel Scraps. Masters thesis, Indian Institute of Technology Hyderabad.

B., Pravallika and Bhattacharya, Saswata and Dutta-Gupta, S (2022) Numerical study of propagating surface plasmons in complex alloy thin films. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

B., Pravallika and Dutta-Gupta, S. (2022) Effect of phase separation on the behavior of surface plasmons in Ag-Cu alloy thin films. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Babu, Deepu J. and Kotagiri, Venkata Rao (2023) Perylene Diimide-Containing Dynamic Hyper-crosslinked Ionic Porous Organic Polymers: Modulation of Assembly and Gas Storage. ACS Applied Polymer Materials, 5 (3). pp. 2097-2104. ISSN 2637-6105

Bakshi, Payal and Pappu, Asokan and Kumar Bharti, Dhiraj (2022) Transformation of flue gas desulfurization (FGD) gypsum to β-CaSO4·0.5H2O whiskers using facile water treatment. Materials Letters, 308. pp. 1-5. ISSN 0167-577X

Bandaru, Pravallika and Ummethala, Govind and Malladi, Sai Rama Krishna and Dutta-Gupta, Shourya (2022) Microstructure Dictates the Behavior of Plasmons in Nanostructured Ag-Cu Alloy Films. The Journal of Physical Chemistry C, 126 (37). pp. 15915-15923. ISSN 1932-7447

Bandi, Mallesham (2017) Structure, Cation Ordering and Phonon studies of Pb(Fe 0.5-x Sc x Nb 0.5 )O 3 , a Multiferroic Relaxor : Bulk and Thin Films. PhD thesis, Indian Institute of Technology Hyderabad.

Bandi, Suresh and Hastak, Vikram and Pavithra, Chokkakula L P and et al, . (2019) Graphene/chitosan-functionalized iron oxide nanoparticles for biomedical applications. Journal of Materials Research. pp. 1-11. ISSN 0884-2914

Bandyopadhyay, Soumya and Jogi, Tushar and Miriyala, Kumaraswamy and Ramadurai, Ranjit and Bhattacharya, Saswata (2016) A phase-field study of domain dynamics in ferroelectric BCT-BZT system. MRS Advances, 1 (40). pp. 2783-2788. ISSN 2059-8521

Basak, Shibabrata and Ganapathy, Swapna and Malladi, Sairam K and et al, . (2019) Designing Reliable Operando TEM Experiments to Study (De)lithiation Mechanism of Battery Electrodes. Journal of The Electrochemical Society, 166 (14). A3384-A3386. ISSN 0013-4651

Basanth Kumar, K and Saxena, Kuldeep K and Dey, Suhash Ranjan and Pancholi, Vivek and Bhattacharjee, Amit (2017) Peak stress studies of hot compressed TiHy 600 alloy. Materials Today: Proceedings, 4 (8). pp. 7365-7374. ISSN 2214-7853

Belkacemi, L.T. and Vaidya, M. and Sevlikar, S. and et al, . (2022) Intrinsic heterogeneity of grain boundary states in ultrafine-grained Ni: A cross-scale study by SIMS and radiotracer analyses. Materialia, 22. pp. 1-12. ISSN 2589-1529

Bhadak, B V (2014) Electron Back Scattered Diffraction Study of Deformation and Recrystallization Textures of Constituent Phases in a Ferritic-ustenitic Duplex Steel. Masters thesis, Indian Institute of Technology, Hyderabad.

Bhagath Singh, G V P and K V L, Subramaniam and Biernack, J (2017) Method for Direct Determination of Glassy Phase Dissolution in Hydrating Fly Ash-Cement System Using X-ray Diffraction. Journal of the American Ceramic Society, 100 (1). pp. 403-412. ISSN 0002-7820

Bhanu, Sankara Rao K. (2023) High speed nanoindentation aided correlative study between local mechanical properties and chemical segregation in equiatomic MoNb and MoNbTi alloys. Journal of Materials Research, 38 (11). pp. 2919-2929. ISSN 0884-2914

Bhar, Madhushri and Dey, Avishek and Ghosh, Sourav and van Spronsen, Matthijs A. and Selvaraj, Vimalnath and Kaliprasad, Y. and Krishnamurthy, Satheesh and Martha, Surendra Kumar (2022) Plasma jet printing induced high-capacity graphite anodes for sustainable recycling of lithium-ion batteries. Carbon, 198. pp. 401-410. ISSN 0008-6223

Bharti, V.K. and Sharma, Chandra Shekhar and Khandelwal, Mudrika (2022) Ultra-high-rate lithium-sulfur batteries with high sulfur loading enabled by Mn2O3-carbonized bacterial cellulose composite as a cathode host. Electrochimica Acta, 422. pp. 1-15. ISSN 0013-4686

Bharti, Vikram Kishore and Pathak, Anil D. and Anjan, Apurva and Sharma, Chandra Shekhar and Khandelwal, Mudrika (2022) Covalently Confined Sulfur Composite with Carbonized Bacterial Cellulose as an Efficient Cathode Matrix for High-Performance Potassium–Sulfur Batteries. ACS Sustainable Chemistry & Engineering. pp. 1-13. ISSN 2168-0485

Bharti, Vikram Kishore and Sharma, Chandra Shekhar and Khandelwal, Mudrika and et al, . (2022) Flexible and free-standing bacterial cellulose derived cathode host and separator for lithium-sulfur batteries. Carbohydrate Polymers, 293. pp. 1-16. ISSN 0144-8617

Bhat, Anantha P. and Joshi, Manish Chandra and Malladi, Sairam K and et al, . (2022) Ba0.85Ca0.15Zr0.1Ti0.90O3/CoFe2O4/Ba0.85Ca0.15Zr0.1Ti0.90O3Nanoscale Composite Films with 2-2 Connectivity for Magnetoelectric Actuation. ACS Applied Nano Materials. pp. 1-12. ISSN 2574-0970

Bhat, Anantha P. and Ramadurai, Ranjith (2022) Estimation of gradient size of interfacial strain and its optimization for effective magnetoelectric coupling in (CoFe2O4) – (0.93Na0.5Bi0.5TiO3 – 0.07BaTiO3), 2-2 nano-composites. Ceramics International, 48 (6). pp. 7622-7628. ISSN 0272-8842

Bhati, Saurabhch and Kamper, Herman and Kodukula, Sri Rama Murty (2018) Phoneme Based Embedded Segmental K-Means for Unsupervised Term Discover. In: ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, 15-20 April 2018, Calgary; Canada.

Bhati, Saurabhch and Kamper, Herman and Kodukula, Sri Rama Murty (2018) Phoneme Based Embedded Segmental K-Means for Unsupervised Term Discovery. In: ICASSP, IEEE International Conference on Acoustics, Speech and Signal Processing - Proceedings, 15-20 April 2018, Calgary; Canada.

Bhattacharjee, P P and Joshi, M and Chaudhary, V P and Gatti, J R and Zaid, M (2013) Texture evolution during cross rolling and annealing of high-purity nickel. Metallurgical and Materials Transactions A, 44 (6). pp. 2707-2716. ISSN 1073-5623

Bhattacharjee, P P and Sathiaraj, G D and Zaid, M and Gatti, J R and Lee, C and Tsai, C W and Yeh, J W (2014) Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy. Journal of Alloys and Compounds, 587. pp. 544-552. ISSN 0925-8388

Bhattacharjee, P P and Takatsuji, Y and Miyajima, Y and Terada, D and Tsuji, N (2013) Recrystallization Texture of Heavily Cold Rolled Polycrystalline Nickel Sheets With and Without Strong Starting Cube Texture. In: 5th International Conference on Recrystallization and Grain Growth, ReX and GG 2013, 5-10, May 2013, Sydney, NSW; Australia.

Bhattacharjee, P P and Zaid, M and Sathiaraj, G D and Bhadak, B (2014) Evolution of Microstructure and Texture during Warm Rolling Of a Duplex Steel. Metallurgical and Materials Transactions A, 45 (4). pp. 2180-2191. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad (2023) Annealing-Mediated Microduplex Structure and Texture Evolution in Severely Cold-Rolled Nanolamellar Pearlite: A Perspective on the Effect of Starting Inter-lamellar Spacing. Metallurgical and Materials Transactions A, 54 (4). pp. 1199-1212. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Joshi, M and Chaudhary, V P and Zaid, M (2013) The Effect of Starting Grain Size on the Evolution of Microstructure and Texture in Nickel during Processing by Cross-Rolling. Materials Characterization, 76. pp. 21-27. ISSN 1044-5803

Bhattacharjee, Pinaki Prasad and Ray, R K and Tsuji, N (2010) Evolution of deformation and recrystallization textures in high-purity Ni and the Ni-5 at. pct W alloy. Metallurgical and Materials Transactions A, 41 (11). pp. 2856-2870. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Reddy, S R and Saha, R and et al, . (2019) Texture homogeneity and stability in severely warm-rolled and annealed ultrafine pearlite. Materials Science and Technology, 35 (4). pp. 437-447. ISSN 0267-0836

Bhattacharjee, Pinaki Prasad and Saha, S and Gatti, J R (2014) Effect of change in strain path during cold rolling on the evolution of microstructure and texture in Al and Al-2.5%Mg. Journal of Materials Engineering and Performance, 23 (2). pp. 458-468. ISSN 1059-9495

Bhattacharjee, Pinaki Prasad and Takatsuji, Y and Miyajima, Y and Terada, D and Tsuji, N (2012) Evolution of microstructure and texture during cold rolling and annealing of a highly cube-textured ({001}(100)) polycrystalline nickel sheet. Metallurgical and Materials Transactions A, 43 (7). pp. 2442-2452. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Tsuji, N (2011) Development of highly cube textured nickel superconductor substrate tapes by accumulative roll bonding (ARB). International Journal of Materials Research, 102 (2). pp. 173-182. ISSN 1862-5282

Bhattacharjee, Pinaki Prasad and Tsuji, N (2011) Development of textured coated superconductor substrate tapes by severe plastic deformation processing. In: 5th International Conference on Nanomaterials by Severe Plastic Deformation, NanoSPD5, 21-25, March 2011, Nanjing; China.

Bhattacharjee, Pinaki Prasad and Tsuji, N (2011) Effect of Ultrahigh Straining on the evaluation of Cube Texture ({100}<100>) in High Purity Nicke. In: 16th International Conference on Textures of Materials ICOTOM, 12-17 December 2011, Mumbai, India..

Bhattacharjee, Pinaki Prasad and Tsuji, N (2012) Effect of ultrahigh straining on the evolution of cube texture ({100}<100>) in high purity nickel. In: International Conference on Textures of Materials, 12-17, December 2011, Mumbai; India.

Bhattacharjee, Pinaki Prasad and Tsuji, N and Ray, R K (2011) Effect of initial grain size on the evolution of {001}<001> texture in severely deformed and annealed high-purity nickel. Metallurgical and Materials Transactions A, 42 (9). pp. 2769-2780. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Vaidya, Mayur (2023) Effect of ultrafine microstructure on interdiffusion-driven phase transformations in Ni-Sn sandwich diffusion couples. Materials Today Communications, 35. p. 105843. ISSN 2352-4928

Bhattacharjee, T and Zheng, R and Chong, Y and Sheikh, S and Guo, S and Clark, I T and Okawa, T and Wani, I S and Bhattacharjee, Pinaki Prasad and Shibata, A and Tsuji, N (2017) Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy. Materials Chemistry and Physics. ISSN 0254-0584 (In Press)

Bhattacharya, Rahul and Annasamy, Murugesan and Murty, B S and et al, . (2022) Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline AlxCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys. Journal of Materials Research, 37 (4). pp. 959-975. ISSN 0884-2914

Bhattacharya, Saswata and Bandyopadhyay, S and Choudhury, A (2016) Phase-field modeling of electrochemical phenomena. Journal of the Indian Institute of Science, 96 (3). pp. 257-268. ISSN 0970-4140

Biswas, Chinmoy and Gangadhar, Palivela Siva and Giribabu, Lingamallu and Chetti, Prabhakar and Banerjee, Dipanjan and Soma, Venugopal Rao and Raavi, Sai Santosh Kumar (2022) Ultrafast intramolecular charge transfer dynamics and nonlinear optical properties of phenothiazine-based push–pull zinc porphyrin. Journal of Photochemistry and Photobiology A: Chemistry, 433. pp. 1-14. ISSN 1010-6030

Biswas, Krishanu and Yeh, Jien-Wei and Bhattacharjee, Pinaki P. and DeHosson, Jeff Th.M. (2020) High entropy alloys: Key issues under passionate debate. Scripta Materialia, 188. pp. 54-58. ISSN 13596462

Bodapati, Bolla Reddy and Bhattacharjee, Pinaki Prasad (2019) Uniaxial compression and spherical indentation behavior of porous copper. PhD thesis, Indian institute of technology Hyderabad.

Bruyer, E. and Sayede, A. and Ramadurai, Ranjit and et al, . (2015) Insight on the ferroelectric properties in a (BiFeO3)2(SrTiO3)4 superlattice from experiment and ab initio calculations. Applied Physics Letters, 107 (4). 042904. ISSN 0003-6951

Burla, Aditya and Khandelwal, Mudrika and Vaidya, M. (2022) Antibacterial properties of Cu containing complex concentrated alloys. Materials Today Communications, 33 (104915). pp. 1-8. ISSN 2352-4928

C

C, Elango (2013) Effect of Stacking Fault Energy on Microstructure and Texture Evolution in Ni-Co Alloys during Severe Plastic Deformation by High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Cao, Bo and Iwamoto, Takeshi and Bhattacharjee, Pinaki Prasad (2020) An experimental study on strain-induced martensitic transformation behavior in SUS304 austenitic stainless steel during higher strain rate deformation by continuous evaluation of relative magnetic permeability. Materials Science and Engineering: A, 774. ISSN 0921-5093

Cao, Y and Bhattacharya, Saswata and Shen, J and Randall, C A and Chen, L Q (2013) Role of polaron hopping in leakage current behavior of a SrTiO3 single crystal. Journal of Applied Physics, 114 (22). pp. 1-7. ISSN 0021-8979

Chadha, Kanwal (2013) The Effect of Strain Reversal during High Pressure Torsion on the Evolution of Microstructure, Texture and Hardness Properties of Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Chadha, Kanwal and Bhattacharjee, Pinaki Prasad and Jahazi, M (2015) The Effect of Strain Reversal during High Pressure Torsion on the Microstructure Evolution and Texture of Aluminum Alloys. In: Characterization of Minerals, Metals, and Materials 2015. Springer, Cham, pp. 107-114.

Chadha, Kanwal and Shahriari, D and Tremblay, R and Bhattacharjee, Pinaki Prasad and Jahazi, M (2017) Deformation and Recrystallization Behavior of the Cast Structure in Large Size, High Strength Steel Ingots: Experimentation and Modeling. Metallurgical and Materials Transactions A, 48 (9). pp. 4297-4313. ISSN 1073-5623

Chakraborty, Pritam K. and Azadmanjiri, Jalal and Pavithra, Chokkakula L. P. and Wang, Xiaojian and Masood, Syed H. and Dey, Suhash Ranjan and Wang, James (2020) Advancements in Therapeutics via 3D Printed Multifunctional Architectures from Dispersed 2D Nanomaterial Inks. Small, 16 (49). p. 2004900. ISSN 1613-6810

Chandrakant, . and Reddy, N.S. and Panigrahi, Bharat B. (2021) Electro spark coating of AlCoCrFeNi high entropy alloy on AISI410 stainless steel. Materials Letters, 304 (130580). ISSN 0167577X

Chandrakant, Chandrakant and Panigrahi, Bharat Bhooshan (2019) Electro-Spark Coating of High Entropy Alloys on AISI 410 Stainless Steel Substrates to Improve the Surface Properties and Wear Resistance. Masters thesis, Indian institute of technology Hyderabad.

Chatterjee, Sourav and Bhattacharjee, Pinaki Prasad and Butterfoss, Glenn L and et al, . (2019) Establishment of atropisomerism in 3-indolyl furanoids: a synthetic, experimental and theoretical perspective. RSC Advances, 9 (39). pp. 22384-22388. ISSN 2046-2069

Chatterjee, Subhradeep and Abinandanan, T A and Reddy, G M and Chattopadhyay, K (2016) Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni. Metallurgical and Materials Transactions A, 47 (2). pp. 769-776. ISSN 1073-5623

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Effects of triethanolamine on the formation of CZTS films using a simple dip coating technique. In: IEEE 43rdPhotovoltaic Specialists Conference (PVSC), 5-10 June 2016.

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2017) Influence of stabilizing agent on dip coating of Cu 2 ZnSnS 4 thin film. Thin Solid Films, 636. pp. 144-149. ISSN 0040-6090

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Investigation of optimum annealing parameters for formation of dip coated Cu2ZnSnS4 thin film. Thin Solid Films, 612. pp. 456-462. ISSN 0040-6090

Chaudhari, S and Palli, S and Kannan, P K and Dey, Suhash Ranjan (2016) Pulsed electrodeposition of Cu2ZnSnS4 absorber layer precursor for photovoltaic application. Thin Solid Films, 600. pp. 169-174. ISSN 0040-6090

Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Dip coating of Cu2ZnSn(SxSe1-x)4 Absorber Layer for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Chaudhari, Sushmita and Kannan, P K and Dey, Suhash Ranjan (2019) Effect of Annealing Atmosphere and Stabilizing Agent on the Formation of CZTS Film Using a Simple Dip Coating Technique. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Chaudhari, Sushmita and Kannan, P.K. and Madhuri, K. and Rey, Suhash R. (2021) Formulation of selenium-rich Cu2ZnSn(SxSe1-x)4 film through non-vacuum dip coating technique. J Mater Sci: Mater Electron.

Chaudhary, Vijay and Pratim Das, Partha and Sahu, Rohit and Dey Sadhu, Susmita and Gupta, Pallav and Gupta, Sumit (2022) Engineered nanomaterials for environmental Sustainability: A Lab-to-Market perspective. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853

Chaudhary, Vijay Prakash and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path During Cold Rolling on the Evolution of Microstructure, Texture And Hardness Properties of Nickel With Extremely Coarse Initial Grain Size. Masters thesis, Indian Institute of Technology Hyderabad.

Chen, L and Chen, J and Lebensohn, R A and Yi, Y Z and Heo, T W and Bhattacharjee, S and Chang, K and Mathaudhu, S and Liu, Z K and Chen, L Q (2015) An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Computer Methods in Applied Mechanics and Engineering, 285. pp. 829-848. ISSN 0045-7825

Chilla, Venkat and Mondal, D.P. and Janaki Ram, G.D. and et al, . (2022) Processing of in-situ aluminium foam-filled stainless steel tube with foam-tube bonding for enhanced crashworthiness. Journal of Manufacturing Processes, 82. pp. 488-500. ISSN 1526-6125

D

D, Davis and M, Srivastava and M, Malathi and Panigrahi, Bharat Bhooshan and Singh, S (2018) Effect of Cr2AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Applied Surface Science. ISSN 0169-4332 (In Press)

DESURU, SREEJAGADEESH and Chatterjee, Subhradeep (2018) Surface Alloying of Titanium with Nickel using Customized Automated GMAW process. Masters thesis, Indian Institute of Technology Hyderabad.

Damodar, Devarakonda and Mahanta, Urbashi and Deshpande, Atul Suresh (2021) N-doped MWCNTs from catalyst-free, direct pyrolysis of commercial glue. Materials Chemistry and Physics, 262. p. 124319. ISSN 0254-0584

Das, Asim and V, Kanchana (2014) Understanding Thermoelectric Properties from Density Functional Theory. Masters thesis, Indian Institute of Technology, Hyderabad.

Das, K C and Ghosh, S P and Tripathy, N and Bose, G and Ashok, A and Pal, Prem and Kim, D H and Lee, T I and Myoung, J M and Kar, J P (2015) Surface and interface studies of RF sputtered HfO2 thin films with working pressure and gas flow ratio. Journal of Materials Science: Materials in Electronics, 26 (8). pp. 6025-6031. ISSN 0957-4522

Das, Partha Pratim (2023) Multi-objective optimization of mechanical properties of chemically treated bio-based composites using response surface methodology. Composites Part C, 10. p. 100337. ISSN 2666-6820

Das, Partha Pratim and Chaudhary, Vijay (2021) Tribological properties of biofiber-based polymer composites. In: Advances in Bio-Based Fiber. Elsevier, pp. 193-211. ISBN 978-012824543-9, 978-012824544-6

Das, Partha Pratim and Chaudhary, Vijay and Ahmad, Furkan and et al, . (2022) Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications. Polymer Composites, 43 (3). pp. 1221-1237. ISSN 0272-8397

Davis, Deepak and Marappan, Gobinath and Sivalingam, Yuvaraj and Panigrahi, Bharat B. and Singh, Sheela (2020) Tribological Behavior of NiMoAl-Based Self-Lubricating Composites. ACS Omega, 5 (24). pp. 14669-14678. ISSN 2470-1343

Davis, Deepak and Shah, A Farhaan and Panigrahi, Bharat Bhooshan and Singh, Sheela (2019) Effect of Cr2AlC nanolamella addition on tribological properties of 5W-30 engine oil. Applied Surface Science. ISSN 01694332

Denmark, Daniel J. and Bustos-Perez, Xiomar and Swain, Anand and Phan, Manh-Huong and Mohapatra, Subhra and Mohapatra, Shyam S. (2019) Readiness of Magnetic Nanobiosensors for Point-of-Care Commercialization. Journal of Electronic Materials, 48 (8). pp. 4749-4761. ISSN 0361-5235

Deshpande, Atul Suresh (2019) జీవ ఇంధనాన్నికి కొత్త ఉత్ప్రేరకం. Eenadu, Hyderabad.

Devarakonda, Damodar and Kumar, S Krishna and Martha, Surendra Kumar and Deshpande, Atul Suresh (2018) Nitrogen-doped Graphene-like Carbon Nanosheets from Commercial Glue: Morphology, Phase Evolution and Li-ion Battery Performance. Dalton Transactions. ISSN 1477-9226

Dey, S R and Hollang, L and Beausir, B and Hieckmann, E (2013) Formation of micro shear bands during cyclic deformation of sub-microcrystalline nickel. Scripta Materialia, 68 (8). pp. 631-634. ISSN 1359-6462

Dey, Suhash Ranjan (2023) Strategies to engineer FeCoNiCuZn high entropy alloy composition through aqueous electrochemical deposition. Electrochimica Acta, 453. p. 142350. ISSN 0013-4686

Dey, Suhash Ranjan and Hollang, L and Beausir, B and Hieckmann, E and Skrotzki, W (2013) Reprint of: Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials, 67. pp. 53-58. ISSN 0167-6636

Dey, Suhash Ranjan and Hollang, L and Beausir, B and et al, . (2013) Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials.

Dey, Suhash Ranjan and Kannan, P K and Chaudhari, Sushmita (2020) Effect of Anionic Substitution of S by Se in CZTSSe Films Prepared from Electron Beam Evaporation. Materials Today: Proceedings, 21 (4). pp. 1787-1792. ISSN 2214-7853

Dey, Suhash Ranjan and Mandati, Sreekanth (2019) Two-dimensional CuIn1−xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Solar Energy, 181. pp. 396-404. ISSN 0038092X

Dey, Suhash Ranjan and Meshram, M P and Basanth Kumar, K (2014) Mechanical properties and microstructural characterization of friction stir welded aIsI 316 austenitic stainless steel. International conference on advances in Manufacturing and Materials engineering.

Dhanabal, Rengasamy and Dey, Suhash Ranjan (2022) Perovskite solar cells: recent progress and strategies developed for minimizing interfacial recombination. Higher Education Press Limited Company.

Dhania, N.K. and Chauhan, V.K. and Abhilash, D. and Thakur, V. and Chaitanya, R.K. and Dutta-Gupta, S. and Dutta-Gupta, A. (2021) Gut-specific arylphorin mediates midgut regenerative response against Cry-induced damage in Achaea janata. Comparative Biochemistry and Physiology Part - B: Biochemistry and Molecular Biology, 255 (110600). ISSN 10964959

Dharmendra, C. and Amirkhiz, B.S. and Lloyd, A. and G D, Janaki Ram and Mohammadi, M. (2020) Wire-arc additive manufactured nickel aluminum bronze with enhanced mechanical properties using heat treatments cycles. Additive Manufacturing, 36 (101510). pp. 1-16. ISSN 2214-8604

Dharmendra, C. and Shakerin, S. and G D, Janaki Ram and Mohammadi, M. (2020) Wire-arc additive manufacturing of nickel aluminum bronze/stainless steel hybrid parts – Interfacial characterization, prospects, and problems. Materialia, 13 (100834). pp. 1-16. ISSN 2589-1529

Dhivya, Egambaram and Magadevan, Deviga and Palguna, Yasam and et al, . (2019) Synthesis of titanium based hetero MOF photocatalyst for reduction of Cr (VI) from wastewater. Journal of Environmental Chemical Engineering, 7 (4). p. 103240. ISSN 22133437

Dinesh, Dinesh and Dey, Suhash Ranjan (2019) Dip Coating of Cu2ZnSnS4 on Flexible Mo foil and its Flexibility measurements. Masters thesis, Indian institute of technology Hyderabad.

Dogra, Ankit Rai and Khandelwal, Mudrika and Kumar, Akshay and Khanra, Partha and Kumar, Pankaj (2020) Study on morphology and conductivity behavior of synthesized polyaniline. In: 3rd International Conference on Condensed Matter and Applied Physics, ICC 2019, 14 October 2019 - 15 October 2019.

Dudala, Srinivas and Korla, Rajesh (2018) Effect of Microstructural Evolution on Flow behavior of Al0.2CoCrFeNi HEA. Masters thesis, Indian Institute of Technology Hyderabad.

Dudala, Srinivas and Krishna S, Chenna and Korla, Rajesh (2021) Microstructural evolution and grain-growth kinetics of Al0.2CoCrFeNi high-entropy alloy. Philosophical Magazine Letters, 101 (11). pp. 444-454. ISSN 0950-0839

Durga Rao, T and Karthik, T and Srinivas, A and Asthana, Saket (2012) Study of structural, magnetic and electrical properties on Ho-substituted BiFeO 3. Solid State Communications, 152 (23). pp. 2071-2077. ISSN 0038-1098

Durga Rao, T and Ramadurai, Ranjit and Asthana, Saket (2014) Enhanced magnetization and improved insulating character in Eu substituted BiFeO3. Journal of Applied Physics, 115 (12). ISSN 0021-8979

Durga Rao, T and Ranjith, R and Asthana, Saket (2014) Prominent improvement in the magnetic and electric properties of EU substituted bifeo3. Journal of Applied Physics.

Dutta-Gupta, Shourya (2023) Tailoring cavity coupled plasmonic substrates for SERS applications. Nanotechnology, 34 (33). p. 335501. ISSN 0957-4484

E

Eichhorn, S. J. and Etale, A. and Khandelwal, Mudrika and et al, . (2022) Current international research into cellulose as a functional nanomaterial for advanced applications. Springer.

Eleti, R R and Bhattacharjee, T and Zhao, L and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Hot Deformation behavior of CoCrFeMnNi FCC High Entropy Alloy. Materials Chemistry and Physics. ISSN 0254-0584 (In Press)

Eleti, R R and Raju, V and Veerasham, M and Reddy, S R and Bhattacharjee, Pinaki Prasad (2018) Influence of strain on the formation of cold-rolling and grain growth textures of an equiatomic HfZrTiTaNb refractory high entropy alloy. Materials Characterization, 136. pp. 286-292. ISSN 1044-5803

Eleti, Rajeshwar Reddy (2015) Hot deformation behavior of CrMnFeCoNi equiatomic FCC High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Equbal, A (2015) Synthesis and Sintering Kinetics of Mechanically Alloyed FeCrCoMnNi High Entropy Alloy Powders. Masters thesis, Indian Institute of Technology Hyderabad.

F

Fan, Zhiyuan and Gupta, Shourya Dutta and Gladstone, Ran and et al, . (2019) Electrically defined topological interface states of graphene surface plasmons based on a gate-tunable quantum Bragg grating. Nanophotonics, 8 (8). pp. 1417-1431. ISSN 2192-8614

G

G D, Sathiaraj and Bhattacharjee, Pinaki Prasad (2015) Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 647. pp. 82-96. ISSN 0925-8388

G S, Bharathi Ganesh (2017) Phase Field Modelling of Eutectoid Transformation in Fe - C Alloy System. Masters thesis, Indian Institute of Technology Hyderabad.

Ganguly, Ronit and Gunasekaran, Vijayabhaskar and Miriyala, Kumaraswamy and Bandyopadhyay, Soumya and Bhattacharya, Saswata and Acharyya, Amit and Ramadurai, Ranjit (2017) Tunable polarization components and electric field induced crystallization in polyvinylidenefluoride (PVDF); a piezo polymer. arXiv.

Ganguly, Ronit and Rajesh, Korla and Acharyya, Amit and Ramadurai, Ranjith (2019) Study of Stiffness and flexible sensing performance of poly-vinylidene fluoride (PVDF) a piezo polymer with varying polarization components. In: 2019 IEEE 14th Nanotechnology Materials and Devices Conference, NMDC 2019, 27 October 2019 - 30 October 2019.

Gatti, J R and Bhattacharjee, P P (2014) Evolution of Microstructure and Texture during Severe Cold Rolling and Annealing Of Al-2.5%Mg and Al-2.5%Mg-0.2%Sc Alloys. In: TMS Light Metals, 16-20, February 2014, San Diego, CA; United States.

Gatti, J R and Bhattacharjee, P P (2014) Microstructure and Texture of Al-2.5wt.%Mg Processed by Combining Accumulative Roll Bonding and Conventional Rolling. Journal of Materials Engineering and Performance. 10p. ISSN 1059-9495

Gatti, J R and Bhattacharjee, Pinaki Prasad (2014) Annealing textures of severely cold and warm-rolled Al-2.5 wt.%Mg alloy. Journal of Alloys and Compounds, 615. pp. 950-961. ISSN 0925-8388

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Effect of Prior Recovery Treatment on the Evolution of Cube Texture During Annealing of Severely Warm-Rolled Al-2.5 wt pctMg Alloy. Metallurgical and Materials Transactions A, 46 (11). pp. 4966-4977. ISSN 1073-5623

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during annealing of Al-2.5%Mg-0.2%Sc severely deformed by a combination of accumulative roll bonding (ARB) and conventional rolling. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Gatti, Jagg Rao (2015) Understanding and Control of Recrystallization Texture in Severely Deformed Al – 2.5wt.%Mg Alloys. PhD thesis, Indian Institute of Technology Hyderabad.

Ghodke, S C (2013) Fabrication and Studies of Organic-Inorganic Hybrid Composites For Piezoelectric Based Vibration Sensors. Masters thesis, Indian Institute of Technology Hyderabad.

Ghosh, Sanyukta and Tippireddy, Sahil and Shankar, Gyan and Karati, Anirudha and Rogl, Gerda and Rogl, Peter and Bauer, Ernst and Malladi, Sai Rama Krishna and Murty, B S and et al, . (2021) InSb nanoparticles dispersion in Yb-filled Co4Sb12 improves the thermoelectric performance. Journal of Alloys and Compounds, 880. pp. 1-10. ISSN 0925-8388

Ghosh, Subhadip and Pradeep, V N S and Muhuri, Sudipto and Pagonabarraga, Ignacio and Chaudhuri, Debasish (2017) Bidirectional motion of filaments: the role of motor proteins and passive cross linkers. Soft Matter, 13 (39). pp. 7129-7140. ISSN 1744-683X

Giri, Jyotsnendu and Deshpande, Atul Suresh and Khandelwal, Mudrika (2023) Biocompatible and antimicrobial multilayer fibrous polymeric wound dressing with optimally embedded silver nanoparticles. Applied Surface Science, 612. p. 155799. ISSN 0169-4332

Godbole, Kirtiratan and Das, C R and Panigrahi, Bharat Bhooshan and et al, . (2020) Grain boundary engineering to overcome temper embrittlement in martensitic steel. Materials Letters. ISSN 0167-577X (In Press)

Gottuparthi, V (2014) Studies on Structural and Physical Properties of Zr Substituted Na0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3-BaTiO3 Solid Solution for Vibration Sensor Application. Masters thesis, Indian Institute of Technology, Hyderabad.

Gulivindala, G. and Ramadurai, Ranjit and Chinthapenta, Viswanath (2022) Indentation based fracture toughness estimation of barium titanate thin film using experiments and simulations. Thin Solid Films, 755. pp. 1-12. ISSN 0040-6090

Gurram, Hanu Phani Ram and Galande, Ashwini S. and John, Renu (2020) Nanometric depth phase imaging using low-cost on-chip lensless inline holographic microscopy. Optical Engineering, 59 (104105). ISSN 0091-3286

Guruvidyathri, K. and Vaidya, Mayur and Murty, B S (2020) Challenges in design and development of high entropy alloys: A thermodynamic and kinetic perspective. Scripta Materialia, 188. pp. 37-43. ISSN 1359-6462

H

Haldar, Arabinda and Murapaka, Chandrasekhar (2023) Skyrmion based majority logic gate by voltage controlled magnetic anisotropy in a nanomagnetic device. Nanotechnology, 34 (22). p. 225202. ISSN 0957-4484

Haldar, Arabinda and Murapaka, Chandrasekhar and Acharyya, Amit (2023) Skyrmion based 3D low complex runtime reconfigurable architecture design methodology of universal logic gate. Nanotechnology, 34 (13). 13LT01. ISSN 0957-4484

Hariharan, V.S. and Pramod, S. and Murty, B S (2022) ICME framework to simulate microstructure evolution during laser powder bed fusion of Haynes 282 nickel-based superalloy. Journal of Materials Science, 57 (21). pp. 9693-9713. ISSN 0022-2461

Hasani, N. and Dharmendra, C. and Sanjari, M. and Fazeli, F. and Amirkhiz, B.S. and Pirgazi, H. and G.D, Janaki Ram and et al, . (2021) Laser powder bed fused Inconel 718 in stress-relieved and solution heat-treated conditions. Materials Characterization, 181. pp. 1-16. ISSN 1044-5803

Hassanpour, A. and Vaidya, M. and Divinski, S.V. and Wilde, G. (2021) Impact of cryogenic cycling on tracer diffusion in plastically deformed Pd40 Ni40 P20 bulk metallic glass. Acta Materialia, 209 (116785). pp. 1-10. ISSN 13596454

Hong, L and Liang, L and Bhattacharyya, Saptashwa et. al. (2016) Anisotropic Li intercalation in a LixFePO4 nano-particle: a spectral smoothed boundary phase-field model. Physical Chemistry Chemical Physics, 18 (14). pp. 9537-9543. ISSN 1463-9076

Hoskoti, Lokanna and Misra, Ajay and M S, Mahesh (2018) Frequency lock-in during vortex induced vibration of a rotating blade. Journal of Fluids and Structures, 80. pp. 145-164. ISSN 0889-9746

I

I, Srikanth and Ch, Subrahmanyam (2014) Effect of Carbon nanotubes/nanofibers Reinforcement on Mechanical and Thermal Properties of CFRPs. PhD thesis, Indian Institute of Technology Hyderabad.

I, Srikanth and Kumar, Suresh and Singh, V and B, Rangababu and Ghosal, P and Ch, Subrahmanyam (2015) Effect of carbon nanofibre addition on the mechanical properties of different Vf carbon-epoxy composites. Bulletin of Materials Science, 38 (2). pp. 309-317. ISSN 0250-4707

I, Srikanth and N, Padmavathi and Kumar, Suresh and Ghosal, P and Kumar, Anil and Ch, Subrahmanyam (2013) Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites. Composites Science and Technology, 80. pp. 1-7. ISSN 0266-3538

IIT, Hyderabad (2021) (Issue 5, Jan 2021) IITH Japan Connect. Other. IITH.

Illa, Mani Pujitha and Adepu, Shivakalyani and Khandelwal, Mudrika (2022) Industrial-scale fabrication and functionalization of nanocellulose. In: Nanocellulose Materials. Elsevier, pp. 21-42. ISBN 9780128239636, 978-012824169-1

Illa, Mani Pujitha and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2018) Bacterial cellulose-derived carbon nanofibers as anode for lithium-ion batteries. Emergent Materials. pp. 1-16. ISSN 2522-5731

Illa, Mani Pujitha and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2019) Modulated Dehydration for Enhanced Anodic Performance of Bacterial Cellulose derived Carbon Nanofibers. ChemistrySelect, 4 (21). pp. 6642-6650. ISSN 2365-6549

Illa, Mani Pujitha and Pathak, Anil D and Sharma, Chandra S. and Khandelwal, Mudrika (2020) Bacterial Cellulose–Polyaniline Composite Derived Hierarchical Nitrogen-Doped Porous Carbon Nanofibers as Anode for High-Rate Lithium-Ion Batteries. ACS Applied Energy Materials, 3 (9). pp. 8676-8687. ISSN 2574-0962

Illa, Mani Pujitha and Peddapapannagari, Kalyani and Raghavan, Siju Cherikkattil and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2021) In situ tunability of bacteria derived hierarchical nanocellulose: current status and opportunities. Springer Science and Business Media B.V.

Ishtiyak, Mohd and Bhattacharjee, P. P. and et al, . (2021) Syntheses, crystal structures, optical, and theoretical study of two ternary chalcogenides CsSc5Te8 and Cs0.6(1)Ti6Se8 with tunnel structures. Solid State Sciences, 114. p. 106577. ISSN 12932558

Ishtiyak, Mohd and Jana, Subhendu and Bhattacharjee, Pinaki Prasad and Jai, Prakash et. al. (2019) Intrinsic extremely low thermal conductivity in BaIn2Te4: Synthesis, crystal structure, Raman spectroscopy, optical, and thermoelectric properties. Journal of Alloys and Compounds. ISSN 09258388

J

J R, Gatti and Bhattacharjee, Pinaki Prasad (2015) Nucleation behavior and formation of recrystallization texture in pre-recovery treated heavily cold and warm-rolled Al–2.5 wt.%Mg alloy. Materials Characterization, 106. pp. 141-151. ISSN 1044-5803

Jadhav, Mahesh and Singh, Sheela and Panigrahi, Bharat Bhooshan and et al, . (2022) Effect of minute element addition on the oxidation resistance of FeCoCrNiAl and FeCoCrNi2Al high entropy alloy. Advanced Powder Technology, 33 (2). pp. 1-13. ISSN 0921-8831

Jagtap, Piyush Vijay (2023) Effect of electric field on mechanical behavior of vertically-aligned carbon nanotube structures. Proceedings of the Indian National Science Academy, 89 (2). pp. 254-266. ISSN 0370-0046

Jagtap, Piyush Vijay (2023) Sn Whisker Growth During Mechanical Loading and Unloading: Highlighting the Critical Role of Stress in Whisker Growth. Journal of Electronic Materials, 52 (2). pp. 773-781. ISSN 0361-5235

Jagtap, Piyush Vijay (2023) Understanding crystallization in undoped and nitrogen doped GeTe thin films using substrate curvature measurements. Materialia, 28. p. 101738. ISSN 2589-1529

Jana, Subhendu and Panigrahi, Gopabandhu and Bhattacharjee, Pinaki Prasad and et al, . (2020) Synthesis, crystal structure, optical absorption study, and electronic structure of Cs3FeCl5. Solid State Sciences, 100 (106064). pp. 1-6. ISSN 1293-2558 (In Press)

Jana, Subhendu and Panigrahi, Gopabandhu and Ishtiyak, Mohd and Narayanswamy, Sake and Bhattacharjee, Pinaki Prasad and Niranjan, Manish K. and Prakash, J. (2022) Germanium Antimony Bonding in Ba4Ge2Sb2Te10 with Low Thermal Conductivity. Inorganic Chemistry, 61 (2). pp. 968-981. ISSN 0020-1669

Jana, Subhendu and Panigrahi, Gopabandhu and Ummethala, Govind and Ghosh, Arghya and Malladi, Sairam K. and Niranjan, Manish K. and Jai, Prakash (2022) Extremely low thermal conductivity in BaSb2Se4: Synthesis, characterization, and DFT studies. Journal of Solid State Chemistry, 315. pp. 1-11. ISSN 0022-4596

Janaki Ram, G.D. (2023) Metallurgical and mechanical properties of hydrogen charged carbide-free bainitic weld metals. International Journal of Hydrogen Energy, 48 (48). pp. 18514-18525. ISSN 0360-3199

Janakiram, S. and Phani, P. Sudharshan and Ummethala, Govind and Jagdeesh, Hima Viswa and Malladi, Sai Rama Krishna and et al, . (2022) Insights on early recovery kinetics in ferrite - pearlite cold rolled high strength sheet steels. Materials Characterization, 193. pp. 1-14. ISSN 1044-5803

Janakiram, S. and Phani, P. Sudharshan and Ummethala, Govind and Malladi, Sai Rama Krishna and et al, . (2021) New insights on recovery and early recrystallization of ferrite-pearlite banded cold rolled high strength steels by high speed nanoindentation mapping. Scripta Materialia, 194. pp. 1-5. ISSN 1359-6462

Jha, M.K. and Das, P.P. and Pandey, V. and Gupta, P. and Chaudhary, V and Gupta, S (2022) Water immersion aging of polymer composites: architectural change of reinforcement, mechanical, and morphological analysis. Biomass Conversion and Biorefinery. ISSN 2190-6815

Jogi, T D (2014) Alumina Copper Composites for Thermoelectric Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Jogi, T and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. Transactions of the Indian Institute of Metals, 69 (2). pp. 507-512. ISSN 0972-2815

Jogi, Tushar and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. In: Transactions of the Indian Institute of Metals, 2016.

Jogi, Tushar and Bhattacharya, Saswata (2021) Interfacial dislocation network in precipitation strengthened alloys during creep: a discrete dislocation dynamics (DDD) study in three dimensions. Modelling and Simulation in Materials Science and Engineering, 29 (3). ISSN 0965-0393

John, Rahul and Dash, Manmath Kumar and Murty, B S and et al, . (2022) Effect of temperature and strain rate on the deformation behaviour and microstructure of Al0.7CoCrFeNi high entropy alloy. Materials Science and Engineering: A, 856. pp. 1-9. ISSN 0921-5093

John, Rahul and Malladi, Sairam K and Murty, B S and et al, . (2022) Microstructural evolution and effect of heat treatment on the precipitation and mechanical behavior of Al0.7CoCrFeNi alloy. Journal of Alloys and Compounds, 904. pp. 1-12. ISSN 0925-8388

Jose, M J and Kumar, S S and Sharma, Abhay (2016) Vibration assisted welding processes and their influence on quality of welds. Science and Technology of Welding and Joining, 21 (4). pp. 243-258. ISSN 1362-1718

Joseph, Anju and Billakanti, Srinivas and Pandit, Manzoor Ahmad and Khatun, Sajmina and Rengan, Aravind Kumar and et al, . (2022) Impact of bandgap tuning on ZnS for degradation of environmental pollutants and disinfection. Environmental Science and Pollution Research. ISSN 0944-1344

Joshi, A M (2014) Sintering Kinetics of Cr2AlC Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Joshi, Mohit and Bhattacharjee, Pinaki Prasad (2012) Effect of Strain Path Change during Cold Rolling On the Evolution of Deformation and Recrystallization Textures of High Purity Nickel. Masters thesis, Indian Institute of Technology Hyderabad.

Jung, Minwoo and Gupta, Shourya Dutta and Dabidian, Nima and Brener, Igal and Shcherbakov, Maxim and Shvets, Gennady (2018) Polarimetry Using Graphene-Integrated Anisotropic Metasurfaces. ACS Photonics, 5 (11). pp. 4283-4288. ISSN 2330-4022

K

K, Basanth Kumar and Dey, Suhash Ranjan (2018) Thermomechanical Processing, Microstructure and Texture Studies of TiHy 600 Alloy (a Near Alpha Titanium Alloy). PhD thesis, Indian institute of technology Hyderabad.

K, Prabahar and Bhat, Anantha P and S, Adiraj and Ramadurai, Ranjith (2020) Grain to Grain Epitaxy-Like Nano Structures of (Ba,Ca)(ZrTi)O3/ CoFe2O4 for Magneto–Electric Based Devices. ACS Applied Nano Materials, 3 (11). pp. 11098-11106. ISSN 2574-0970

K, Rajamallu and Dey, Suhash Ranjan (2018) Design and Development of β Ti Alloys Through First Principles Calculations and Powder Metallurgy Route for Biomedical Applications. PhD thesis, Indian Institute of Technology Hyderabad.

K., Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan and et al, . (2016) Fabrication of Biocompatible Ti-Nb-Sn Through Powder Metallurgy Route for Orthopedic Implants. In: 13th World Conference Titanium, 2015, San Diego, USA.

KARRI, SRI NAGA SESHA and Ramadurai, Ranjit and Bhattacharjee, Pinaki Prasad (2018) Pulsed laser deposition of CoCrFeMnNi High Entropy Alloy and its stability. Masters thesis, Indian Institute of Technology Hyderabad.

Kakunuri, M and Khandelwal, Mudrika and Sharma, Chandra Shekhar and Eichhorn, S J (2017) Fabrication of Bio-inspired Hydrophobic Self-Assembled Electrospun Nanofiber Based Hierarchical Structures. Materials Letters, 196. pp. 339-342. ISSN 0167-577X

Kakunuri, M and Wanasekara, N D and Sharma, Chandra Shekhar and Khandelwal, Mudrika and Eichhorn, S J (2017) Three-dimensional electrospun micropatterned cellulose acetate nanofiber surfaces with tunable wettability. Journal of Applied Polymer Science, 134 (15). p. 44709. ISSN 0021-8995

Kali, Naresh and Korla, Rajesh and Korla, Srikanth (2022) Impact Behaviour of Nano-Hybrid (Carbon/Glass) Fibre Metal Laminates: An Experimental Study. Arabian Journal for Science and Engineering. ISSN 2193-567X

Kali, Naresh and Korla, Rajesh and Korla, Srikanth (2022) Influence of Nanoparticles on Mechanical Properties of Hybrid Polymer-Layered Fibre Metal Laminates (FMLs). Transactions of the Indian Institute of Metals. ISSN 0972-2815

Kalyani, Peddapapannagari and Khandelwal, Mudrika (2021) Modulation of morphology, water uptake/retention, and rheological properties by in-situ modification of bacterial cellulose with the addition of biopolymers. Cellulose, 28 (17). pp. 11025-11036. ISSN 0969-0239

Kamaraj, Ashok and Mandal, Gopi K. and Shanmugam, Sethu P. and et al, . (2022) Quantification and analysis of slag carryover during liquid steel tapping from BOF vessel. Canadian Metallurgical Quarterly, 61 (2). pp. 202-215. ISSN 0008-4433

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G. K. and Roy, G. G. (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B, 53 (4). pp. 1989-2003. ISSN 1073-5615

Kandan, K and Khaderi, Syed Nizamuddin and Wadley, H N G and Deshpande, V S (2017) Surface instabilities in shock loaded granular media. Journal of the Mechanics and Physics of Solids, 109. pp. 217-240. ISSN 0022-5096

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Detailed investigations on influence of precursor stacking and sulfurization for Cu 2 ZnSnS 4 film formation. Thin Solid Films. ISSN 0040-6090 (In Press)

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2019) Impact of sulphurization environment on formation of $$\hbox {Cu}_{2}\hbox {ZnSnS}_{4}$$ Cu 2 ZnSnS 4 films using electron beam evaporated stacked metallic precursors. Bulletin of Materials Science, 42 (1). ISSN 0250-4707

Kannan, P.K. and Chaudhari, Sushmita and Dey, Suhash Ranjan and et al, . (2022) Progress in Development of CZTS for Solar Photovoltaics Applications. In: Encyclopedia of Smart Materials. Elsevier, pp. 681-698. ISBN 978-012815733-6, 978-012815732-9

Kannan, Y S and Karri, Badarinath and Sahu, Kirti Chandra (2018) Letter: Entrapment and interaction of an air bubble with an oscillating cavitation bubble. Physics of Fluids, 30 (4). 041701. ISSN 1070-6631

Kanwal, C and Bhattacharjee, Pinaki Prasad and Mohammad, J (2015) Characterization of Minerals, Metals, and Materials. In: TMS Annual Meeting, January, 2015.

Karati, A. et al. (2021) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. Journal of Materials Engineering and Performance, 31 (1). pp. 305-317. ISSN 10599495

Karati, Anirudha and Ghosh, Sanyukta and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. Journal of Materials Engineering and Performance, 31 (1). pp. 305-317. ISSN 1059-9495

Karati, Anirudha and Ghosh, Sanyukta and Nagini, M. and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18. Journal of Alloys and Compounds, 927. pp. 1-9. ISSN 0925-8388

Karati, Anirudha and Mishra, Soumya Ranjan and Ghosh, Sanyukta and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Ramanujan, R.V. and Yadav, Satyesh Kumar and Murty, B S and et al, . (2022) Thermoelectric properties of a high entropy half-Heusler alloy processed by a fast powder metallurgy route. Journal of Alloys and Compounds, 924. pp. 1-12. ISSN 0925-8388

Karre, R and Niranjan, M K and Dey, Suhash Ranjan (2015) First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications. Materials Science and Engineering: C, 50. pp. 52-58. ISSN 0928-4931

Karre, Rajamallu and Dey, Suhash Ranjan (2021) Progress in Development of Beta Titanium Alloys for Biomedical Applications. In: Encyclopedia of Smart Materials. Elsevier, pp. 512-527.

Karre, Rajamallu and Kodli, Basanth Kumar and Rajendran, Archana and J, Nivedhitha and Pattanayak, Deepak K and Ameyama, Kei and Dey, Suhash Ranjan (2019) Comparative study on Ti-Nb binary alloys fabricated through spark plasma sintering and conventional P/M routes for biomedical application. Materials Science and Engineering: C, 94. pp. 619-627. ISSN 0928-4931

Karre, Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan (2015) Development of β Ti-xNb alloys through firstprinciples DFT analysis and P/M route for orthopedic implants. Transactions of PMAI, 41 (2). pp. 51-54. ISSN 0377-9416

Karthick, G. and Raman, Lavanya and Murty, B S (2021) Phase evolution and mechanical properties of novel nanocrystalline Y2(TiZrHfMoV)2O7 high entropy pyrochlore. Journal of Materials Science & Technology, 82. pp. 214-226. ISSN 1005-0302

Karthik, T and Asthana, Saket (2017) Enhanced mechanical and ferroelectric properties through Grain size refinement in site specific substituted lead free Na0.5-xKxBi0.5TiO3 (x = 0 – 0.10) ceramics. Materials Letters, 190. pp. 273-275. ISSN 0167-577X

Karthik, T and Radhakrishanan, Dhanya and Narayana, Chandrabhas and Asthana, Saket (2018) Nature of electric field driven ferroelectric phase transition in lead-free Na 1/2 Bi 1/2 TiO 3 : In-situ temperature dependent ferroelectric hysteresis and Raman scattering studies. Journal of Alloys and Compounds, 732 (25). pp. 945-951. ISSN 0925-8388

Karthik, T and Ramadurai, Ranjit and Asthana, Saket (2014) Evidence for the suppression of intermediate anti-ferroelectric ordering and observation of hardening mechanism in Na1/2Bi1/2TiO3 ceramics through cobalt substitution. AIP Advances, 4. ISSN 2158-3226

Kashfuddoja, M and M, Ramji (2015) Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation. International Journal of Adhesion and Adhesives, 57. pp. 57-69. ISSN 0143-7496

Kaushik, G. Nischay and Nagini, M. and Reddy, M. Surya Prakash and Hebalkar, Neha Y. and Vijay, R. and Murty, B S (2022) Effect of Zr and ZrO2 on aqueous corrosion behaviour of oxide dispersion strengthened 9Cr ferritic-martensitic steels. Materials Letters, 324. pp. 1-4. ISSN 0167-577X

Kelp, G and Arju, N and Lee, A and Esquivel, E and Delgado, R and Yu, Y and Gupta, S D and Sokolov, K. and Shvets, G. (2019) Application of metasurface-enhanced infra-red spectroscopy to distinguish between normal and cancerous cell types. Analyst, 144 (4). pp. 1115-1127. ISSN 0003-2654

Kelp, Glen and Li, Joy and Lu, Junlan and DiNapoli, Nicholas and Dutta-Gupta, Shourya and et al, . (2020) Infrared spectroscopy of live cells from a flowing solution using electrically-biased plasmonic metasurfaces. Lab on a Chip, 20 (12). pp. 2136-2153. ISSN 1473-0197

Kesavan, P K Pidugu and Chaudhari, Sushmita and Dey, Suhash Ranjan (2016) Effects of Stacking Sequences in the Formation of CZTS Thin Film Using Electron Beam Evaporation. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Khandelwal, M and Windle, A (2014) Origin of chiral interactions in cellulose supra-molecular microfibrils. Carbohydrate Polymers, 106 (1). pp. 128-131. ISSN 0144-8617

Khandelwal, Mudrika and Adepu, Shivakalyani (2020) IIT-H develops oil-based drug delivery system to fight fungal infections. Telengana Today, Hyderabad.

Khandelwal, Mudrika and Adepu, Shivakalyani (2020) IIT-Hyderabad develops drug delivery system to treat fungal infections. The New Indian Express, Hyderabad.

Khandelwal, Mudrika and Aggarwal, Kadam (2016) Contextualising Engineering Education to 21st Century - MBA Style Education for Engineering. In: Journal of Engineering Education Transformations, 2016.

Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) IIT Hyderabad developing waterproof material using industrial waste. Economic Times, Hyderabad.

Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) IIT Hyderabad scientists convert fly ash into waterproofing material. Down to Earth, Hyderabad.

Khandelwal, Mudrika and Sharma, Chandra Shekhar (2021) Nature Inspires: The Story of Lotus Leaf and Gecko’s Foot. Resonance, 26 (9). pp. 1279-1285. ISSN 0971-8044

Khandelwal, Mudrika and Windle, A (2014) Small angle x-ray study of cellulose macromolecules produced by tunicates and bacteria. Inter National Journal of Biological Macromolecules.

Khandelwal, Mudrika and Windle, A H and Hessler, N (2016) In situ tunability of bacteria produced cellulose by additives in the culture media. Journal of Materials Science, 51 (10). pp. 4839-4844. ISSN 0022-2461

Khond, Anuj and Adil, Shaik and Guruvidyathri, K. and Murty, B S and et al, . (2021) Kinetics and phase formation during crystallization of Hf64Cu18Ni18 amorphous alloy. Phase Transitions, 94 (2). pp. 110-121. ISSN 0141-1594

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan (2014) Flow behaviour of IMI 834 titanium alloy under hot deformation using Gleeble 3800. In: 4th Gleeble User Workshop India (GUWI), 2014, Madras, India.

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2015) Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000°C with different strain rates. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Kodli, Basanth Kumar and Karre, Rajamallu and Saxena, Kuldeep K and Pancholi, Vivek and Dey, Suhash Ranjan and Bhattacharjee, Amit (2017) Flow behaviour of TiHy 600 alloy under hot deformation using gleeble 3800. Advances in Materials and Processing Technologies, 3 (4). pp. 490-510. ISSN 2374-068X

Kolanu, Naresh Reddy (2016) Material Characterisation at Elevated Temperatures Involving Digital Image Correlation (DIC). Masters thesis, Indian Institute of Technology Hyderabad.

Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Experimental and numerical studies on the buckling and post-buckling behavior of single blade-stiffened CFRP panels. Composite Structures. ISSN 0263-8223 (In Press)

Korla, Rajesh (2023) Hot tensile deformation and fracture behavior of wire arc additive manufactured Hastelloy C-276. Welding in the World, 67 (4). pp. 1037-1047. ISSN 0043-2288

Korla, Rajesh (2023) The role of molybdenum on evolution of deformation texture in the cold rolled Fe30Mn5Al1C-xMo lightweight austenitic steels. Vacuum, 212. p. 112244. ISSN 0042-207X

Kotnana, G and J, Suryanarayana (2015) Band gap tuning and orbital mediated electron–phonon coupling in HoFe1−xCrxO3 (0 ≤ x ≤ 1). Journal of Applied Physics, 118 (124101). pp. 1-7. ISSN 0021-8979

Koundinya, N T B N and E, Nandha Kumar and Chawake, Niraj and Korla, Rajesh and Kottada, Ravi Sankar (2018) A simple and versatile machine for creep testing at low loads (6–300 N) and on miniaturized specimens: Application to a Mg-base alloy. Review of Scientific Instruments, 89 (10). pp. 1-10. ISSN 0034-6748

Krishna, S. Chenna and Muneshwar, Pravin and Pant, Bhanu and Korla, Rajesh (2022) Hot Deformation Behavior and Processing Map of Cu-Cr-Nb-Zr Alloy. Journal of Materials Engineering and Performance, 31 (2). pp. 1325-1337. ISSN 1059-9495

Kumaar Swamy Reddy, B. and Veeralingam, Sushmitha and Badhulika, Sushmee and et al, . (2022) A flexible, rapid response, hybrid inorganic–organic SnSe2–PEDOT:PSS bulk heterojunction based high-performance broadband photodetector. Materials Chemistry Frontiers, 6 (3). pp. 341-351. ISSN 2052-1537

Kumar, Abhinav and Asthana, Saket (2015) Synthesis and characterization of BaTiO3/CoFe2O4 bulk magneto-electric composite system. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Basant and Dey, Suhash Ranjan and Saxena, Kuldeep K et. al (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science. ISSN 0974-1267

Kumar, H. and Dash, A. and Bhattacharya, Saswata and et al, . (2022) A physics-informed neural network-based numerical inverse method for optimization of diffusion coefficients in NiCoFeCr multi principal element alloy. Scripta Materialia, 214. pp. 1-5. ISSN 1359-6462

Kumar, Harendra and Dey, Suhash Ranjan (2018) Effects of Ball Milling on β(Beta) Titanium Alloys for Biomedical Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, K B and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2017) Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600). Journal of Alloys and Compounds, 691. pp. 906-903. ISSN 0925-8388

Kumar, V. Kiran and Ghosh, Sourav and Naresh, Vangapally and Ummethala, Govind and Malladi, Sairam K and Martha, Surendra Kumar (2022) Binder and conductive diluents free NaVPO4F based free-standing positive electrodes for sodium-ion batteries. Journal of The Electrochemical Society, 169 (1). ISSN 0013-4651

Kumar Behera, Aroop and Murapaka, Chandrasekhar and Mallick, Sougata and et al, . (2021) Skyrmion racetrack memory with an antidot. Journal of Physics D: Applied Physics, 54 (2). ISSN 0022-3727

Kumar Das, Nipu and Mallik, Bhabani Shankar and Banerjee, Tamal and et al, . (2022) Experimental and molecular dynamic insights on the thermophysical properties for MWCNT-Phosphonium based eutectic thermal media. Journal of Molecular Liquids, 354. pp. 1-14. ISSN 0167-7322

Kumar K, Basanth and Karre, Rajamallu and Dey, Suhash Ranjan (2016) Correlation Between Processing Map Domains and Microstructure of 50% Hot Compressed IMI 834 Ti Alloy. In: Proceedings of the 13th World Conference on Titanium, San Diego, USA.

Kumar Makineni, Surendra and Sugathan, Sandeep and Meher, Subhashish and Banerjee, Rajarshi and Bhattacharya, Saswata and Kumar, Subodh and Chattopadhyay, Kamanio (2017) Enhancing elevated temperature strength of copper containing aluminium alloys by forming L12 Al3Zr precipitates and nucleating θ″ precipitates on them. Scientific Reports, 7 (1). ISSN 2045-2322

Kumbhani, Smit and Dharaiya, Vishesh (2022) A Custom Stacking-Based Ensemble Learning Approach to Predict Failure of Stripper Well. In: 2nd International Conference on Communication and Artificial Intelligence, ICCAI 2021, 19 November 2021 through 21 November 2021, Virtual, Online.

Kwak, Min Sub and Peddigari, Mahesh and Min, Yuho and et al, . (2022) Boosting the lifespan of magneto-mechano-electric generator via vertical installation for sustainable powering of Internet of Things sensor. Nano Energy, 101. pp. 1-12. ISSN 2211-2855

L

L. P. Pavithra, Chokkakula and Siri Kiran Janardhana, Reddy Kunda and Madhav Reddy, Kolan and Murapaka, Chandrasekhar and Wang, Xiaodong and Dey, Suhash Ranjan (2021) One-dimensional Co–Cu–Fe–Ni–Zn high-entropy alloy nanostructures. Materials Research Letters, 9 (7). pp. 285-290. ISSN 2166-3831

Lahiri, A and Abinandanan, T A and Gururajan, M P and Bhattacharya, Saswata (2014) Effect of epitaxial strain on phase separation in thin films. Philosophical Magazine Letters, 94 (11). pp. 702-707. ISSN 0950-0839 (In Press)

Lava Kumar, P. and Lombardi, A. and Murty, B S and et al, . (2022) Recent advances in aluminium matrix composites reinforced with graphene-based nanomaterial: A critical review. Progress in Materials Science, 128 (100948). pp. 1-95. ISSN 0079-6425

Lee, Sedong and Narayana, P.L. and Seok, Bang Won and Panigrahi, B.B. and Lim, Su-Gun and Reddy, N.S. (2021) Corrigendum to “Quantitative estimation of corrosion rate in 3C steels under seawater environment” [J Mater Res Technol vol. 11 (March–April 2021) 681–686]. Journal of Materials Research and Technology, 12. p. 1844. ISSN 22387854

Lee, Sedong and Narayana, P.L. and Seok, Bang Won and Panigrahi, B.B. and Lim, Su-Gun and S. Reddy, N. (2021) Quantitative estimation of corrosion rate in 3C steels under seawater environment. Journal of Materials Research and Technology, 11. pp. 681-686. ISSN 22387854

M

M, Usha Rani (2014) Effect of processing conditions on the properties of nanostructured BiFeO3 obtained using different synthetic strategies. Masters thesis, Indian Institute of Technology Hyderabad.

M M, Saj Mohan and Bandyopadhyay, Soumya and Jogi, Tushar and Bhattacharya, Saswata and Ramadurai, Ranjit (2019) Realization of rhombohedral, mixed, and tetragonal like phases of BiFeO3 and ferroelectric domain engineering using a strain tuning layer on LaAlO3(001) substrate. Journal of Applied Physics, 125 (1). ISSN 0021-8979

M V, Sreenath and Ramadurai, Ranjit (2018) Tip Induced Surface Defect migration and Conductivity Studies in Rhombohedral epitaxial BiFeO3 Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.

M., Jagathpriya L. and Dutta-Gupta, S. (2022) Simulation and fabrication of multi-layer plasmonic substrates for potential SERS application. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

M., Saj Mohan M and Ramadurai, Ranjit (2019) Influence of Strain and Anisotropy on Structure of BiFeO3 Epilayers and their Utilization as Interface Driven Heterostructures for Multiferroic Device Applications. PhD thesis, Indian institute of technology Hyderabad.

M., Saj Mohan M and Ramadurai, Ranjit (2018) Template assisted strain tuning and phase stabilization in epitaxial BiFeO3 thin films. In: AIP Conference Proceedings 1942.

Madhav Kumar, V and Srinivas, A and Talapatra, A and Asthana, Saket and Mohanty, J and Kamat, S V (2017) Effect of deposition temperature on structural, microstructural and magnetic properties of CoFe2O4 thin films deposited by pulsed laser deposition. Journal of Materials Science: Materials in Electronics, 28 (1). pp. 446-453. ISSN 0957-4522

Madhuri, K and Kannan, P K and Dey, Suhash Ranjan and et al, . (2020) Effect of Annealing Time and Heat Flux on Solvothermal Synthesis of CIGS Nanoparticles. Materials Today: Proceedings, 21 (4). pp. 1882-1887. ISSN 2214-7853

Madhuri, K. and Kannan, P. K. and Yadav, Brijesh Singh and Chaudhari, Sushmita and Dhage, Sanjay R. and Dey, Suhash Ranjan (2021) Investigation on effects of precursor pre-heat treatments on CIGS formation using spin-coated CIG precursor. Journal of Materials Science: Materials in Electronics, 32 (2). pp. 1521-1527. ISSN 0957-4522

Mahanta, U. and Khandelwal, M. and Deshpande, A. (2021) Antimicrobial surfaces: a review of synthetic approaches, applicability and outlook. Journal of the Iranian Statistical Society, 56 (32). pp. 17915-17941. ISSN 00222461

Mahanta, Urbashi and Khandelwal, Mudrika and Deshpande, Atul Suresh (2022) TiO2@SiO2 nanoparticles for methylene blue removal and photocatalytic degradation under natural sunlight and low-power UV light. Applied Surface Science, 576. pp. 1-11. ISSN 0169-4332

Mahanta, Urbashi and Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) Wetting Transition from Lotus Leaf to Rose Petal using Modified Fly Ash. ChemistrySelect, 4 (27). pp. 7936-7942. ISSN 2365-6549

Maharana, H S and Akarapu, A and Pal, S and Basu, A (2016) Surface-Mechanical Properties of Electrodeposited Cu-Al2O3 Composite Coating and Effects of Processing Parameters. Metallurgical and Materials Transactions A, 47 (1). pp. 388-399. ISSN 1073-5623

Mahata, Bidesh and Ramadurai, Ranjit (2019) Structural and dielectric studies of ferroelectric Nd2Ti2O7 for high temperature pyro sensor application. Masters thesis, Indian institute of technology Hyderabad.

Maity, Palash Chandra (2016) Polyaniline: Synthesis and Natural Nanocomposites. Masters thesis, Indian Institute of Technology Hyderabad.

Maity, Palash Chandra and Khandelwal, Mudrika (2016) Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. American Journal of Materials Synthesis and Processing, 1 (4). pp. 37-42. ISSN 2575-1530

Majhi, S. and Peddiraju, V.C. and Mishra, A. (2021) Effect of antimicrobial peptide (AMP)–tethered stainless steel surfaces on the bacterial membrane. Materials Today Chemistry, 21 (100541). ISSN 2468-5194

Malladi, Sairam K and Gupta, Shourya Dutta and Subrahmanyam, Challapalli (2023) CuInS2 Nanosheet Arrays with a MoS2 Heterojunction as a Photocathode for PEC Water Splitting. Energy & Fuels, 37 (3). pp. 2340-2349. ISSN 0887-0624

Malladi, Sairam K and Niranjan, Manish K and Jai, Prakash and et al, . (2022) Metal to insulator transition in Ba2Ge2Te5: Synthesis, crystal structure, resistivity, thermal conductivity, and electronic structure. Materials Research Bulletin, 147. pp. 1-10. ISSN 0025-5408

Malladi, Sairam K and Niranjan, Manish K and Prakash, J. and et al, . (2022) Chalcogen dependent metal vacancies and disorder in Ba2Ln1−Mn2−S5 and Ba2−Ln1−Mn2−Se5 (Ln = Pr, Nd, and Gd) structures. Journal of Alloys and Compounds, 901. pp. 1-12. ISSN 0925-8388

Malladi, Sairam K and Niranjan, Manish K and Prakash, J. and et al, . (2022) Synthesis, characterization, and electronic structure of SrBi2S4. Journal of Solid State Chemistry, 312. pp. 1-11. ISSN 0022-4596

Malladi, Sairam K and Niranjan, Manish K and Prakash, J. and et al, . (2022) A new non-stoichiometric quaternary sulfide Ba3.14(4)Sn0.61(1)Bi2.39(1)S8: Synthesis, crystal structure, physical properties, and electronic structure. Journal of Solid State Chemistry, 308. pp. 1-10. ISSN 0022-4596

Malladi, Sairam K and Shashidhar, Thatikonda and Subrahmanyam, Challapalli and et al, . (2022) Oxidation of Toluene by Ozone over Surface-Modified γ-Al2O3: Effect of Ag Addition. Catalysts, 12 (4). pp. 1-12. ISSN 2073-4344

Mallesham, B and Ramadurai, Ranjit and Manivelraja, M (2014) Scandium induced structural transformation and B':B' cationic ordering in Pb(Fe0.5Nb0.5)O3 multiferroic ceramics. Journal of Applied Physics, 116 (3). ISSN 0021-8979

Mallesham, Bandi and Ramadurai, Ranjit (2016) Investigations on Dielectric phase transition behavior of Pb(Fe0.5-xScx)Nb0.5O3 Multiferroic Ceramics. MRS Advances, 1 (9). pp. 585-590. ISSN 2059-8521

Mandati, S (2015) Fabrication of CuInSe2 and Cu(In,Ga)Se2 Absorber Layers by Pulse- and Pulse-reverse Electrochemical Techniques for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2014) CuIn1-xGaxSe2 thin-film absorber layers for solar photovoltaics fabricated by two-stage pulsed current electrodeposition. Materials Letters, 118 (1). pp. 158-160. ISSN 0167-577X

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Enhanced photoresponse of Cu(In,Ga)Se2 /CdS heterojunction fabricated using economical non-vacuum methods. Electronic Materials Letters, 11 (4). pp. 618-624. ISSN 2093-6788

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Improved Photoelectrochemical Performance Of Cu(In,Ga)Se2 Thin Films Prepared By Pulsed Electrodeposition. Journal of Renewable and Sustainable Energy, 5. 031602. ISSN 1941-7012

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition. Journal of Power Sources, 273. pp. 149-157. ISSN 0378-7753

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Pulsed electrodeposition of Cuinse2 thin films with morphology for solar cell applications. Journal of The Electrochemical Society, 160 (4). D173-D177. ISSN 0013-4651

Mandati, S and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, V S (2019) Two-dimensional CuIn1− xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Journal of Magnetism and Magnetic Materials, 181. pp. 396-404. ISSN 0304-8853

Mandati, S and Sarada, B V and Dey, Suhash Ranjan and et al, . (2013) Pulse Electrodeposition and Characterization of CIGS thin-films for Solar Cells Applications. In: Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry , ELAC-2013, January, 2013, Hyderabad, India.

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, Sarada V (2018) Cu(In,Ga)Se2 Films with Branched Nanorod Architectures Fabricated by Economic and Environmentally Friendly Pulse-Reverse Electrodeposition Route. ACS Sustainable Chemistry & Engineering, 6 (11). pp. 13787-13796. ISSN 2168-0485

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V. and et al, . (2019) Two-dimensional CuIn1−xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Solar Energy, 181. pp. 396-404. ISSN 0038092X

Mandi, Soumen (2016) Studies on attaining 0.5(Ba0.7Ca0.3TiO3) -0.5(BaZr0.2Ti0.8O3) morphotrophic composition through multilayer approach. Masters thesis, Indian Institute of Technology Hyderabad.

Mane, R B (2014) Effect of Additives on Sintering Of Ti3SiC2 Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Mane, R.B. and Panigrahi, B.B. and et al, . (2021) Doping-induced coloration in titania. Journal of the American Ceramic Society, 104 (7). pp. 2932-2936. ISSN 00027820

Mane, Rahul B and Haribabu, Ampolu and Panigrahi, Bharat Bhooshan (2018) Synthesis and sintering of Ti3GeC2 MAX phase powders. Ceramics International, 44 (1). pp. 890-893. ISSN 02728842

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Comparative study on sintering kinetics of as-milled and annealed CoCrFeNi high entropy alloy powders. Materials Chemistry and Physics, 210. pp. 49-56. ISSN 0254-0584

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Effect of alloying order on non-isothermal sintering kinetics of mechanically alloyed high entropy alloy powders. Materials Letters, 217. pp. 131-134. ISSN 0167-577X

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2017) GRAIN BOUNDARY SLIDING ASSISTED DENSIFICATION DURING INITIAL SINTERING STAGE OF MECHANICALLY ALLOYED CoFeNi POWDERS. TRANSACTIONS OF POWDER METALLURGY ASSOCIATION OF INDIA, 43 (1). pp. 13-19.

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2019) Sintering Mechanisms of Mechanically Alloyed High Entropy Alloy Powders. PhD thesis, Indian institute of technology Hyderabad.

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Sintering mechanisms of mechanically alloyed CoCrFeNi high-entropy alloy powders. Journal of Materials Research. pp. 1-9. ISSN 0884-2914 (In Press)

Mane, Rahul B and Y, Rajkumar and Panigrahi, Bharat Bhooshan (2018) Sintering mechanism of CoCrFeMnNi high-entropy alloy powders. Powder Metallurgy, 61 (2). pp. 131-138. ISSN 0032-5899

Mane, Rahul B. and Ampolu, Haribabu and Panigrahi, Bharat Bhooshan and et al, . (2019) Oxidation kinetics of Ti3GeC2 MAX phase. Corrosion Science, 151. pp. 81-86. ISSN 0010938X

Mane, Rahul B. and Sahoo, Ramkrishna and Reddy, Bapathi Kumaar Swamy and Ravula, Vijay and Panigrahi, Bharat B. and Borse, Pramod H. and Chakravarty, Dibyendu (2021) Doping‐induced coloration in titania. Journal of the American Ceramic Society, 104 (7). pp. 2932-2936. ISSN 0002-7820

Mane, Rahul B. and Vijay, R. and Panigrahi, Bharat B. and Chakravarty, D. (2021) High temperature decomposition kinetics of Ti3GeC2 MAX phase. Materials Letters, 282. p. 128853. ISSN 0167577X

Manish, P M and Basanth Kumar, K and Dey, Suhash Ranjan (2014) Friction Stir Welding of Austenitic Stainless Steel by PCBN Tool and its Joint Analyses. International Conference on Materials Manufacturing ICMPC.

Manivannan, A and S K, Myana and Miriyala, K and Sahu, S and Ramadurai, R (2014) Low power ovonic threshold switching characteristics of thin GeTe6 films using conductive atomic force microscopy. Applied Physics Letters, 105 (243501). pp. 1-5. ISSN 0003-6951

Mannepalli, Venkateswara Rao and M M, Saj Mohan and Ramadurai, Ranjit (2017) Tailoring the Band gap and magnetic properties by Bismuth substitution in Neodymium Chromite. Bulletin of Materials Science. pp. 1-24. ISSN 0250-4707 (In Press)

Mannepalli, Venkateswara Rao and Mohan, M M Saj and Ranjith, R (2017) Tailoring the bandgap and magnetic properties by bismuth substitution in neodymium chromite. Bulletin of Materials Science, 40 (7). pp. 1503-1511. ISSN 0250-4707

Mannepalli, Venkateswara Rao and Raghunathan, R and Ramadurai, Ranjit (2017) Local structural distortion and interrelated phonon mode studies in yttrium chromite. Journal of Materials Research, 32 (8). pp. 1541-1547. ISSN 0884-2914

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2017) AC - conductivity studies on Y1-xBixCrO3 solid solution. AIP Conference Proceedings, 1832. p. 110017. ISSN 0094-243X

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2017) Structural and electrical transport studies in Bi-substituted Yttrium Chromite. Journal of Materials Science: Materials in Electronics, 28 (11). pp. 8087-8092. ISSN 0957-4522

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2017) Structural, Electrical, Optical and Magnetic properties of Y1-xBixCrO3and Nd1-xBixCrO3 (x=0 to 0.15) Ceramics. PhD thesis, Indian Institute of Technology Hyderabad.

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2016) Studies on Local Structural Inhomogeneity and Origin of Ferroelectricity in Yttrium chromite Ceramics. MRS Advances, 1 (9). pp. 609-614. ISSN 2059-8521

Manoj, Talluri and Kotha, Srinu and Paikaray, Bibekananda and Srideep, Dasari and Haldar, Arabinda and Kotagiri, Venkata Rao and Murapaka, Chandrasekhar (2021) Giant spin pumping at the ferromagnet (permalloy) – organic semiconductor (perylene diimide) interface. RSC Advances, 11 (56). pp. 35567-35574. ISSN 2046-2069

Manoj, Talluri and Perumal, Hari Prasanth and Paikaray, Bibekananda and Haldar, Arabinda and Sinha, Jaivardhan and Bhattacharjee, Pinaki Prasad and Murapaka, Chandrasekhar (2023) Perpendicular magnetic anisotropy in a sputter deposited nanocrystalline high entropy alloy thin film. Journal of Alloys and Compounds, 930. pp. 1-7. ISSN 0925-8388

Mantripragada, R. and Korla, R. and et al, . (2021) Effect of solutionizing temperature on the microstructural evolution during double aging of powder bed fusion-additive manufactured IN718 alloy. Materials Characterization, 172 (110868). ISSN 10445803

Mastanaiah, P and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Process parameters-weld bead geometry interactions and their influence on mechanical properties: A case of dissimilar aluminium alloy electron beam welds. Defence Technology, 14 (2). pp. 137-150. ISSN 2214-9147

Mastanaiah, P. and Reddy, G. Madhusudan and Bhattacharya, Anirban and et al, . (2022) Unveiling Liquation and Segregation Induced Failure Mechanism in Thick Dissimilar Aluminum Alloy Electron-Beam Welds. Metals, 12 (3). pp. 1-17. ISSN 2075-4701

Maurya, A K (2015) Synthesis and Mechanical Studies of Mg-Hydroxyapatite Composite for Bio materials Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Meghwal, Ashok and Anupam, Ameey and Luzin, Vladimir and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2021) Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings. Journal of Alloys and Compounds, 854. pp. 1-20. ISSN 0925-8388

Meghwal, Ashok and Anupam, Ameey and Murty, B S and et al, . (2020) Thermal Spray High-Entropy Alloy Coatings: A Review. Journal of Thermal Spray Technology, 29 (5). pp. 1-37. ISSN 1059-9630

Meghwal, Ashok and Anupam, Ameey and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2022) Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating. Wear, 506-50. pp. 1-15. ISSN 0043-1648

Mehta, Jimmy and Das, Partha Pratim and Mehta, Sahil and et al, . (2022) Effect of nanofillers and nanotoxicity on the performance of composites: Influencing factors, future scope, challenges and applications. John Wiley and Sons Inc.

Meshram, M P (2014) Friction Stir Welding of Austenitic Stainless Steel (AISI- 316) To Ti-6Al-4V and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

Meshram, Manish P and Tamboli, Rameez Rajmahammad and Kodli, Basanth Kumar and Yebaji, Sushil Gyanoba and Dey, Suhash Ranjan (2018) Texture analyses of friction stir welded austenitic stainless steel AISI-316L. Advances in Materials and Processing Technologies, 4 (2). pp. 244-254. ISSN 2374-068X

Miriyala, K and Ramadurai, Ranjit (2016) Tunable ferroelectric domain orientation in polycrystalline and highly oriented Na0.5Bi0.5TiO3 Thin Films. Materials Letters, 178. pp. 23-26. ISSN 0167-577X

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2018) Microstructural influence on ferroelectric domain pattern and piezoelectric properties of Na 0.5 Bi 0.5 TiO 3 thin films. Ceramics International, 44 (12). pp. 14556-14562. ISSN 0272-8842

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2016) Microstructural influence on piezoresponse and leakage current behavior of Na0.5Bi0.5TiO3 Thin Films. MRS Advances, 1 (37). pp. 2597-2602. ISSN 2059-8521

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2019) Texture and Microstructural Influence on Piezoelectric Properties of Na0.5Bi0.5TiO3 Thin Films: A Lead Free Piezoelectric Material. PhD thesis, Indian institute of technology Hyderabad.

Mohanty, Uttam Kumar and Sharma, Abhay and Abe, Yohei and et al, . (2022) Parametric study on AC square waveform welding. Materials Today: Proceedings, 56. pp. 2980-2987. ISSN 2214-7853

Mukherjee, Eshita and Pillanagrovi, Jayakumar and Bhatnagar, Dhruv and Dutta-Gupta, S. (2022) Real time monitoring of assembly of plasmonic nanoparticles on polyelectrolyte coated surfaces. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Murthy, S.S.N. and Patel, Manish and Reddy, T. Sreekantha and Prasad, V.V. Bhanu and Panigrahi, Bharat B. (2021) Processing and characterization of carbon fibres reinforced ZrB2 ultra high temperature ceramic matrix composite. Ceramics International. ISSN 02728842

Murty, B S (2023) Designing a thermodynamically stable and intrinsically ductile refractory alloy. Journal of Alloys and Compounds, 939. p. 168597. ISSN 0925-8388

Myana, S K (2013) Electrical Transport Properties of Amorphous Ge15Te85 Thin Films Using Scanning Probe Microscopy for Phase Change Memory Applications. Masters thesis, Indian Institute of Technology Hyderabad.

N

N, Ramu and K, Meera and Ramadurai, Ranjit and Rajaram, Muralidharan (2018) The Role of B-site Substitution on the Structural and Dielectric Properties of Samarium Orthoferrite Polycrystals. Materials Research Express. ISSN 2053-1591

Naganaboina, Venkata Ramesh and Bonam, Satish and Anandkumar, Mariappan and Deshpande, Atul Suresh and Singh, Shiv Govind (2022) Humidity-Independent Methane Gas Detection in Gd0.2La0.2Ce0.2Hf0.2Zr0.2O2-based Sensor Using Polynomial Regression Analysis. IEEE Electron Device Letters. pp. 1-4. ISSN 0741-3106

Naganaboina, Venkata Ramesh and Deshpande, Atul Suresh and Singh, Shiv Govind and et al, . (2022) Single-Phase High-Entropy Oxide Nanoparticles for Wide Dynamic Range Detection of CO2. ACS Applied Nano Materials, 5 (3). pp. 4524-4536. ISSN 2574-0970

Naganaboina, Venkata Ramesh and Deshpande, Atul Suresh and Singh, Shiv Govind and et al, . (2022) Single-phase high-entropy oxide-based chemiresistor: Toward selective and sensitive detection of methane gas for real-time applications. Sensors and Actuators, B: Chemical, 357. pp. 1-10. ISSN 0925-4005

Nagini, M. and Pradeep, K.G. and Vijay, R. and Reddy, A.V. and Murty, B S and et al, . (2020) A combined electron microscopy, atom probe tomography and small angle X-ray scattering study of oxide dispersion strengthened 18Cr ferritic steel. Materials Characterization, 164. pp. 1-9. ISSN 1044-5803

Naidu, Palleda Thaviti and Korla, Rajesh (2019) Effect of Temperature and Strain rate on Flow behavior of Al0.3CoCrFeNi HEA. Masters thesis, Indian institute of technology Hyderabad.

Najathulla, Bhagavathi Chalil and Deshpande, Atul Suresh and Khandelwal, Mudrika (2022) PEDOT:PSS/Bacterial Cellulose-based soft actuator under triangle and square wave: Deflection, response and fidelity. Synthetic Metals, 286. pp. 1-7. ISSN 0379-6779

Najathulla, Bhagavathi Chalil and Deshpande, Atul Suresh and Khandelwal, Mudrika (2022) Smartphone camera-based micron-scale displacement measurement: development and application in soft actuators. Instrumentation Science & Technology. pp. 1-10. ISSN 1073-9149

Nandeshwar, Ruchira and Illa, Mani Pujitha and Khandelwal, Mudrika and et al, . (2022) Enzymatic degradation of bacterial cellulose derived carbon nanofibers (BC-CNF) by myeloperoxidase (MPO): Performance evaluation for biosensing. Biosensors and Bioelectronics: X, 12. pp. 1-10. ISSN 2590-1370

Narayanswamy, S. and Saha, R. and Bhattacharjee, P.P. (2021) Cross-rolling mediated microstructure and texture evolution in severely cold-rolled and annealed ultrafine pearlite. Materials Characterization, 171 (110751). ISSN 10445803

Narayanswamy, S. and Saha, R. and Bhattacharjee, Pinaki Prasad (2020) Strain dependent evolution of microstructure and texture in severely cold-rolled and annealed ultrafine pearlite. Materials Characterization, 169 (110583). ISSN 10445803

Nasani, Narendar and Shakel, Zinaida and Loureiro, Francisco J.A. and Panigrahi, Bharat Bhooshan and Kale, Bharat B. and Fagg, Duncan P. (2021) Exploring the impact of sintering additives on the densification and conductivity of BaCe0.3Zr0.55Y0.15O3-δ electrolyte for protonic ceramic fuel cells. Journal of Alloys and Compounds, 862. p. 158640. ISSN 0925-8388

Naveena, D. and Dhanabal, R. and Chandra Bose, A. (2022) Investigating the effect of La doped CuO thin film as absorber material for solar cell application. Optical Materials, 127. pp. 1-9. ISSN 0925-3467

Ndione, Paul F and Ratcliff, Erin L and Dey, Suhash Ranjan et. al. (2019) High-Throughput Experimental Study of Wurtzite Mn1–xZnxO Alloys for Water Splitting Applications. ACS Omega, 4 (4). pp. 7436-7447. ISSN 2470-1343

Niranjan, Manish K (2016) Infrared reflectivity and Raman intensity spectrum of relaxor ferroelectric Na1/2 Bi1/2TiO3 at room temperature: a first-principles theoretical study. Materials Research Express, 3 (12). p. 125501. ISSN 2053-1591

Nowduru, R. and Bodapati, B.R. and Malladi, Sairam K (2022) Carbon soot nanoparticles derived from wasted rubber: An additive in lubricating oil for efficient friction and wear reduction. Diamond and Related Materials, 126. pp. 1-10. ISSN 0925-9635

P

P, Mastanaiah and Sharma, Abhay and Reddy, G M (2016) Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties. Transactions of the Indian Institute of Metals, 69 (7). pp. 1397-1415. ISSN 0972-2815

P Lavanya, Devi and Gupta, Shourya Dutta (2019) Tunable plasmonic devices for active control of molecular coupling and optical trapping. Masters thesis, Indian institute of technology Hyderabad.

P V, Anju and Khandelwal, Mudrika (2019) In situ Derived Composites of Recycled Polystyrene and Bacterial cellulose. Masters thesis, Indian institute of technology Hyderabad.

Pachalla, S K S and S, Suriya Prakash (2017) Efficient near surface mounting CFRP strengthening of pretensioned hollowcore slabs with opening - An experimental study. Composite Structures, 162. pp. 28-38. ISSN 0263-8223

Paikaray, B. and Haldar, Arabinda and Murapaka, Chandrasekhar and et al, . (2022) Large Spin Pumping and Inverse Spin Hall Effect in Ta/Py Bilayer Structures. Physica Status Solidi (a), 219 (11). ISSN 1862-6300

Paikaray, B. and Murapaka, C. and et al, . (2021) Tunable microwave properties of a skyrmion in an isolated nanodisk. Journal of Magnetism and Magnetic Materials, 529 (167900). ISSN 03048853 (Submitted)

Paikaray, Bibekananda and Kuchibhotla, Mahathi and Haldar, Arabinda and Murapaka, Chandrasekhar (2022) Reconfigurable Logic Operations via Gate Controlled Skyrmion Motion in a Nanomagnetic Device. ACS Applied Electronic Materials, 4 (5). pp. 2290-2297. ISSN 2637-6113

Paikaray, Bibekananda and Kuchibhotla, Mahathi and Murapaka, Chandrasekhar and Haldar, Arabinda (2022) Skyrmion Dynamics in Concentric and Eccentric Nano-Ring Structures. IEEE Transactions on Magnetics, 58 (2). pp. 1-6. ISSN 0018-9464

Palai, Debabrata and Khandelwal, Mudrika (2019) Bacterial cellulose membranes for ultrafiltration. Masters thesis, Indian institute of technology Hyderabad.

Palguna, Y. and Rajesh Kannan, A. and Korla, Rajesh (2022) Microstructure and mechanical properties of wrought Al0.2CoCrFeNiMo0.5 high entropy alloy using gas tungsten arc welding process. Materials Letters, 317 (132109). pp. 1-4. ISSN 0167-577X

Palguna, Yasam and Kotla, Sairam and Korla, Rajesh (2023) High temperature deformation behavior of Al0.2CoCrFeNiMo0.5 high entropy alloy: Dynamic strain ageing. Journal of Alloys and Compounds, 930. pp. 1-9. ISSN 0925-8388

Palli, S and Dey, Suhash Ranjan (2016) Theoretical and Experimental Study of Copper Electrodeposition in a Modified Hull Cell. International Journal of Electrochemistry, 2016 (348240). pp. 1-13. ISSN 2090-3529

Palli, S and Hamann, S and Wambach, M and Ludwig, A and Dey, Suhash Ranjan (2015) Fabrication of a Ni-Cu Thin Film Material Library Using Pulsed Electrodeposition. Journal of The Electrochemical Society, 161 (10). D504-D509. ISSN 0013-4651

Palli, Srinivas (2016) Theoretical and Experimental Studies of Single Metals (Cu and Ni) and Binary Ni-Cu alloy Electrodeposition in a Modified Hull cell: A Combinatorial Approach. PhD thesis, Indian Institute of Technology Hyderabad.

Palli, Srinivas and Dey, Suhash Ranjan (2017) Numerical simulation and experimental investigation of combinatorial electrodeposition of Ni-Cu material library using modified Hull cell. Physica Status Solidi (a), 214 (10). p. 1700084. ISSN 1862-6300

Palli, Srinivas and Dey, Suhash Ranjan (2017) Thermal stability of pulse electroplated gold films: SEM-EBSD studies. Advanced Material Science, 2 (1). ISSN 23986883

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Additive Manufacturing of Complex Shapes Through Weld-Deposition and Feature Based Slicing. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Nov 13-19, 2015, Houston, TX.

Panda, J. P. and Arya, P. and Guruvidyathri, K. and Ravikirana, . and Murty, B S (2021) Studies on Kinetics of BCC to FCC Phase Transformation in AlCoCrFeNi Equiatomic High Entropy Alloy. Metallurgical and Materials Transactions A, 52 (5). pp. 1679-1688. ISSN 1073-5623

Pandey, Ullas and Rani, Malothu Usha and Deshpande, Atul Suresh and Singh, Shiv Govind and et al, . (2021) Sweetcorn husk derived porous carbon with inherent silica for ultrasensitive detection of ovarian cancer in blood plasma. Electrochimica Acta, 397. pp. 1-11. ISSN 0013-4686

Panigrahi, Bharat Bhooshan and Mane, R and Joshi, A and et al, . (2014) Densification of some MAX phases powders using sintering aids. In: World Congress on Powder Metallurgy and Particular Materials, 18-22 May 2014, Orlando, USA.

Panigrahi, Bharat Bhooshan and Srivastava, Meenu and Malathi, M. and et al, . (2018) Effect of Cr 2 AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Applied Surface Science, 449. pp. 295-303. ISSN 01694332

Panigrahi, G. and Bhattacharjee, P. P. and Niranjan, M. K. and Prakash, J. and et al, . (2021) Ba2Ln1−xMn2Te5 (Ln = Pr, Gd, and Yb; x = Ln vacancy): syntheses, crystal structures, optical, resistivity, and electronic structure. Dalton Transactions, 50 (19). pp. 6688-6701. ISSN 1477-9226

Panigrahi, Gopabandhu and Jana, Subhendu and Narayanswamy, S. and Bhattacharjee, Pinaki Prasad and Niranjan, Manish K. and Jai, Prakash (2021) Reactive molten-flux assisted syntheses of single crystals of Cs19Ln19Mn10Te48 (Ln = Pr and Gd) crystallizing in a new structure type. CrystEngComm, 23 (47). pp. 8418-8429. ISSN 1466-8033

Pankaj, P and Bhattacharyya, S and Chatterjee, Subhradeep (2022) Surface-directed and bulk spinodal decomposition compete to decide the morphology of bimetallic nanoparticles. Modelling and Simulation in Materials Science and Engineering, 31 (015003). pp. 1-10. ISSN 0965-0393

Pankaj, P. and Bhattacharya, Saswata and Chatterjee, Subhradeep (2022) Competition of core-shell and Janus morphology in bimetallic nanoparticles: Insights from a phase-field model. Acta Materialia, 233. pp. 1-19. ISSN 1359-6454

Pankaj, Pankaj and Dey, Suhash Ranjan (2012) Friction Stir Welding (FSW) Studies of Dissimilar Al-Based Alloys Using Different Pin Profiles. Masters thesis, Indian Institute of Technology Hyderabad.

Pantula, P D and Miriyala, S S and Mitra, Kishalay (2016) KERNEL: Enabler to Build Smart Surrogates for Online Optimization and Knowledge Discovery. Materials and Manufacturing Processes. ISSN 1042-6914 (In Press)

Pappu, S. and Anandan, S. and Martha, Surendra Kumar and et al, . (2022) High-performance hybrid supercapacitor with electrochemically exfoliated graphene oxide incorporated NiCo2O4 in aqueous and non-aqueous electrolytes. Journal of Energy Storage, 50. pp. 1-11. ISSN 2352-152X

Pappu, Samhita and Rao, Tata N. and Martha, Surendra Kumar and et al, . (2022) Electrodeposited Manganese Oxide based Redox Mediator Driven 2.2 V High Energy Density Aqueous Supercapacitor. Energy, 243. ISSN 0360-5442

Parakh, A. and Murty, B S and et al, . (2021) Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy. Journal of Alloys and Compounds, 863 (15805). ISSN 0925-8388

Parchuri, Pradeep Kumar (2016) A Study of Melt Ratio and Microstructure in Dissimilar Fusion Welds. Masters thesis, Indian Institute of Technology Hyderabad.

Parida, Tripta and Karati, Anirudha and Murty, B S and et al, . (2022) Low temperature synthesis of multicomponent perovskite by mechanochemical route. Ceramics International, 48 (5). pp. 6385-6392. ISSN 0272-8842

Patel, A and Wani, I and Reddy, S R and Narayanaswamy, S and Lozinko, A and Saha, R and Guo, S and Bhattacharjee, Pinaki Prasad (2018) Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi 2.1 eutectic high entropy alloy. Intermetallics, 97. pp. 12-21. ISSN 0966-9795

Patel, Amit and Bhattacharjee, Pinaki Prasad (2018) Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi2.1 eutectic high entropy alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Paul, S. and Tripathy, B. and Saha, R. and Bhattacharjee, Pinaki Prasad (2023) Microstructure and texture of heavily cold-rolled and annealed extremely low stacking fault energy Cr26Mn20Fe20Co20Ni14 high entropy alloy: Comparative insights. Journal of Alloys and Compounds, 930. pp. 1-12. ISSN 0925-8388

Pavithra, C L P and Janardhan, R K S K and Ummethala, Govind and M, Chandrasekhar and Malladi, Sairam K and Dey, Suhash Ranjan (2019) An Electrochemical Approach for Development of Novel Magnetic Multicomponent Alloy Thin Films for Sensor Applications. The Electrochemical Society.

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Joardar, Joydip and Sarada, Bulusu V. and Tamboli, Rameez R. and Hu, Yixuan and Zhang, Yumeng and Wang, Xiaodong and Dey, Suhash Ranjan (2021) An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy alloy thin films. Scientific Reports, 11 (1). ISSN 2045-2322

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Klement, Uta and Dey, Suhash Ranjan (2022) Graphene Oxide Reinforced Magnetic FeCoNiCuZn High Entropy Alloy through Electrodeposition. Journal of The Electrochemical Society, 169 (2). 022501. ISSN 0013-4651

Pavithra, Chokkakula L.P. and Rengan, Aravind Kumar and Dey, Suhash Ranjan and et al, . (2022) Primary attempt towards bioapplicability of one-dimensional high entropy alloys. Materials Letters, 312. pp. 1-4. ISSN 0167-577X

Peddiraju, Vivek C. and Athira, K. S. and Simhambhatla, Suryakumar and Chatterjee, Subhradeep (2021) Enhancing Surface Hardness of Titanium Through Ni-Ti Intermetallic Microstructures Formed In Situ During Weld Deposition of Nickel. Metallurgical and Materials Transactions A, 52 (2). pp. 591-604. ISSN 1073-5623

Peddiraju, Vivek Chaitanya and Suryakumar, S and Chatterjee, Subhradeep and et al, . (2019) Weld deposition of nickel on titanium for surface hardening with Ti-Ni-based intermetallic compounds. In: International Conference on Materials and Manufacturing Methods (3M ), 5-7 July 2019, Trichy, India. (In Press)

Peela, Bharadwaj and Bandaru, Pravallika and Dutta-Gupta, S. (2022) Janus Nanoparticles for Dual Wavelength Surface Enhanced Raman Scattering Applications. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Pillanagrovi, Jayakumar and Dutta-Gupta, S. (2022) Facile fabrication of nanoapertures with tunable plasmonic resonances. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Pillanagrovi, Jayakumar and Gupta, Shourya Dutta (2022) Controlled assembly of gold nanoparticles in resonant gold nanoapertures for SERS applications. Nanotechnology, 33 (48). ISSN 0957-4484

Pinaki, P B and Mohammed, Z A (2014) Effect of Warm-Rolling On the Formation of Microstructure and Microtexture of the Constituent Phases in a Duplex Steel. In: Materials Science Forum, 2-6, December 2013, Las Vegas, NV; United States.

Polisetty, Venkata Goutham and Varanasi, Santhosh Kumar and Jampana, Phanindra Varma (2022) Stochastic state-feedback control using homotopy optimization and particle filtering. International Journal of Dynamics and Control, 10 (3). pp. 942-955. ISSN 2195-268X

Prabahar, K and Ramadurai, Ranjit (2019) Growth and Characterization of lead free Multiferroic Ba0.85Ca0.15Zr0.10Ti0.90O3 –CoFe2O4 Nano Composite Thin Films. PhD thesis, Indian institute of technology Hyderabad.

Prabahar, K and Ramadurai, Ranjit and Saravanan, P and Srinivas, A (2018) Effect of Magnetic Field Annealing on the Magnetostriction and Deflection Properties of CoFe2O4 Thin Films Grown by PLD. Journal of Magnetism and Magnetic Materials. ISSN 0304-8853 (In Press)

Prabahar, K and Ramadurai, Ranjit and Srinivas, A and Kamat, S V and Mallesham, B and Niranjani, V L and Praveen, J P and Das, D (2017) Effect of deposition temperature on the microstructure, ferroelectric and mechanical properties of lead free BCZT ceramic thin films. Ceramics International, 43 (6). pp. 5356-5361. ISSN 0272-8842 (In Press)

Prasad, H and Singh, S and Panigrahi, Bharat Bhooshan (2017) Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy. Journal of Alloys and Compounds, 692. pp. 720-726. ISSN 0925-8388

Premasudha, Mookala and Bhumi Reddy, Srinivasulu Reddy and Lee, Yeon‐Ju and Panigrahi, Bharat B. and Cho, Kwon‐Koo and Nagireddy Gari, Subba Reddy (2021) Using artificial neural networks to model and interpret electrospun polysaccharide (Hylon VII starch) nanofiber diameter. Journal of Applied Polymer Science, 138 (11). p. 50014. ISSN 0021-8995

R

R, Manivannan (2016) Gelcasting of High Temperature Radome Materials by Using Inorganic Binders. PhD thesis, Indian Institute of Technology Hyderabad.

R, Navneeth and Malladi, Sairam K (2019) Corrosion behaviour of Nano-lamellar AlCrCoFeNi2.1 Eutectic High Entropy Alloy. Masters thesis, Indian institute of technology Hyderabad.

Radhakrishnan, Sidharth and Das, Partha Pratim and Chaudhary, Vijay (2022) Deciphering the pathways for evaluation of nanofillers for polymer composites: biodegradability, sustainability, and emerging applications. Biomass Conversion and Biorefinery. ISSN 2190-6815

Raineesh, K. P. and Sairam, K. and Rajesh, K. and Prasad, K. Eswar (2021) Novel approach to characterize the deformation under Berkovich and spherical indentations: Study on magnesium single crystals. Physical Review Materials, 5 (8). ISSN 2475-9953

Rajakumara, Eerappa and Abhishek, Suman and Nitin, Kulhar and et al, . (2022) Structure and Cooperativity in Substrate–Enzyme Interactions: Perspectives on Enzyme Engineering and Inhibitor Design. ACS Chemical Biology, 17 (2). pp. 266-280. ISSN 1554-8929

Rajamallu, Karre and Niranjan, Manish K and Dey, Suhash Ranjan (2013) Concept of designing novel beta-titanium alloys using first-principles calculations. In: International Conference on Advances in Chemical Engineering ACE2013, January 2013, Roorkee, India.

Rajamallu, Karre and Niranjan, Manish K and Kei, Ameyama and Dey, Suhash Ranjan (2017) Phase stability and elastic properties of β Ti-Nb-X (X=Zr, Sn) alloys: An ab-initio density functional study. Modelling and Simulation in Materials Science and Engineering. ISSN 0965-0393 (In Press)

Rajesh Kannan, A. and Mohan Kumar, S. and Pramod, R. and Pravin Kumar, N. and Siva Shanmugam, N. and Palguna, Yasam (2020) Microstructure and mechanical properties of wire arc additive manufactured bi-metallic structure. Science and Technology of Welding and Joining, 26 (1). pp. 47-57. ISSN 1362-1718

Rajesh Kannan, A. and Mohan Kumar, S. and Pramod, R. and Siva Shanmugam, N. and Palguna, Yasam and et al, . (2021) Microstructure and Mechanical Properties of Dissimilar Aluminum Alloys AA5052-H32 and AA2219-T31 Welded Using Cold Metal Transfer Process. Materials Performance and Characterization, 10 (1). ISSN 2379-1365

Rajesh Kannan, A. and Mohan Kumar, S. and Pravin Kumar, N. and Siva Shanmugam, N. and Vishnu, A.S. and Palguna, Yasam (2020) Process-microstructural features for tailoring fatigue strength of wire arc additive manufactured functionally graded material of SS904L and Hastelloy C-276. Materials Letters, 274 (127968). pp. 1-5. ISSN 0167-577X

Rajesh Kannan, A. and Siva Shanmugam, N. and Palguna, Yasam and Girinath, B. and Lee, Wonjoo and Yoon, Jonghun (2023) Effect of double-side welding on the microstructural characteristics and mechanical performance of dissimilar AA6061-AA5052 aluminium alloys. Materials Letters, 331. ISSN 0167-577X

Rajkumar, Y and Aakash, P A and Bhattacharya, Saswata and Panigrahi, Bharat Bhooshan (2016) Mechanically Activated Synthesis of Nanocrystalline Cr2 AiC Powders. In: Transactions of Powder Metallurgy Association of India.

Rajkumar, Yembadi and Panigrahi, Bharat Bhooshan (2017) Thermodynamic assessments and mechanically activated synthesis of ultrafine Cr2AlC MAX phase powders. Advanced Powder Technology, 28 (3). pp. 732-739. ISSN 09218831

Ram, S and V, Kanchana (2013) Fermi Surface Studies of Co-Based Heusler Alloys: Ab-Initio Study. In: 57th DAE Solid State Physics Symposium 2012; Bombay, 3-7, December 2012, Mumbai; India.

Ramachandran, Sivakumar and Niyas, Punnakadan and Vinekar, Anand and John, Renu (2021) A deep learning framework for the detection of Plus disease in retinal fundus images of preterm infants. Biocybernetics and Biomedical Engineering, 41 (2). pp. 362-375. ISSN 02085216

Ramadurai, Ranjit and Mallesham, B and Singh, D and et al, . (2018) Nanomechanical behavior of Pb(Fe0.5−xScxNb0.5)O3 multiferroic ceramics. Materials Research Express, 5 (11). ISSN 2053-1591

Ramakrishna, P. E. Seeram and Khandelwal, Mudrika (2014) Attributes of Engineers and Engineering Education for the Twenty-First-Century World. Journal of Engineering Education Transformations. pp. 47-55. ISSN 2349-2473

Raman, L. and Murty, B S and et al, . (2021) Strengthening mechanisms in CrMoNbTiW refractory high entropy alloy. Materials Science and Engineering: A, 819 (141503). ISSN 09215093

Rani, M Usha and Deshpande, Atul Suresh and Ramadurai, Ranjit (2015) Effect of Template and Processing Conditions on BiFeO3 Nanofoams Synthesized by Sol-gel Method. In: International Conference on Magnetic Materials and Applications ICMAGMA, December 2015, Chennai, India.

Rani, Malothu Usha and Naresh, Vangapally and Damodar, Devarakonda and Muduli, Sadananda and Martha, Surendra Kumar and Deshpande, Atul Suresh (2021) In-situ formation of mesoporous SnO2@C nanocomposite electrode for supercapacitors. Electrochimica Acta, 365. p. 137284. ISSN 00134686

Rani, P. Swetha and Andhavarapu, Sivaganesh and Kodukula, Sri Rama Murty (2020) Significance of Phase in DNN based speech enhancement algorithms. In: National Conference on Communications (NCC), 21-23 February 2020, Kharagpur, India.

Reddy, B.S. and In, Kim Hong and Panigrahi, Bharat B. and Paturi, Uma Maheswera Reddy and Cho, K.K. and Reddy, N.S. (2021) Modeling tensile strength and suture retention of polycaprolactone electrospun nanofibrous scaffolds by artificial neural networks. Materials Today Communications, 26. p. 102115. ISSN 23524928

Reddy, Bhumi Reddy Srinivasulu and Premasudha, Mookala and Panigrahi, Bharat B. and Cho, Kwon‐Koo and Reddy, Nagireddy Gari Subba (2020) Modeling constituent–property relationship of polyvinylchloride composites by neural networks. Polymer Composites, 41 (8). pp. 3208-3217. ISSN 0272-8397

Reddy, N S and Panigrahi, Bharat Bhooshan and Ho, C M and Kim, J H and Lee, C S (2015) Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys. Computational Materials Science, 107. pp. 175-183. ISSN 0927-0256 (In Press)

Reddy, N S and Panigrahi, Bharat Bhooshan and Krishnaiah, J (2013) Modeling mechanical properties of low carbon hot rolled steels. In: 7th International Conference on Bio-Inspired Computing: Theories and Applications, BIC-TA 2012, 14-16, December 2012, Gwalior, Madhya Pradesh; India.

Reddy, P V S and V, Kanchana and Ruban, A V and Christensen, N E (2017) Evidence for the antiferromagnetic ground state of Zr2TiAl: a first-principles study. Journal of Physics Condensed Matter, 29 (26). p. 265801. ISSN 0953-8984

Reddy, S R and Ahmed, M Z and Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2017) Effect of strain path on microstructure and texture formation in cold-rolled and annealed FCC equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 87. pp. 94-103. ISSN 0966-9795

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad (2019) Microstructural design by severe warm-rolling for tuning mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy. Intermetallics, 114. p. 106601. ISSN 09669795

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad and et al, . (2019) Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys. Materials Science and Engineering: A, 764. p. 138226. ISSN 09215093

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad and et al, . (2019) Microstructure and texture of a severely warm-rolled and annealed AlCoCrFeNi2.1 eutectic high entropy alloy. Journal of Physics: Conference Series, 1270. 012054. ISSN 1742-6588

Reddy, S. R. and Bapari, S. and Bhattacharjee, Pinaki Prasad and Chokshi, A. H. (2017) Superplastic-like flow in a fine-grained equiatomic CoCrFeMnNi high-entropy alloy. Materials Research Letters, 5 (6). pp. 408-414. ISSN 2166-3831

Reddy, S. R. and Yoshida, S and Bhattacharjee, Pinaki Prasad (2019) Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy. Scientific Reports, 9 (1). ISSN 2045-2322

Reddy, Seelam Rajasekhar and Sunkari, Upender and Bhattacharjee, Pinaki Prasad (2021) Recrystallization Behavior of High Entropy Alloys. In: Encyclopedia of Materials: Metals and Alloys. Elsevier, pp. 417-426.

Reddy, Seelam Rajasekhar and Sunkari, Upender and Lozinko, Adrianna and Guo, Sheng and Bhattacharjee, Pinaki Prasad (2019) Development and homogeneity of microstructure and texture in a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy severely strained in the warm-deformation regime. Journal of Materials Research. pp. 1-13. ISSN 0884-2914

Reddy, T S and Wani, I S and Bhattacharjee, T and Reddy, S R and Saha, R and Bhattacharjee, Pinaki Prasad (2017) Severe plastic deformation driven nanostructure and phase evolution in a Al 0.5 CoCrFeMnNi dual phase high entropy alloy. Intermetallics, 91. pp. 150-157. ISSN 0966-9795

Reddy B, Kumaar Swamy and Veeralingam, Sushmitha and Badhulika, Sushmee and et al, . (2022) High responsivity self-powered flexible broadband photodetector based on hybrid Selenium-PEDOT:PSS junction. Organic Electronics, 108. pp. 1-9. ISSN 1566-1199

Revathi, Janardhanan and Jyothirmayi, Adduru and Rao, Tata Narasinga and Deshpande, Atul Suresh (2019) Wood‐Derived Carbon Fibers Embedded with SnO x Nanoparticles as Anode Material for Lithium‐Ion Batteries. Global Challenges. p. 1900048. ISSN 2056-6646

Rohila, Sahil and Mane, Rahul B and Panigrahi, Bharat Bhooshan and et al, . (2019) Viscous flow assisted sintering of AlCoCrFeNi high entropy alloy powder. Materials Letters, 256. p. 126668. ISSN 0167577X

Rohila, Sahil and Mane, Rahul B and Ummethala, Govind and Panigrahi, Bharat Bhooshan (2019) Nearly full-density pressureless sintering of AlCoCrFeNi-based high-entropy alloy powders. Journal of Materials Research. pp. 1-10. ISSN 0884-2914

Roopavath, Uday Kiran and Sah, Mahesh Kumar and Panigrahi, Bharat Bhooshan and Rath, Subha Narayan (2019) Mechanochemically synthesized phase stable and biocompatible β-tricalcium phosphate from avian eggshell for the development of tissue ingrowth system. Ceramics International. ISSN 0272-8842 (In Press)

Roy, S and Maharana, R and Reddy, S R and Singh, S and Kumar, P and Karthik, T and Asthana, Saket and Prasad, V V B and Kamat, S V (2016) Structural, ferroelectric and piezoelectric properties of chemically processed, low temperature sintered piezoelectric BZT–BCT ceramics. Materials Research Express, 3 (3). ISSN 2053-1591

S

S, Suryakumar and Karunakaran, K P and Bernard, A and Chandrasekhar, U and Raghavender, N and Sharma, D (2011) Weld bead modeling and process optimization in Hybrid Layered Manufacturing. Computer-Aided Design, 43 (4). pp. 331-344. ISSN 0010-4485

S M, Rezwanul Islam and Deshpande, Atul Suresh (2018) Synthesis and characterization of PANI/CeO2 composite. Masters thesis, Indian Institute of Technology Hyderabad.

S S, Satheesh Kumar and Bhattacharjee, Pinaki Prasad (2019) HOT DEFORMATION BEHAVIOUR OF A POWDER METALLURGY NICKEL BASE SUPERALLOY. PhD thesis, Indian institute of technology Hyderabad.

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2015) Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy. Journal of Materials Science: Materials in Electronics, 50 (19). pp. 6444-6456. ISSN 0022-2461

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2016) Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy. Journal of Alloys and Compounds, 681 (5). pp. 28-42. ISSN 0925-8388

Sabban, Rushikesh and Dash, K. and Suwas, S. and Murty, B S (2022) Strength–Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. Springer.

Saha, J. and Saha, R. and Bhattacharjee, Pinaki Prasad (2022) Microstructure and texture development in CoCrNi medium entropy alloy processed by severe warm cross-rolling and annealing. Intermetallics, 143. pp. 1-12. ISSN 0966-9795

Saha, J. and Saha, R. and Bhattacharjee, Pinaki Prasad (2022) Microstructure and texture of severely warm-rolled and annealed coarse-grained CoCrNi medium entropy alloy (MEA): A perspective on the initial grain size effect. Journal of Alloys and Compounds, 904. pp. 1-11. ISSN 0925-8388

Saha, J. and Saha, R. and Malladi, Sai Rama Krishna and Bhattacharjee, Pinaki Prasad (2021) Microstructure and texture of CoCrNi medium entropy alloy (MEA) processed by severe cryo-rolling: A study vis-a-vis cold-rolling. Intermetallics, 138. pp. 1-10. ISSN 0966-9795

Saha, S and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path during Cold Rolling on the Evolution of Microstructure, Texture and Hardness Properties of Different Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Sahane, Disna and Singh, Sheela and Jadhav, Mahesh and Panigrahi, Bharat B. (2021) Isothermal and non-isothermal sintering characteristics of mechanically alloyed nonequiatomic Fe2CoCrMnNi high-entropy alloy powder. Powder Metallurgy, 64 (1). pp. 64-74. ISSN 0032-5899

Saini, Rahul Kumar and Bhattacharya, Saswata (2018) A Phase Field Study of Spinodal Decomposition in Systems with Variable Mobility. Masters thesis, Indian Institute of Technology Hyderabad.

Saj Mohan, M M and M V, S and Ramadurai, Ranjit (2018) Tip Induced Surface Defect migration and Conductivity Studies in Tetragonal, Rhombohedral and Mixed-Phase epitaxial BiFeO3 Thin Films. MRS Advances. pp. 1-6. ISSN 2059-8521

Sajan, S G and Dey, Suhash Ranjan (2012) Friction Stir Welding of Aluminum 6082 with Mild Steel and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

Sajan, Sajin G and Meshram, Manish and Dey, Suhash Ranjan and et al, . (2013) Friction Stir Welding of Aluminum 6082 with Mild Steel and its Joint Analyses. In: 2nd Annual International Conference on Materials Processing and Characterization, 2013, Hyderabad, India.

Sajmohan, M M and Ranjith, R and Chelvane, J Arout (2019) Effect of non- $$180^{\circ }$$ 180 ∘ polarization invariants on the exchange bias of tetragonal $$\langle 001\rangle $$ ⟨ 001 ⟩ and rhombohedral $$\langle 111\rangle $$ ⟨ 111 ⟩ orientations of bismuth ferrite epitaxial thin films. Bulletin of Materials Science, 42 (5). ISSN 0250-4707

Sankala, Sreekanth and Mohammad Rafi, B. Shaik and Kodukula, Sri Rama Murty (2020) Self Attentive Context dependent Speaker Embedding for Speaker Verification. In: National Conference on Communications (NCC), 21-23 February 2020, Kharagpur, India.

Saranath, K M and Sharma, Abhay and M, Ramji (2014) Zone wise local characterization of welds using digital image correlation technique. Optics and Lasers in Engineering, 63. pp. 30-42. ISSN 0143-8166

Sarila, Venu Kumar and Moinuddin, Syed Quadir and Cheepu, Muralimohan and Rajendran, Hamshini and et al, . (2022) Characterization of Microstructural Anisotropy in 17–4 PH Stainless Steel Fabricated by DMLS Additive Manufacturing and Laser Shot Peening. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Sarkar, Sanket and Gao, Yan and Huang, Shenyan and Bhattacharya, Saswata and et al, . (2020) Back-Stress and Its Evolution during Primary Creep in Particle Strengthened Nickel Superalloys. Crystals, 10 (4). pp. 1-13. ISSN 2073-4352

Sarker, B and Zehnder, T and Rath, Subha Narayan and Horch, R E and Kneser, U and Detsch, R and Boccaccini, A R (2017) Oxidized Alginate-Gelatin Hydrogel: A Favorable Matrix for Growth and Osteogenic Differentiation of Adipose-Derived Stem Cells in 3D. ACS Biomaterials Science & Engineering, 3 (8-SI). pp. 1730-1737. ISSN 2373-9878

Sasikumar, R. and Kannan, A. Rajesh and Kumar, S. Mohan and Pramod, R. and Kumar, N. Pravin and Shanmugam, N. Siva and Palguna, Yasam and et al, . (2022) Wire arc additive manufacturing of functionally graded material with SS 316L and IN625: Microstructural and mechanical perspectives. CIRP Journal of Manufacturing Science and Technology, 38. pp. 230-242. ISSN 1755-5817

Sasikumar, Shyama and Boden, Andrew and Pati, Falguni and et al, . (2022) Galactose Tethered Decellularized Liver Matrix: Toward a Biomimetic and Biofunctional Matrix for Liver Tissue Engineering. ACS Applied Bio Materials, 5 (6). pp. 3023-3037. ISSN 2576-6422

Sasikumar, Shyama and Chameettachal, Shibu and Kingshott, Peter and Cromer, Brett and Pati, Falguni (2022) Hepatogenic differentiation of adipose-derived mesenchymal stem cells directed by topographical cues: a proof of concept study. Proceedings of the Indian National Science Academy. ISSN 0370-0046

Sata, Amit and Dharaiya, Vishesh (2022) Geometry-Driven Criterion Function for Predicting Shrinkage Porosity in Stainless Steel Castings with T-Junction. Journal of Advanced Manufacturing Systems, 21 (03). ISSN 0219-6867

Satapathy, Yashobanta and Chatterjee, Subhradeep (2017) Laser Welding Studies on a Co-based Superalloy. Masters thesis, Indian Institute of Technology Hyderabad.

Satheesh Kumar, S S and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2017) Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates. Journal of Alloys and Compounds, 709. pp. 394-409. ISSN 0925-8388

Sathiaraj, G D and Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys. Journal of Alloys and Compounds, 664. pp. 109-119. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni–60 wt.%Co alloys. Journal of Alloys and Compounds, 637. pp. 267-276. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy. Materials Characterization, 109. pp. 189-197. ISSN 1044-5803

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad and Tsai, Che-Wei and Yeh, Jien-Wei (2016) Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 69. pp. 1-9. ISSN 0966-9795

Sathiaraj, G D and Lee, C and Tsai, C W and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and crystallographic texture in severely cold rolled high entropy equiatomic CoCrFeMnNi alloy during annealing. IOP Conference Series: Materials Science and Engineering, 82. pp. 1-4. ISSN 1757-8981

Sathiaraj, G D and Tsai, C W and Yeh, J W and Jahazi, M and Bhattacharjee, Pinaki Prasad (2016) The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 688 (B). pp. 752-761. ISSN 0925-8388

Seelam, Rajasekhar Reddy (2016) Effect of strain path on the evolution of microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Sen, Sanket and Mandal, S. and Sen, Arnab and et al, . (2022) Fragmentation dynamics of doubly charged camphor molecule following C 1s Auger decay. Physical Chemistry Chemical Physics, 24 (5). pp. 2944-2957. ISSN 1463-9076

Shaikh, Sufyan M. and Hariharan, V.S. and Yadav, Satyesh K. and Murty, B S (2020) CALPHAD and rule-of-mixtures: A comparative study for refractory high entropy alloys. Intermetallics, 127. pp. 1-7. ISSN 0966-9795

Sharma, B (2013) Annealing Effects on Accumulative Roll Bonded Aluminium Laminates of Different Purities. Masters thesis, Indian Institute of Technology Hyderabad.

Sharma, A k and Gautam, A K and Sastry, D V K and Singh, S G (2011) Design & simulation of low loss 5-bit Ku band Switched line MEMS phase shifter on GaAs. In: International Conference on MEMS, NANO and Smart Systems, 4-6, November 2011, Kuala Lumpur; Malaysia.

Sharma, Chandra S. and Khandelwal, Mudrika (2021) Polystyrene Recycling to Print Transfer. Resonance, 26 (9). pp. 1305-1310. ISSN 0971-8044

Sharma, Chandra Shekhar and Khandelwal, Mudrika (2023) Carbonized Bacterial Cellulose-Derived Binder-Free, Flexible, and Free-Standing Cathode Host for High-Performance Stable Potassium-Sulfur Batteries. ACS Applied Energy Materials, 6 (5). pp. 3042-3051. ISSN 2574-0962

Sharma, R K and Chouryal, Y N and Chaudhari, S and Saravanakumar, J and Dey, Suhash Ranjan and Ghosh, P (2017) Adsorption-Driven Catalytic and Photocatalytic Activity of Phase Tuned In2S3 Nanocrystals Synthesized via Ionic Liquids. ACS Applied Materials and Interfaces, 9 (13). pp. 11651-11661. ISSN 1944-8244

Shekhar, Shashank and Gautam, Sanjeev and Sharma, Bhasha and Sharma, Shreya and Das, Partha Pratim and Chaudhary, Vijay (2021) Deciphering the pathways for evaluation of nanotoxicity: Stumbling block in nanotechnology. Elsevier Ltd.

Shivaram, M J and Arya, Shashi Bhushan and Panigrahi, Bharat Bhooshan and et al, . (2020) Electrochemical Corrosion and Impedance Studies of Porous Ti–xNb–Ag Alloy in Physiological Solution. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Shivaram, M. J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2022) Development and Characterization of Biomedical Porous Ti–20Nb–5Ag Alloy: Microstructure, Mechanical Properties, Surface Bioactivity and Cell Viability Studies. Metals and Materials International. ISSN 1598-9623

Shivaram, M. J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2021) Tribocorrosion Behaviour of Biomedical Porous Ti–20Nb–5Ag Alloy in Simulated Body Fluid. Journal of Bio- and Tribo-Corrosion, 7 (2). ISSN 2198-4220

Shivaram, M.J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2020) Role of porosity on electrochemical corrosion behavior of porous Ti-20Nb-5Ag alloy in simulated body fluid. Materials Today: Proceedings, 33. pp. 5257-5261. ISSN 22147853

Simhambhatla, S and Karunakaran, K P and Chandrasekhar, U and Somashekara, M A (2013) A Study of the Mechanical Properties of Objects Built through Weld-Deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-10. ISSN 0954-4054

Singh, Amandeep and John, Renu and Nasution, Aulia M. and Wahyuono, Ruri Agung and Hatta, Agus M. (2021) Elastography measurement for soft material using digital holography. In: 4th International Seminar on Photonics, Optics, and Its Applications, ISPhOA 2020, 1-2 December 2020.

Singh, Kartar and Rinawa, Moti Lal and Das, Partha Pratim and et al, . (2022) Optimization of tribological performance of natural fibers/epoxy composites using ANOVA & TOPSIS approach. Materials Today: Proceedings, 56. pp. 2549-2555. ISSN 2214-7853

Singh, Vajinder and Kumar, Atul and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) Hot deformation of high-Nb-containing γ-TiAl alloy in the temperature range of 1000–1200 °C: microstructural attributes to hot workability. SN Applied Sciences, 1 (4). ISSN 2523-3963

Singh, Vajinder and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) Microstructural Characterization by Automated Crystal Orientation and Phase Mapping by Precession Electron Diffraction in TEM: Application to Hot Deformation of a γ-TiAl-based Alloy. Microscopy and Microanalysis. pp. 1-9. ISSN 1431-9276

Singh, Vajinder and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and et al, . (2020) Compressive creep behavior of a γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: The role of β(B2)-phase and concurrent phase transformations. Materials Science and Engineering: A, 774. pp. 1-13. ISSN 0921-5093 (In Press)

Singh, Vajinder and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and et al, . (2020) Dynamic recrystallization of a β(B2)-Stabilized γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: The contributions of constituent phases and Zener-Hollomon parameter modulated recrystallization mechanisms. Journal of Alloys and Compounds, 828. ISSN 0925-8388

Singh, Vajinder and Mondal, Chandan and Kumar, Atul and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy. Journal of Alloys and Compounds. ISSN 0925-8388 (In Press)

Singh, Vajinder and Mondal, Chandan and Sarkar, Rajdeep and Bhattacharjee, Pinaki Prasad and Ghosal, P (2021) Effects of Cr alloying on the evolution of solidification microstructure and phase transformations of high-Nb containing γ-TiAl based alloys. Intermetallics, 131. p. 107117. ISSN 0966-9795

Singh, Vajinder and Mondal, Chandan and Sharma, Aditya R. and Kumar, Atul and Bhattacharjee, Pinaki Prasad and et al, . (2021) Hot Deformation Behavior of γ-TiAl-Based Ti–45Al–8Nb–6Cr–0.2B Alloy in the γ + β Phase Field. In: Applications of Microscopy in Materials and Life Sciences. Springer Nature, pp. 135-144.

Sisodia, Rohit and Jerry, Kabir and Pratim Das, Partha and Gupta, Pallav and Gupta, Sumit and Chaudhary, Vijay (2022) Experimental study on mechanical behaviour of linen/epoxy and linen/hemp/epoxy hybrid polymer composite. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853

Sreenu, B. and Sarkar, Rajdeep and Kumar, S.S. Satheesh and Chatterjee, Subhradeep and Rao, G. Appa (2020) Microstructure and mechanical behaviour of an advanced powder metallurgy nickel base superalloy processed through hot isostatic pressing route for aerospace applications. Materials Science and Engineering: A, 797. p. 140254. ISSN 09215093

Sreeparvathy, P C and V, Kanchana and G, Vaitheeswaran (2016) Thermoelectric properties of zinc based pnictide semiconductors. Journal of Applied Physics, 119 (085701). pp. 1-8. ISSN 0021-8979

Srideep, Dasari and Sriram, Kasilingam and Kotha, Srinu and Babu, Deepu J. and Singh, Saurabh Kumar and Rao, K V (2022) Synthesis and Self‐assembly of Benzoperylene Benzimidazoles: Tunable Morphology with Aggregation‐Induced Enhanced Emission. Chemistry – An Asian Journal, 17 (8). ISSN 1861-4728

Srilakshmi, R and M, Ramji and Chinthapenta, Viswanath (2015) Fatigue crack growth study of CFRP patch repaired Al 2014-T6 panel having an inclined center crack using FEA and DIC. Engineering Fracture Mechanics, 134. pp. 182-201. ISSN 0013-7944

Srinivas, P. and Dey, Suhash Ranjan (2013) Combinatorial pulsed electrodeposition of binary Ni-Cu alloys. In: Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry , ELAC-2013, 2013, Hyderabad, India.

Srinivas, P. and Hamann, Sven and Dey, Suhash Ranjan (2013) Development of Ni–Cu Materials Library by Using Combinatorial Pulsed Electrodeposition. Transactions of the Indian Institute of Metals, 66 (4). pp. 429-432. ISSN 0972-2815

Sriram, K. and Pala, Jay and Haldar, Arabinda and Murapaka, Chandrasekhar and et al, . (2022) Effect of Annealing on Magnetization Reversal and Spin Dynamics in Co40Fe40B20 Thin Films. Journal of Superconductivity and Novel Magnetism. ISSN 1557-1939

Sriram, K. and Pala, Jay and Mondal, Rohiteswar and Paikaray, Bibekananda and Jain, Komal and Basheed, G. A. and Haldar, Arabinda and Murapaka, Chandrasekhar (2022) Effect of Annealing on Magnetization Reversal and Spin Dynamics in Co40Fe40B20 Thin Films. Journal of Superconductivity and Novel Magnetism. ISSN 1557-1939

Sriram, K. and Pala, Jay and Paikaray, Bibekananda and Haldar, Arabinda and Murapaka, Chandrasekhar (2021) Effect of seed layer thickness on the Ta crystalline phase and spin Hall angle. Nanoscale, 13 (47). pp. 19985-19992. ISSN 2040-3364

Sriramoju, S K and Kumar, D and Majumdar, Saptarshi and Dash, P S and Shee, Debaprasad and Banerjee, Raja (2021) Sustainability of coal mines: Separation of clean coal from the fine-coal rejects by ultra-fine grinding and density-gradient-centrifugation. Powder Technology, 383. pp. 356-370. ISSN 0032-5910

Sugathan, Sandeep and Bhattacharya, Saswata (2019) Phase-Field Modelling of Evolution of Compact Ordered Precipitates in Ternary Alloy Systems. MRS Advances, 4 (25-26). pp. 1457-1463. ISSN 2059-8521

Sugathan, Sandeep and Bhattacharya, Saswata (2019) A Phase-Field Study of Elastic Stress Effects on Phase Separation in Ternary Alloy Systems. PhD thesis, Indian institute of technology Hyderabad.

Sugathan, Sandeep and Bhattacharya, Saswata (2020) A phase-field study of elastic stress effects on phase separation in ternary alloys. Computational Materials Science, 172. p. 109284. ISSN 09270256

Sunkari, U. and Reddy, S.R. and Athira, K.S. and Chatterjee, S. and Bhattacharjee, Pinaki Prasad (2020) Effect of niobium alloying on the microstructure, phase stability and mechanical properties of CoCrFeNi2.1Nbx high entropy alloys: Experimentation and thermodynamic modeling. Materials Science and Engineering: A, 793 (139897). ISSN 09215093

Sunkari, Upender and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad and et al, . (2019) Microstructure and properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys. In: Proceedings Intermetallics, 2019, Bad Staffelstein, Germany.

Sunkari, Upender and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad and et al, . (2020) Tuning nanostructure using thermo-mechanical processing for enhancing mechanical properties of complex intermetallic containing CoCrFeNi2.1Nbx high entropy alloys. Materials Science and Engineering: A, 769. p. 138489. ISSN 09215093

Sunkari, Upender and Reddy, S R and Bhattacharjee, Pinaki Prasad and et al, . (2020) Heterogeneous precipitation mediated heterogeneous nanostructure enhances strength-ductility synergy in severely cryo-rolled and annealed CoCrFeNi2.1Nb0.2 high entropy alloy. Scientific Reports, 10 (6056). ISSN 2045-2322

Sunkari, Upender and Reddy, S R and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad (2019) Effect of prolonged aging on phase evolution and mechanical properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys. Materials Letters, 248. pp. 119-122. ISSN 0167-577X

Sushma, Mudigunda V. and Sabarigresan, M. and Jogdand, Anil Bankati and Yadav, Dokkari Nagalaxmi and Rengan, Aravind Kumar and Ramadurai, Ranjith (2022) Ferroelectric polarization of β-polyvinylidene fluoride as control and mitigator of infectious organisms. Materials Today Communications, 32. pp. 1-8. ISSN 2352-4928

T

Talapatra, A and Arout Chelvane, J and Mohanty, Jyoti Ranjan (2017) Tuning magnetic microstructure in Gd-Fe thin films: Experiment and Simulation. Journal of Magnetism and Magnetic Materials, 448. pp. 360-366. ISSN 0304-8853 (In Press)

Tamboli, Rameez R. and Dudala, Srinivas and Andersen, Dustin and Valle, Nathalie and Eswara, Santhana and Korla, Rajesh and Dey, Suhash Ranjan and et al, . (2022) Quantitative prediction of Al and learning grain boundary character in Al-rich interstitial free steel. Scripta Materialia, 219. pp. 1-5. ISSN 1359-6462

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Comprehensive Observations and Interpretations in Al-Rich Interstitial-Free High-Strength Steel via Process-Induced Structure Evolution. Journal of Materials Engineering and Performance. ISSN 1059-9495

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Fostering deep drawability through recrystallization texture strengthening in aluminum-rich interstitial free steel. Materials Characterization, 193. pp. 1-12. ISSN 1044-5803

Tamboli, Rameez Rajmahammad (2016) Microstructure and Texture Analyses of Similar Welded Industrially Relevant Materials through Friction Stir Welding: D6AC Steel, AISI 316L Steel and Ti-6Al-4V Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Tan, Li Ling and Loganathan, Nitin and Agarwalla, Sushama and Yang, Chun and Yuan, Weiyong and Zeng, Jasmine and Wu, Ruige and Wang, Wei and Duraiswamy, Suhanya (2022) Current commercial dPCR platforms: technology and market review. Taylor and Francis Ltd..

Terse-Thakoor, Trupti and Badhulika, Sushmee and Mulchandani, Ashok (2017) Graphene based biosensors for healthcare. Journal of Materials Research, 32 (15). pp. 2905-2929. ISSN 0884-2914

Thakur, Deepa and Kumar, Pawan and M, Sabarigresan and Ramadurai, Ranjith and et al, . (2021) Layer number dependent optical and electrical properties of CVD grown two-dimensional anisotropic WS2. Surfaces and Interfaces, 26. pp. 1-8. ISSN 2468-0230

Thakur, Deepa and Sato, Yukio and Sabarigresan, M. and Ramadurai, Ranjith and et al, . (2022) Enhanced optical emission at MoS2-WS2 heterostructure interface with n-N junction. Applied Surface Science, 606. pp. 1-9. ISSN 0169-4332

Tripathy, B. and Bhattacharjee, Pinaki Prasad (2022) Superior strength-ductility synergy of a cost-effective AlCrFe2Ni2 high entropy alloy with heterogeneous microstructure processed by moderate cryo-rolling and annealing. Materials Letters, 326. pp. 1-4. ISSN 0167-577X

Tripathy, B. and Malladi, Sairam K and Bhattacharjee, Pinaki Prasad (2022) Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing. Materials Science and Engineering: A, 831. pp. 1-12. ISSN 0921-5093

Tripathy, B. and Saha, R. and Bhattacharjee, Pinaki Prasad (2022) Microstructure and unusually strong recrystallization texture of the FCC phase of a cost-effective high-strength dual-phase AlCrFe2Ni2 high entropy alloy. Intermetallics, 145. pp. 1-12. ISSN 0966-9795

Trivedi, V. and Murty, B S and et al, . (2021) Effect of Refractory Tantalum Metal Filling on the Microstructure and Thermoelectric Properties of Co4Sb12Skutterudites. ACS Omega, 6 (5). pp. 3900-3909. ISSN 24701343

Trivedi, Vikrant and Battabyal, Manjusha and Murty, B.S. and Gopalan, Raghavan (2022) Interfacial thermoelectric and mechanical properties of indigenously prepared Ni–Cr–Cu/Co4Sb12 skutterudite thermoelectric joints. Ceramics International. pp. 1-8. ISSN 0272-8842

Trivedi, Vikrant and Tiadi, Minati and Murty, B S and et al, . (2022) Giant Thermoelectric Efficiency of Single-Filled Skutterudite Nanocomposites: Role of Interface Carrier Filtering. ACS Applied Materials & Interfaces, 14 (45). pp. 51084-51095. ISSN 1944-8244

Tsuji, N and Takatsuji, Y and Miyajima, Y and Bhattacharjee, Pinaki Prasad and Terada, D (2012) Stability of Cube oriented grains during cold-rolling of highly Cube-oriented polycrystalline nickel. Materials Science Forum, 702-3. pp. 402-405. ISSN 0255-5476

Tummala, Sharath Reddy and Bhattacharjee, Pinaki Prasad (2017) Severe Plastic Deformation Driven Nanostructure and Phase Evolution in a Dual-phase Al0.5 CoCrFeMnNi High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

U

Upadhyaya, M (2015) Fabrication of Epitaxial Thin Films by Pulsed Laser Deposition and Structural Studies of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3: a Lead Free Piezoelectric. Masters thesis, Indian Institute of Technology Hyderabad.

Usha Rani, Malothu and Nanaji, Katchala and Rao, Tata Narasinga and Deshpande, Atul Suresh (2020) Corn husk derived activated carbon with enhanced electrochemical performance for high-voltage supercapacitors. Journal of Power Sources, 471. p. 228387. ISSN 03787753

V

Vadnala, S and Asthana, Saket and Pal, Prem (2016) Investigation of near room temperature magnetocaloric, magnetoresistance and bolometric properties of Nd0.5La0.2Sr0.3MnO3: Ag2O manganites. Journal of Materials Science: Materials in Electronics, 27 (6). pp. 6156-6165. ISSN 0957-4522

Vaidya, M and Karati, Anirudha and Guruvidyathri, K. and Nagini, M. and Pradeep, K.G. and Murty, B S (2020) Suppression of σ-phase in nanocrystalline CoCrFeMnNiV high entropy alloy by unsolicited contamination during mechanical alloying and spark plasma sintering. Materials Chemistry and Physics, 255 (12355). pp. 1-9. ISSN 0254-0584

Varghese, Johny and Rajulapati, Koteswararao V. and Bhanu Sankara Rao, K. and et al, . (2022) Ambient, elevated temperature tensile properties and origin of strengthening in friction stir welded 6 mm thick reduced activation ferritic-martensitic steel plates in as-welded and post-weld normalised conditions. Materials Science and Engineering: A, 857. pp. 1-15. ISSN 0921-5093

Vasudevan, R and Karthik, T and Ganesan, S and Jayavel, R (2013) Effect of microwave sintering on the structural and densification behavior of sol-gel derived zirconia toughened alumina (ZTA) nanocomposites. Ceramics International, 39 (3). pp. 3195-3204. ISSN 0272-8842

Vasudevan, R and Karthik, T and Selvakumar, D and Ganesan, S and Jayavel, R (2014) Effect of microwave sintering on the structural, optical and electrical properties of BaTiO3 nanoparticles. Journal of Materials Science: Materials in Electronics, 25 (1). pp. 529-537. ISSN 0957-4522

Veeman, Dhinakaran and Alruqi, Mansoor and Kumar Subramaniyan, Mohan and Shanmugam Nallathambhi, Siva and Agnelo Browne, Micheal and Kamaraj, Ashok (2022) Fabrication of functionally graded material via gas tungsten arc welding based wire feeding additive manufacturing: Mechanical and microstructural characterization. Materials Letters, 324. pp. 1-4. ISSN 0167-577X

Veeresham, Mokali and Bhattacharjee, Pinaki Prasad (2020) Processing, Microstructure and Properties of Refractory High Entropy Alloys. PhD thesis, Indian Institute of Technology Hyderabad.

Veerla, Raja Sekhar and Sahatiya, Parikshit and Badhulika, Sushmee (2017) Fabrication of a flexible UV photodetector and disposable photoresponsive uric acid sensor by direct writing of ZnO pencil on paper. Journal of Materials Chemistry C, 5 (39). pp. 10231-10240. ISSN 2050-7526

Velpandian, Muthuraja and Ummethala, Govind and Malladi, Sai Rama Krishna and Meduri, Praveen (2022) Heterogeneous interface-induced electrocatalytic efficiency boosting of bimetallic Cu/Zn selenides for stable water oxidation and oxygen reduction reactions. Catalysis Science & Technology. pp. 1-13. ISSN 2044-4753

Velpandian, Muthuraja and Ummethala, Govind and Malladi, Sairam K and Meduri, Praveen (2022) Heterostructures of tin and tungsten selenides for robust overall water splitting. Journal of Colloid and Interface Science, 623. pp. 561-573. ISSN 0021-9797

Verma, M. and Sugathan, S. and Bhattacharya, Saswata and et al, . (2022) A computational analysis of universal behavior of thermal groove in a moving grain boundary. Scripta Materialia, 209. pp. 1-7. ISSN 1359-6462

Vicarelli, Leonardo and Migunov, Vadim and Malladi, Sairam K. and et al, . (2019) Single Electron Precision in the Measurement of Charge Distributions on Electrically Biased Graphene Nanotips Using Electron Holography. Nano Letters, 19 (6). pp. 4091-4096. ISSN 1530-6984

Vikram, R. J. and Verma, S. K. and Dash, K. and Fabijanic, D. and Murty, B. S. and et al, . (2022) Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy. Metallurgical and Materials Transactions A. ISSN 1073-5623

Villalobos, Luis Francisco and Babu, Deepu J. and Hsu, Kuang-Jung and et al, . (2022) Gas Separation Membranes with Atom-Thick Nanopores: The Potential of Nanoporous Single-Layer Graphene. Accounts of Materials Research. pp. 1-15. ISSN 2643-6728

W

Wani, I S and Bhattacharjee, Pinaki Prasad (2018) PROCESSING, STRUCTURE AND MECHANICAL BEHAVIOR OF DUAL PHASE AND NANO-LAMELLAR EUTECTIC HIGH ENTROPY ALLOYS. PhD thesis, Indian Institute of Technology, Hyderabad.

Wani, I S and Bhattacharjee, T and Sheikh, S and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing. Materials Science and Engineering: A, 675. pp. 99-109. ISSN 0921-5093

Wani, I S and Bhattacharjee, T and Sheikh, S and Clark, I T and Park, M H and Okawa, T and Guo, S and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy. Intermetallics, 84. pp. 42-51. ISSN 0966-9795

Wani, I S and Bhattacharjee, T and Sheikh, S and Lu, Y and Chatterjee, S and Guo, S and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy. IOP Conference Series: Materials Science and Engineering, 194. 012018. ISSN 1757-8981

Wani, I S and Bhattacharjee, T and Sheikh, S and Lu, Y P and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Ultrafine-Grained AlCoCrFeNi2.1Eutectic High-Entropy Alloy. Materials Research Letters, 4 (3). pp. 174-179. ISSN 2166-3831

Wani, I S and Sathiaraj, G D and Ahmed, M Z and Reddy, S R and Bhattacharjee, Pinaki Prasad (2016) Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy. Materials Characterization, 118. pp. 417-424. ISSN 1044-5803

Wu, Z and Raju, Gangadharan and Weaver, P (2017) Analysis and Design for the Moderately Deep Postbuckling Behavior of Composite Plates. Journal of Aircraft, 54 (1). pp. 327-335. ISSN 0021-8669

Y

Y, Rajkumar and Panigrahi, Bharat Bhooshan (2016) Sintering Mechanisms of Ultrafine Cr2AlC MAX Phase Powder. Materials Today Communications, 8. pp. 46-52. ISSN 2352-4928 (In Press)

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R (2019) Effective ink-jet printing of aqueous ink for Cu (In, Ga) Se2 thin film absorber for solar cell application. Solar Energy, 179. pp. 363-370. ISSN 0038-092X

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2021) Inkjet printed CuIn(1-X)GaXSe2 thin film by controlled selenium distribution for improved power conversion efficiency in chalcopyrite solar cells. Applied Surface Science Advances, 6. pp. 1-7. ISSN 2666-5239

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2019) Role of selenium content in selenization of inkjet printed CIGSe2 thin film solar cell. In: 3rd International Conference on Optoelectronic and Nano Materials for Advanced Technology, icONMAT, 3-5 January 2019, Kerala, India.

Yadav, Brijesh Singh and Koppoju, Suresh and Dey, Suhash Ranjan and et al, . (2020) Microstructural investigation of inkjet printed Cu(In,Ga)Se2 thin film solar cell with improved efficiency. Journal of Alloys and Compounds, 827. ISSN 0925-8388

Yadav, Sweta and Jana, Subhendu and Panigrahi, Gopabandhu and Malladi, Sairam K. and Niranjan, Manish K. and Prakash, Jai (2022) Five coordinated Mn in Ba4Mn2Si2Te9: synthesis, crystal structure, physical properties, and electronic structure. Dalton Transactions, 51 (24). pp. 9265-9277. ISSN 1477-9226

Yebaji, Sushil and Saurav, Ayush and Chauhan, Pranjal and Murty, B S and et al, . (2022) Phase Stability of AlCoTiZn High-Entropy Alloy Prepared by Mechanical Alloying. Journal of Materials Engineering and Performance. ISSN 1059-9495

Yebaji, Sushil Gyanoba (2015) Micro structure-Texture Evolution Studies on IMI 834 Titanium Alloy during High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Yembadi, R and Bapurao, R and Akash, P A and Panigrahi, Bharat Bhooshan (2017) Nonisothermal sintering of Cr2AlC powder. International Journal of Applied Ceramic Technology, 14 (1). pp. 63-67. ISSN 1546-542X

Yembadi, Rajkumar (2017) Synthesis and Sintering Kinetics of Ultrafine Cr2AlC MAX Phase Powders. PhD thesis, Indian Insitute of Technology Hyderabad.

Z

Zaid, M and Bhattacharjee, Pinaki Prasad (2014) Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel. Materials Characterization, 96. pp. 263-272. ISSN 1044-5803

Zaid, M and Bhattacharjee, Pinaki Prasad (2015) Microtexture of constituent phases in a heavily warm- rolled and annealed duplex stainless steel. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Zamin, Hasnat and Ramadurai, Ranjit (2017) Synthesis and studies of PVDF-BiFeO3 hybrid nano-composites for flexural piezoelectric applications. Masters thesis, Indian Insitute of Technology Hyderabad.

Zhang, H and Xing, Y and Gosalvez, M A and Pal, Prem and Sato, K (2015) Removal probability function for Kinetic Monte Carlo simulations of anisotropic etching of silicon in alkaline etchants containing additives. Sensors and Actuators A: Physical, 233. pp. 451-459. ISSN 0924-4247