Items where Subject is "Others > Mechanics"

A

A, Abhishek and K, Venkatasubbaiah (2011) Numerical Study on Mixed Convection Flow of Heat Source Modules Mounted On a Horizontal Plate. Masters thesis, Indian Institute of Technology.

Abhijith, M. S. and Venkatasubbaiah, K. (2021) NUMERICAL STUDY OF VARIATION IN DRAG AND VIRTUAL MASS FORCES FOR A NANOFLUID FLOW THROUGH A MICROCHANNEL USING EULERIAN-EULERIAN TWO-PHASE MODEL. Computational Thermal Sciences: An International Journal, 13 (2). pp. 57-73. ISSN 1940-2503

Abraham, Anoop Sam and Banerjee, Raja (2019) Development of a Non-Reacting LES Solver for Unstructured Grid. Masters thesis, Indian institute of technology Hyderabad.

Ade, Someshwar Sanjay and Kirar, Pavan Kumar and Chandrala, Lakshmana Dora and Sahu, Kirti Chandra (2023) Droplet size distribution in a swirl airstream using in-line holography technique. Journal of Fluid Mechanics, 954 (A39). ISSN 0022-1120

Adinath, Kangude Prasad (2016) Development of Thermodynamic Model for Conventional SI Engine Simulation and Detailed Testing Analysis of a Lean Combustion in PFI SI Engine. Masters thesis, Indian Institute of Technology Hyderabad.

Agawane, Girish Babanrao (2014) Prediction of Sloshing Noise in Rectangular Tank. Masters thesis, Indian Institute of Technology Hyderabad.

Agrawal, M and Katiyar, Rajat Kumar and Sahu, Kirti Chandra and Karri, Badarinath (2018) Experimental investigation of a freely falling liquid drop in air. In: 71st Annual Meeting of the APS Division of Fluid Dynamics, 18–20 November 2018, Atlanta, Georgia.

Agrawal, M and Vyasarayani, Chandrika Prakash (2015) Stability of time-periodic wake flow. Masters thesis, Indian Institute of Technology Hyderabad.

Ahsan, Zaid and Uchida, T K and Vyasarayani, C P (2016) Adaptive sparse Galerkin methods for vibrating continuous structures. Transactions of the Canadian Society for Mechanical Engineering, 40 (1). pp. 19-29. ISSN 0315-8977

Ahsan, Zaid and Vyasarayani, Chandrika Prakash (2015) Mathematical Modeling and Stability Analysis of Delay Differential Equations. Masters thesis, Indian Institute of Technology Hyderabad.

Ali Anshari, Md Anwar and Imam, Murshid and Khan Yusufzai, Mohd Zaheer and Chinthapenta, Viswanath and Mishra, Rajnish (2021) Stir zone anisotropic work hardening behavior in friction stir processed EN8 medium carbon steel. Materials Science and Engineering: A, 805. p. 140582. ISSN 09215093

Amogh, R N and Mahanta, T K and B, Venkatesham (2017) Free vibration analysis of circular membrane backed by cylinder cavity using mode coupling approach. In: ICOVP, 13th International Conference on Vibration Problems, 29th November-2nd December, IIT Guwahati.

Andraju, L. B. and Ramji, M. and et al, . (2021) Snap-buckling and failure studies on CFRP laminate with an embedded circular delamination under flexural loading. Composites Part B: Engineering, 214. p. 108739. ISSN 13598368

Anurag, Amit (2015) Experimental Investigating Of GDI Spray. Masters thesis, Indian Institute of Technology Hyderabad.

Asghar, J and Lingam, R and Shibin, E and Reddy, N Venkata (2014) Tool path design for enhancement of accuracy in single-point incremental forming. Proceedings of The Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 228 (9). pp. 1027-1035. ISSN 0954-4054

Asghar, J and Reddy, N Venkata (2013) Importance of Tool Configuration in Incremental Sheet Metal Forming of Difficult to Form Materials Using Electro-Plasticity. In: World Congress on Engineering, WCE 2013, 3-5 July 2013, London; United Kingdom.

Assam, Ashwani and Kalkote, Nikhil Narayan and Dongari, Nishanth and Eswaran, Vinayak (2018) Comprehensive Evaluation of a New Type of Smoluchowski Temperature Jump Condition. AIAA Journal. pp. 1-5. ISSN 0001-1452

Automobile Club, Torque (2015) Automobile Magazine: Burnout Vol.01 Ed.01. IITH. (Unpublished)

B

B, Mrunalini and Eswaran, Vinayak (2012) Development of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation. Masters thesis, Indian Institute of Technology Hyderabad.

B, Venkatesham (2013) Acoustic-Structural Coupled Analysis of a Flexible Rectangular Duct. In: 20th International Congress on Sound and Vibration 2013, ICSV 2013, 7-11 July 2013, Bangkok; Thailand.

B, Vikram (2015) Cross Coupled Quadruped Robot Bounding with Leg Mass. Masters thesis, Indian Institute of Technology Hyderabad.

B V, Himasekhar Sai (2014) Development of Functionally Graded Material through Friction Stir Processing. Masters thesis, Indian Institute of Technology Hyderabad.

Babu, G. V. N. Yatendra and Sarkar, Vaskar (2020) Transient Instability Mitigation via Repetitive Corrective Actions Based Upon the Real-Time Macrocoherency Evaluation. IEEE Systems Journal, 14 (4). pp. 5084-5095. ISSN 1932-8184

Baghel, A K (2013) Cfd Study of Sloshing in Rectunglar Tank. Masters thesis, Indian Institute of Technology Hyderabad.

Balu, Kumthekar Nitin and S, Suryakumar (2017) Experimental Studies on Assessment and Reduction of Surface Waviness for Weld Deposition based Additive Manufacturing. Masters thesis, Indian institute of technology Hyderabad.

Bandari, Vijendra (2015) Induction assisted friction stir welding (i-fsw): A Novel Hybrid process for joining of Thermoplastics. Masters thesis, Indian Institute of Technology Hyderabad.

Banerjee, Nilanjan (2016) Investigation on Multi-Point Minimum Quantity Lubrication Machining. PhD thesis, Indian Institute of Technology Hyderabad.

Banerjee, Nilanjan and Sharma, Abhay (2018) Improving machining performance of Ti-6Al-4V through multi-point minimum quantity lubrication method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054

Banerjee, Nilanjan and Sharma, Abhay (2018) A comprehensive assessment of minimum quantity lubrication machining from quality, production, and sustainability perspectives. Sustainable Materials and Technologies. pp. 1-26. ISSN 2214-9937 (In Press)

Bhagat, A and Gijare, H and Dongari, Nishanth (2019) Modeling of Knudsen Layer Effects in the Micro-Scale Backward-Facing Step in the Slip Flow Regime. Micromachines, 10 (2). pp. 1-15. ISSN 2072-666X

Bhatnagar, S and Mullick, S and Gopinath, M (2021) A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding. Optik, 247. p. 168015. ISSN 0030-4026

Bhise, V S (2013) Application of DIC in Solid Mechanics. Masters thesis, Indian Institute of Technology Hyderabad.

Bisht, G (2015) Supersonic Plume Impingement from Second Stage Rocket Motor. Masters thesis, Indian Institute of Technology Hyderabad.

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and Anand, Vivek and K M, Aravind and A K, Jeevanantham and B, Saravanan (2019) Effects of n-octanol as a fuel blend with biodiesel on diesel engine characteristics. Fuel, 235. pp. 363-373. ISSN 00162361

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and Azad, Kalam and Patel, Deepam and B, Sudarshan and Aaditya Ramasamy, R (2019) Study on isobutanol and Calophyllum inophyllum biodiesel as a partial replacement in CI engine applications. Fuel, 235. pp. 984-994. ISSN 0016-2361

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and K R, Tarun and Dharmaraj, Arumuga Perumal and Kaisan, Muhammad Usman (2018) Experimental study of methyl tert-butyl ether as an oxygenated additive in diesel and Calophyllum inophyllum methyl ester blended fuel in CI engine. Environmental Science and Pollution Research, 25 (33). pp. 33573-33590. ISSN 0944-1344

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and Muniappan, SenthilKumar and Reddy, Dandu Madhu Sudan and Subhash, Randive Vishal and Pravin, Nashte Adarsh and Subbarao, Rayapati (2018) Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel. Environmental Science and Pollution Research. pp. 1-17. ISSN 0944-1344

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and P, Somasundaram and C, Jegadheesan and Chaturvedi, Bhaskar and Sharma, Shivam and Patni, Gaurang (2018) A novel study on the effect lemon peel oil as a fuel in CRDI engine at various injection strategies. Energy Conversion and Management, 172. pp. 517-528. ISSN 0196-8904

C

C L, Harikrishnan (2015) Numerical and Experimental Analysis of Surface Residual Stress during Incremental Sheet Forming. Masters thesis, Indian Institute of Technology Hyderabad.

Chakraborty, Debasis and Eswaran, Vinayak and Sharma, Vatsalya (2020) Computational Analysis of Transverse Sonic Injection in Supersonic Crossflow Using RANS Models. Journal of Fluids Engineering, 142 (6). ISSN 0098-2202

Chakraborty, Sayan and Kandala, Shanti Swaroop and Vyasarayani, C P (2018) Reduced Ordered Modelling of Time Delay Systems Using Galerkin Approximations and Eigenvalue Decomposition. IFAC-PapersOnLine, 51 (1). pp. 566-571. ISSN 2405-8963

Chandra, Shiv Krishan and M, Ramji (2018) An experimental study on the stability behaviour of curved CFRP panel under axial compression load. Masters thesis, Indian Institute of Technology Hyderabad.

Chavan, P N and B, Venkatesham (2015) Free Vibration Analysis of a Rectangular Duct with Different Axial Boundary Conditions. The International Journal of Acoustics and Vibration, 20 (1). pp. 10-14. ISSN 1027-5851

D

D, Veerababu and B, Venkatesham (2018) Acoustic analysis of extended inlet/extended outlet concentric tube resonator using Green’s function. In: 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering.

Dey, Mohar and Vivek, Atul S and Dixit, Harish Nagaraj and Richhariya, Ashutosh and Feng, James J (2019) A model of tear-film breakup with continuous mucin concentration and viscosity profiles. Journal of Fluid Mechanics, 858. pp. 352-376. ISSN 0022-1120

Dighe, A S and Eswaran, Vinayak (2012) Numerical Computation of Compressible Fluid Flows. Masters thesis, Indian Institute of Technology Hyderabad.

Dirbude, Sumer and Kushari, Abhijit and Eswaran, Vinayak (2018) Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions. In: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 73-82. ISBN 9789811326967

Dixit, Harish Nagaraj and Homsy, G M (2013) The elastocapillary Landau-Levich problem. Journal of Fluid Mechanics, 735. pp. 1-28. ISSN 0022-1120

Dsouza, Cyril and K, Venkatasubbaiah (2018) Effect of angle of attack and ow separation control on scramjet inlet using Hybrid RANS/LES. Masters thesis, Indian Institute of Technology Hyderabad.

Duryodhan, V S and Singh, Shiv Govind and Agrawal, A (2014) Liquid flow through converging microchannels and a comparison with diverging microchannels. Journal of Micromechanics and Microengineering, 24 (12). ISSN 0960-1317

G

Gaddam, Saritha and Banerjee, Raja (2020) Bubble dynamics of a pressure-driven cavitating flow in a micro-scale channel using a high density pseudo-potential Lattice Boltzmann method. Heat Transfer Engineering, 41 (6-7). pp. 1-15. ISSN 0145-7632

Gajbhiye, N and Eswaran, Vinayak (2015) Numerical simulation of MHD flow and heat transfer in a rectangular and smoothly constricted enclosure. International Journal of Heat and Mass Transfer, 83. pp. 441-449. ISSN 0017-9310

Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2013) Effect of a magnetic field on natural convection in a curved geometry. In: ISHMT-ASME Heat and Mass Transfer Conference, 28-31 december, IIt Kharagpur, India.

Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2019) Effect of radial magnetic field on the natural convection in a semi-circular curved enclosure for different aspect ratios. Sadhana, 44 (4). ISSN 0256-2499

Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2018) MHD buoyant flow in a cubical enclosure at low to high Hartmann number. International Journal of Thermal Sciences, 134. pp. 168-178. ISSN 1290-0729

Gangele, Aparna and Garala, S K and Pandey, Ashok Kumar (2018) Influence of Van der Waals Forces on Elastic and Buckling Characteristics of Vertically Aligned Carbon Nanotubes. International Journal of Mechanical Sciences. ISSN 0020-7403 (In Press)

Garala, Sathish Kumar and Pandey, Ashok Kumar (2012) Analysis of Linear and Non-Linear Stress-Strain Properties for Graphene and Single Walled Carbon Nanotubes. Masters thesis, Indian Institute of Technology Hyderabad.

Gaurav, Kumar (2015) Stability Analysis of Machining Processes. Masters thesis, Indian Institute of Technology Hyderabad.

Ghatode, Kishor and Chinthapenta, Viswanath (2018) Computational Modeling of Growth with and without discontinuities in the biological structure. Masters thesis, Indian Institute of Technology Hyderabad.

Gijare, H and Assam, A and Dongari, Nishanth (2016) Aero-Thermodynamics Optimization of Re-Entry Capsule in the Slip Flow Regime. In: Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC, 17-20 December, 2015, Thiruvananthapuram, India.

Gijare, H and Bhagat, A and Dongari, Nishanth (2019) Numerical investigation of a chemically reacting and rarefied hypersonic flow field. Shock Waves. pp. 1-15. ISSN 0938-1287

Godbole, Kirtiratan and Das, C. R. and Joardar, J. and Albert, S. K. and Ramji, M. and Panigrahi, Bharat B. (2020) Toughening of AISI 410 Stainless Steel Through Quenching and Partitioning and Effect of Prolonged Aging on Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 51 (7). pp. 3377-3383. ISSN 1073-5623

Goka, Suresh and S, Suryakumar (2019) Thermo-Mechanical Analysis and Characterization of Wire Arc Additive Manufactured Components. PhD thesis, Indian institute of technology Hyderabad.

Golla, Siva Teja and K, Mayur and B, Venkatesham and Banerjee, Raja (2018) Experimental study of sloshing noise in a partially filled rectangular tank under periodic excitation. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ISSN 0954-4070

Gyanadutta, S (2013) Linear and Nonlinear Analysis of DC Biased Coupled Microbeams. Masters thesis, Indian Institute of Technology Hyderabad.

H

H, Sriram (2015) Cohesive zone modelling of cracked interface. Masters thesis, Indian Institute of Technology Hyderabad.

Harilal, R (2015) A novel way to determine crack tip stress field parameters involving displacement field estimated using digital image correlation technique. Masters thesis, Indian Institute of Technology Hyderabad.

Harish, R and Venkatasubbaiah, K (2013) Numerical Simulation of fire spread in elevator shaft connected to adjacent lobby in tall building. In: 13th International conference on Fire Science and Engineering, 24-26 June 2013, University of London, UK.

Hedau, Mridul and S, Suryakumar (2018) Temperature Distribution during Single Pass Multi-Layer Welding in Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Hussain, Ajmal (2015) Spectrum design with distributed delays using Galerkin approximations. Masters thesis, Indian Institute of Technology Hyderabad.

I

Ikkurthi, Sivakoteswararao (2015) Performance Characteristics of Semi-Active and Passive Damper using Different Car Models. Masters thesis, Indian Institute of Technology Hyderabad.

Imam, Murshid and Sun, Yufeng and Fujii, Hidetoshi and MA, Ninshu and Tsutsumi, Seiichiro and Ahmed, Shuja and Chinthapenta, Viswanath and Murakawa, Hidekazu (2018) Deformation characteristics and microstructural evolution in friction stir welding of thick 5083 aluminum alloy. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

J

Jade, Nagaraja and B, Venkatesham (2018) Free vibrational analysis of rectangular ducts with different joint conditions. Journal of Theoretical and Applied Mechanics, 56 (4). pp. 1069-1081. ISSN 1429-2955

Jade, Nagaraja and B, Venkatesham (2018) Vibro-Acoustic behaviour of Flexible Rectangular Ducts. PhD thesis, Indian institute of technology Hyderabad.

Jadhav, Atul (2015) Development and validation of CAE based methodology to study sloshing of liquid in an automotive fuel tank. Masters thesis, Indian Institute of Technology Hyderabad.

Jadhav, Sumit (2015) Uncertainty estimation in determining liquid and vapor penetration lengths for Diesel like spray injection. Masters thesis, Indian Institute of Technology Hyderabad.

Jadon, V (2013) Numerical & Experimental Study of Sloshing of Liquid in a Rectangular Tank. Masters thesis, Indian Institute of Technology Hyderabad.

Jagtap, Rohit shashikant and K, Venkatasubbaiah (2018) Large eddy simulation of tunnel fire with blockage and roof vents. Masters thesis, Indian Institute of Technology Hyderabad.

Jain, Rajeev and Chinthapenta, Viswanath (2018) Interface delamination in stepped lap repaired CFRP panel under tensile loading. Masters thesis, Indian Institute of Technology Hyderabad.

Janardhanan, V. and Prasanth Kumar, R. (2018) Generating real-time trajectories for a planar biped robot crossing a wide ditch with landing uncertainties. Robotica. pp. 1-32. ISSN 0263-5747 (In Press)

Ji, J and Bi, Y B and K, Venkatasubbaiah and Li, K Y (2016) Influence of aspect ratio of tunnel on smoke temperature distribution under ceiling in near field of fire source. Applied Thermal Engineering, 106. pp. 1094-1102. ISSN 1359-4311

K

K, Patel Rakeshkumar (2013) Numerical Simulation of Orion CEV Re-Entry Vehicle. Masters thesis, Indian Institute of Technology Hyderabad.

K, Santhosh Kumar (2013) CFD Analysis of Fuel Spray Characteristics Inside a GDI Engine. Masters thesis, Indian Institute of Technology Hyderabad.

K, Nirmal and M S, Mahesh (2018) Acoustics performance of mufflers with baffles. Masters thesis, Indian Institute of Technology Hyderabad.

K, Santhan Reddy and Sharma, Abhay (2017) A computational approach to achieve uniform mechanical properties along the built-up direction in WAAM component. Masters thesis, Indian institute of technology Hyderabad.

K, Varaprasad and Raju, Gangadharan (2018) Experimental and numerical studies on the damage behaviour of open hole CFRP composite specimen subjected to compression. Masters thesis, Indian Institute of Technology Hyderabad.

Kale, Rakesh and Banerjee, Raja (2019) Experimental investigation on GDI spray behavior of isooctane and alcohols at elevated pressure and temperature conditions. Fuel, 236. pp. 1-12. ISSN 0016-2361

Kalkote, Nikhil and Assam, Ashwani and Eswaran, Vinayak (2020) Toward the implementation of a multi-component framework in a density-based flow solver for handling chemically reacting flows. International Journal of Numerical Methods for Heat & Fluid Flow, ahead- (ahead-). ISSN 0961-5539

Kalkote, Nikhil Narayan and Assam, Ashwani and Eswaran, Vinayak (2018) Acceleration of Later Convergence in a Density-Based Solver Using Adaptive Time Stepping. AIAA Journal. pp. 1-13. ISSN 0001-1452

Kalkote, Nikhil Narayan and Assam, Ashwani and Eswaran, Vinayak (2018) Towards developing an adaptive time stepping for compressible unsteady flows. International Journal of Numerical Methods for Heat & Fluid Flow. ISSN 0961-5539 (In Press)

Kalkote, Nikhil Narayan and Assam, Ashwani and Nived, M R and Eswaran, Vinayak (2019) Investigation of All-Speed SLAU Scheme in Incompressible Limit. In: Fifth International Conference on Computational Methods for Thermal Problems, 9-11 July 2018, Indian Institute of Science, Bangalore, India.

Kamani, Ravikumar V and B, Venkatesham (2018) Vibro-acoustics analysis of uid-filled shells using the transfer matrix method. Masters thesis, Indian Institute of Technology Hyderabad.

Kambali, P N and Pandey, Ashok Kumar (2015) Nonlinear Response of a Microbeam Under Combined Direct and Fringing Field Excitation. Journal of Computational and Nonlinear Dynamics, 10 (5). ISSN 1555-1415

Kambali, Prashant N and Pandey, Ashok Kumar (2016) Linear and Nonlinear Frequency Analysis of Single and Multibeam MEMS Arrays. PhD thesis, Indian Institute of Technology Hyderabad.

Kandala, Shanti Swaroop and Uchida, Thomas K and Vyasarayani, C P (2019) Pole placement for time-delayed systems using Galerkin approximations. Journal of Dynamic Systems, Measurement, and Control. ISSN 0022-0434

Kandala, Shanti Swaroop and Vyasarayani, Chandrika Prakash (2018) Pole placement for delay differential equations with time-periodic delays using Galerkin approximations. IFAC-PapersOnLine, 51 (1). pp. 560-565. ISSN 2405-8963

Kapil, Angshuman (2015) Numerical and Experimental Analysis of Magnetic Pulse Welding for Joining Similar and Dissimilar Materials. Masters thesis, Indian Institute of Technology Hyderabad.

Kashfuddoja, M and M, Ramji (2013) Whole-field strain analysis and damage assessment of adhesively bonded patch repair of CFRP laminates using 3D-DIC and FEA. Composites Part B: Engineering, 53. pp. 46-61. ISSN 1359-8368

Keskar, Harshad Nitin (2016) Three-Dimensional Study of Annular Chamber Mufflers using Green's Function Method. Masters thesis, Indian Institute of Technology Hyderabad.

Khaderi, Syed Nizamuddin and Scherer, M R J and Hall, C E and Steiner, U and Ramamurty, U and Fleck, N A and Deshpande, V S (2017) The indentation response of Nickel nano double gyroid lattices. Extreme Mechanics Letters, 10. pp. 15-23. ISSN 23524316

Khandagale, Sudarshan and R, Prasanth Kumar (2018) Development of Plotter Using Parallel Manipulator. Masters thesis, Indian Institute of Technology Hyderabad.

Khare, Vivek Kumar and S, Suryakumar (2018) Thermal Management Approaches for Distortion Control in Metal Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading. Composites Part B: Engineering. ISSN 1359-8368 (In Press)

Kothari, Mayur N (2015) Validation of CAE based Methodology to Predict Sloshing Noise in Automotive Fuel Tank. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Shashi (2014) Numerical Simulation of Supersonic Flow over a Flat Plate. Masters thesis, Indian Institute of Technology.

Kumar, Avinash (2015) Finite Element Modeling of Weld Deposition Based Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, D S V S (2015) Cooperative Load Sharing by Nao Humanoid Robots. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Manish and Quadir Moinuddin, Syed and Kumar, S. Surya and Sharma, Abhay (2021) Discrete wavelet analysis of mutually interfering co-existing welding signals in twin-wire robotic welding. Journal of Manufacturing Processes, 63. pp. 139-151. ISSN 15266125

Kumar, Mrityunjay (2015) Arc stability analysis of twin-wire welding using wavelet energy entropy. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Pankaj and Eswaran, Vinayak (2013) Parametric Study of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Ravi and K, Venkatasubbaiah (2012) Numerical Study on Buoyancy Induced Flow in Enclosures Connected By Horizontal Vents. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Sachin and Reddy, N Venkata (2017) Electric Pulse Aided Bending: An Experimental Study. Masters thesis, Indian institute of technology Hyderabad.

Kumar , B and Mittal, S (2012) On the origin of the secondary vortex street. Journal of Fluid Mechanics, 711. pp. 641-666. ISSN 0022-1120

L

Lin, P P S (2014) Rigid Body Translation In Multistage Single Point Incremental Forming. Masters thesis, Indian Institute of Technology, Hyderabad.

Lingam, R and Reddy, N Venkata (2019) TOOL PATH GENERATION SYSTEM FOR DOUBLE SIDED INCREMENTAL FORMING. PhD thesis, Indian institute of technology Hyderabad.

M

M, Bhanu Prakash and M, Ramji (2011) Towards an optimum patch in composite patch repair by finite element method. Masters thesis, Indian Institute of Technology.

M, Sreejith and Khaderi, Syed Nizamuddin (2018) Numerical modelling of fluid structure interaction using fictitious domain method. Masters thesis, Indian Institute of Technology Hyderabad.

M A, Somashekara and Banerjee, Raja (2011) Numerical Simulation of Spin Coating Process for Circular Disc. Masters thesis, Indian Institute of Technology Hyderabad.

M A, Somashekara and S, Suryakumar (2016) MANUFACTURE OF FUNCTIONALLY GRADIENT OBJECTS THROUGH WELD-DEPOSITION. PhD thesis, Indian institute of technology Hyderabad.

M.S, A. and Venkatasubbaiah, K. (2020) Numerical investigation of jet impingement flows with different nanofluids in a mini channel using Eulerian-Eulerian two-phase method. Thermal Science and Engineering Progress, 19. p. 100585. ISSN 24519049

Madhuranthakam, Yoganandh and B, Venkatesham (2018) Prediction of Breakout Noise from a Rectangular Duct using SEA and Deterministic methods. Masters thesis, Indian Institute of Technology Hyderabad.

Mahanta, T K and B, Venkatesham (2018) Sound Quality Evaluation of Automotive horn. PhD thesis, Indian institute of technology Hyderabad.

Majumder, Sutrisha (2015) Development of a General-Purpose Compressible Flow AnuPravaha Based Solver using an Implicit Method (Thermo Fluids). Masters thesis, Indian Institute of Technology Hyderabad.

Mashetty, Nikhil (2015) Development of Robotic Hand. Masters thesis, Indian Institute of Technology Hyderabad.

Mathews, Jobin T and Khaderi, Syed Nizamuddin (2018) Implementation of the boundary element method. Masters thesis, Indian Institute of Technology Hyderabad.

Matta, A and P A, Lakshmi Narayana and Hill, A A (2016) Nonlinear thermal instability in a horizontal porous layer with an internal heat source and mass flow. Acta Mechanica. pp. 1-9. ISSN 0001-5970 (In Press)

Matta, Seshadri and Kolanu, Naresh Reddy and Chinthapenta, Viswanath and Manjunatha, C M and M, Ramji (2019) Progressive damage analysis of adhesively bonded patch repaired carbon fibre–reinforced polymer specimen under compression involving cohesive zone model. International Journal of Damage Mechanics. ISSN 1056-7895

Matta, Seshadri and M, Ramji (2018) Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM. International Journal of Adhesion and Adhesives. ISSN 0143-7496 (In Press)

Maurya, Mithilesh Kumar and Dixit, Harish Nagaraj (2018) ALE method to Solve Multiphase Flows. Masters thesis, Indian Institute of Technology Hyderabad.

Md, Yousuf Ahmed and Appam, N and Md, Nayeemuddin and Md, Ahmed and Md, Abdullah (2017) Design and Simulation of Solar Car. International Journal of Scientific Research in Science, Engineering and Technology, 3 (2). pp. 373-377. ISSN 2395 - 1990

Md., Shahid Ansari (2015) Studies on Additive Manufacturing of Hard and Soft Scaffold for Tissue Engineering Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Meena, Rajesh Kumar (2015) Micro-Mechanics of Re-entrant Hexagonal Auxetic Structures and Its Blast Resistance. Masters thesis, Indian Institute of Technology Hyderabad.

Mishra, Rajnish and Pillai, Anoop and Imam, Murshid and Chinthapenta, Viswanath and et al, . (2022) Experimental and Numerical Investigation of Double Pass Overlapping Beads by Twin-Wire Welding Additive Manufacturing Process. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Mohan, Shashi Ranjan and S, Suryakumar (2019) Adopting feature resolution and material distribution constraints into topology optimisation of additive manufacturing components. Virtual and Physical Prototyping, 14 (1). ISSN 1745-2759

Mohanty, Uttam Kumar and Rana, Jaydev and Sharma, Abhay (2017) Multi-objective optimization of electro-discharge machining (EDM) parameter for sustainable machining. Materials Today: Proceedings, 4 (8). pp. 9147-9157. ISSN 2214-7853

Mohanty, Uttam Kumar and Sharma, Abhay and Nakatani, Mitsuyoshi and Kitagawa, Akikazu and Tanaka, Manabu and Suga, Tetsuo (2018) A Semi-Analytical Nonlinear Regression Approach for Weld Profile Prediction: A Case of Alternating Current Square Waveform Submerged Arc Welding of Heat Resistant Steel. Journal of Manufacturing Science and Engineering, 140 (11). ISSN 1087-1357

Moinuddin, S Q and Kapil, A and Kohama, K and Sharma, Abhay and Ito, K and Tanaka, M (2016) On process-structure-property interconnection in anti-phase synchronised twin-wire GMAW of low carbon steel. Science and Technology of Welding and Joining, 61 (6). pp. 452-459. ISSN 1362-1718

Moinuddin, S Q and Sharma, Abhay (2018) ASSESSMENT OF ARC STABILITY AND ITS IMPACT IN ANTI-PHASE SYNCHRONIZED TWIN-WIRE GAS METAL ARC WELDING. PhD thesis, Indian institute of technology Hyderabad.

Motali, B K and Sharma, Abhay (2013) Rotating Tool Cold Expansion. Masters thesis, Indian Institute of Technology Hyderabad.

Muhammad, Shuaib N K (2016) Buckling and Post Buckling Analysis of CFRP Laminated Panel under Uniaxial Compressive Loading. PhD thesis, Indian Institute of Technology Hyderabad.

N

N, Om Prakash Raj and K, Venkatasubbaiah (2012) Design and Analysis of Generic Hypersonic Scramjet Inlets. Masters thesis, Indian Institute of Technology Hyderabad.

N, Satish and K, Venkatasubbaiah (2019) Numerical investigations of flow and heat transfer characteristics between turbulent double jet impingement and a moving plate. Journal of Thermal Science and Engineering Applications. ISSN 1948-5085

N K, Muhammad Shuaib and M, Ramji and Kolanu, Naresh Reddy and Raju, Gangadharan (2017) FEA and Experimental Analysis on Buckling and Post-buckling Behavior of CFRP Composite Panel Using Digital Image Correlation Technique. In: Advances in Structural Integrity. Springer, pp. 527-537.

Naik, Aditya S (2016) Effect of operating parameters on the combustion, performance and emission characteristics of a diesel fueled CRDi engine. Masters thesis, Indian Institute of Technology Hyderabad.

Nalawade, Amogh R (2015) Vibro-acoustic analysis of the Veena. Masters thesis, Indian Institute of Technology Hyderabad.

Namdeo, C P and B, Venkatesham (2012) Free Vibration Analysis of HVAC Ducts. Masters thesis, Indian Institute of Technology Hyderabad.

Nanthagopal, K and Ashok, B and B, Saravanan and M, Ramesh Pathy and G, Sahil and A, Ramesh and Md, Nurun Nabi and Mpohammed, Golam Rasul (2019) Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine. Fuel, 239. pp. 862-873. ISSN 0016-2361

Neelapu, S (2014) Numerical Simulation of Turbulent Mixed Convection Flow with and Without Moving Plate in a Channel. Masters thesis, Indian Institute of Technology Hyderabad.

Nighot, Rohit Prakash and Pandey, Ashok Kumar (2018) Drag force computation in single and arrays of micromechanical beams with uniform and arrow shaped width. Masters thesis, Indian Institute of Technology Hyderabad.

Nimje, Yashdeep (2016) Partial delamination detection and quantification in composite laminates using Laser Doppler Vibrometer. Masters thesis, Indian Institute of Technology Hyderabad.

Nimmagadda, R and K, Venkatasubbaiah (2016) Numerical Investigation on Conjugate Heat Transfer Performance of Microchannel Using Sphericity-Based Gold and Carbon Nanoparticles. Heat Transfer Engineering, 38 (1). pp. 87-102. ISSN 0145-7632

Nived, M R and Eswaran, Vinayak (2018) Parallelization of a Hybrid Unstructured Grid Density-based Flow Solver. Masters thesis, Indian institute of technology Hyderabad.

Nogar, Stephen M and Serrani, Andrea and Gogulapati, Abhijit and McNamara, Jack J and Oppenheimer, Michael W and Doman, David B (2018) Design and Evaluation of a Model-Based Controller for Flapping-Wing Micro Air Vehicles. Journal of Guidance, Control, and Dynamics, 41 (12). pp. 2513-2528. ISSN 0731-5090

P

P, Jabir Ubaid (2013) Damage Prediction in Fiber Reinforced Composites. Masters thesis, Indian Institute of Technology Hyderabad.

P, Nithish Reddy (2013) Numerical Investigations on Development of Scramjet Propulsion System. Masters thesis, Indian Institute of Technology Hyderabad.

P, Mastanaiah and Sharma, Abhay (2018) Electron Beam Welding and Friction Stir Welding of Dissimilar Aluminium Alloys (AA2219 and AA5083). PhD thesis, Indian Institute of Technology Hyderabad.

P, Mastanaiah and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Role of hybrid tool pin profile on enhancing welding speed and mechanical properties of AA2219-T6 friction stir welds. Journal of Materials Processing Technology, 257. pp. 257-269. ISSN 0924-0136

P, Vinay kumar and S, Suryakumar (2012) Evaluation of Rapid Manufacturing Solutions for Improved Knee Implants Using Finite Element Analysis. Masters thesis, Indian Institute of Technology Hyderabad.

Pai, R N and M, Ramji (2012) Effect of Interface Crack and Corner Singularity in Bimaterial System – Experimental and Numerical Investigation. Masters thesis, Indian Institute of Technology Hyderabad.

Panaskar, N J (2013) A Noval Concept of Combined Cold Expansion and Surface Processing of Fastener Holes Using Rotating Tool. Masters thesis, Indian Institute of Technology Hyderabad.

Panaskar, N J and Sharma, Abhay (2013) On feasibility of friction stir processing of cylindrical hole. In: 1st International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

Panchagnula, Jayaprakash Sharma and S, Suryakumar (2017) Additive manufacturing of complex metallic objects with overhanging features: slicing and path planning strategies. PhD thesis, Indian institute of technology Hyderabad.

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Inclined slicing and weld-deposition for additive manufacturing of metallic objects with large overhangs using higher order kinematics. Virtual and Physical Prototyping, 11 (2). pp. 99-108. ISSN 1745-2759

Pandharkar, Sammed (2015) Fatigue Crack growth study of composite patch repaired Aluminum Al 2014-T6 panel under Variable Amplitude Loading. Masters thesis, Indian Institute of Technology Hyderabad.

Pandya, Pankaj and Chinthapenta, Viswanath (2017) Investigation of Single Fiber Composite residual strength pre and post fragmentation: Using Progressive Damage Analysis and HFGMC framework. PhD thesis, Indian institute of technology Hyderabad.

Pappachan, Joseph (2015) Numerical simulation of Orion CEV re-entry vehicle at low altitude. Masters thesis, Indian Institute of Technology Hyderabad.

Parchuru, Venkatadri and Chinthapenta, Viswanath (2018) Strain gradient effects on FCC single crystal. Masters thesis, Indian Institute of Technology Hyderabad.

Parre, M D and Sharma, Abhay and Eswaran, Vinayak (2011) Heat and Fluid Flow Modeling in Twin-Wire Welding. Masters thesis, Indian Institute of Technology Hyderabad.

Patil, Prataprao (2015) Some Fracture Studies using Digital Photoelasticity. Masters thesis, Indian Institute of Technology Hyderabad.

Patil, Sitanshu Vasant and R, Prasanth Kumar (2018) Biped Robot: Design and Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Patne, Ramkarn and Ramon, Guy Z. and Agnon, Yehuda and et al, . (2022) Dynamics of a two-layer flow with an interfacial heat source/sink: viscosity stratification. Journal of Fluid Mechanics, 934. pp. 1-31. ISSN 0022-1120

Pawde, D J (2014) Development of Biped Robot with Backdrivablity. Masters thesis, Indian Institute of Technology Hyderabad.

Pillarisetti, Lalith Sai Srinivas and Talreja, Ramesh (2019) On quantifying damage severity in composite materials by an ultrasonic method. Composite Structures, 216. pp. 213-221. ISSN 0263-8223

Pole, Ramu and Karri, Badarinath (2018) Experimental studies on motion of falling flat thin disk inside liquid. Masters thesis, Indian Institute of Technology Hyderabad.

Potukuchi, Sasidhar and Chinthapenta, Viswanath and Raju, Gangadharan (2022) A review of NDE techniques for hydrogels. Nondestructive Testing and Evaluation. pp. 1-33. ISSN 1058-9759

Prakash Raj, N. O. and Venkatasubbaiah, K (2020) A new approach for the design of hypersonic scramjet inlet. American Institute of Physics Inc..

Pravinchandra, K Y (2015) Progressive Damage Analysis of Open Cut-out CFRP Laminates under Transverse Bending. Masters thesis, Indian Institute of Technology Hyderabad.

Purohit, B (2015) Frequency analysis of non-uniform bolted beams. Masters thesis, Indian Institute of Technology Hyderabad.

R

R, Harilal and Vyasarayani, C P and M, Ramji (2015) A linear least squares approach for evaluation of crack tip stress field parameters using DIC. Optics and Lasers in Engineering, 75. pp. 95-102. ISSN 0143-8166

R, Harish (2014) Numerical investigation of buoyancy induced turbulent flows in partially open enclosures. PhD thesis, Indian Institute of Technology Hyderabad.

R, Harish and K, Venkatasubbaiah (2016) Non-Boussinesq approach for turbulent buoyant flows in enclosure with horizontal vent and forced inlet port. Applied Mathematical Modelling, 40 (2). pp. 927-941. ISSN 0307-904X

R, Harish and K, Venkatasubbaiah (2013) Numerical simulation of turbulent plume spread in ceiling vented enclosure. European Journal of Mechanics, B/Fluids, 42. pp. 142-158. ISSN 0997-7546

R, Lingam and O, Prakash and Belk, J H and Reddy, N Venkata (2016) Automatic feature recognition and tool path strategies for enhancing accuracy in double sided incremental forming. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768

R, Srilakshmi (2014) Experimental and Numerical Investigation of Adhesively Bonded Composite Patch Repair of an Inclined Center Cracked Aluminium Panel under Static and Fatigue Load. PhD thesis, Indian Institute of Technology Hyderabad.

Rajan, H and Venkatasubbaiah, K (2013) Entrainment effects through horizontal and vertical vents on turbulent natural convection flows. In: 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, 28-31 december 2013, IIt Kharagpur, India.

Raviprolu, P (2013) Sound Radiation Characteristics of Rectangular Duct. Masters thesis, Indian Institute of Technology Hyderabad.

Reddy, G D (2019) A class of parameter choice rules for stationary iterated weighted Tikhonov regularization scheme. Applied Mathematics and Computation, 347. pp. 464-476. ISSN 0096-3003

Reddy, N Venkata and Lingam, R (2018) Double Sided Incremental Forming: Capabilities and Challenges. Journal of Physics: Conference Series, 1063. pp. 1-6. ISSN 1742-6588

Reddy, R and Banerjee, Raja (2014) Simulation of a gas blasted liquid sheet on GPU architecture. In: ILASS – Europe 2014 26th Annual Conference on Liquid Atomization and Spray Systems, Sept. 2014, Bremen, Germany.

Reddy, S Rajesh and Banerjee, Raja (2016) Numerical Study of Liquid Sheet Atomization Using Two-Phase Flow Solver on GPU Architecture. PhD thesis, Indian Institute of Technology Hyderabad.

Reddy, Santhan and Kumar, Manish and Panchagnula, Jayaprakash Sharma and Parchuri, Pradeep Kumar and S, Suryakumar and Ito, Kazuhiro and Sharma, Abhay (2019) A new approach for attaining uniform properties in build direction in additive manufactured components through coupled thermal-hardness model. Journal of Manufacturing Processes, 40. pp. 46-58. ISSN 1526-6125

Reddy, V R K and Subbiah, M (2018) On shear instability and propagation of surface gravity waves in sea straits. The European Physical Journal Plus, 133 (475). pp. 1-17. ISSN 2190-5444

Reddy, Veerabhadra and Venkatesham, B. and Narayana Murthy, Vijaya (2020) Prediction of acoustic modal characteristics of two dimensional irregular shaped cavities by impedance mobility compact matrix (IMCM) approach. Journal of Theoretical and Applied Mechanics, 59 (1). pp. 95-107. ISSN 1429-2955

Robi, Mathews (2013) Effect of Area-Filling Path on the Residual Stresses Developed During Weld-Deposition Based Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Rodrigues, Troglio John Allister and R, Prasanth Kumar (2018) Design Assembly and Gait Generation of a Quadruped Robot. Masters thesis, Indian Institute of Technology Hyderabad.

S

S, Bibin (2015) A Hybrid Approach to Model the Temperature Effect in Tire Forces and Moments. Masters thesis, Indian Institute of Technology Hyderabad.

S, Gurucharan and M, Ramji (2018) Progressive damage analysis of CFRP Laminate with circular cutouts under flexural loading. Masters thesis, Indian Institute of Technology Hyderabad.

S, Pavan Reddy and Khaderi, Syed Nizamuddin (2018) Impact analysis on Sandwich structures with steel panels and aluminum foam core. Masters thesis, Indian institute of technology Hyderabad.

S, Suryakumar and Somashekara, M A (2013) Manufacturing of functionally gradient materials by using weld-deposition. In: International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

S M, Bhagath and R, Prasanth Kumar (2011) A Rule Based Biped Dynamic Walking. Masters thesis, Indian Institute of Technology.

S S, Jayakrishnan and Dixit, Harish Nagaraj (2018) On a general method to determine van der Waals interactions in inhomogeneous thin film. Masters thesis, Indian Institute of Technology Hyderabad.

Saha, S and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path during Cold Rolling on the Evolution of Microstructure, Texture and Hardness Properties of Different Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Sahoo, Debesh Kumar and Pandey, Ashok Kumar (2018) Performance of non-uniform cantilever based piezoelectric energy harvester. ISSS Journal of Micro and Smart Systems, 7 (1). pp. 1-13. ISSN 2509-7989

Sahu, C (2014) Upper Bound Analysis of Single Point Incremental Forming. Masters thesis, Indian Institute of Technology Hyderabad.

Sahu, Kirti Chandra (2016) Double-diffusive instability in core-annular pipe flow. Journal of Fluid Mechanics, 789. pp. 830-855. ISSN 0022-1120

Sahu, Nagesh Kumar and Pandey, Ashok Kumar (2018) Dynamic analysis of structure with bolted joint and identifying joint parameters. Masters thesis, Indian Institute of Technology Hyderabad.

Saleem, Abdullah and Farooq, Shamsuzzaman and Karimi, Iftekhar A and Banerjee, Raja (2018) CFD simulation of a full scale LNG storage tank. Computer Aided Chemical Engineering, 44 (1). pp. 883-888. ISSN 1570-7946

Salvaji, Vishwas Rana (2015) Development of a Multiphase Incompressible flow Solver. Masters thesis, Indian Institute of Technology Hyderabad.

Samukham, S (2015) Homotopy Continuation for Characteristic Roots of Delay Differential Equation. Masters thesis, Indian Institute of Technology Hyderabad.

Samukham, Surya and Raju, Gangadharan and Vyasarayani, C P and Weaver, Paul M (2019) Dynamic instability of curved variable angle tow composite panel under axial compression. Thin-Walled Structures, 138. pp. 302-312. ISSN 0263-8231

Saritha, G and Banerjee, Raja (2019) Development and application of a high density ratio pseudopotential based two-phase LBM solver to study cavitating bubble dynamics in pressure driven channel flow at low Reynolds number. European Journal of Mechanics, B/Fluids, 75. pp. 83-96. ISSN 0997-7546

Satish, N. and Venkatasubbaiah, K. (2020) Conjugate heat transfer analysis of liquid metal turbulent flow through a horizontal channel by LES. Numerical Heat Transfer, Part A: Applications, 78 (4). pp. 140-157. ISSN 1040-7782

Saxena, Prashant (2017) Finite deformations and incremental axisymmetric motions of a magnetoelastic tube. Mathematics and Mechanics of Solids. p. 108128651769750. ISSN 1081-2865

Shaikh, M (2013) Large Eddy Simulation of Turbulent Incompressible Flow Using GPU with Multigrid Algorithm. Masters thesis, Indian Institute of Technology Hyderabad.

Sharaf M, Dilin (2016) Experimental Studies on Regime Mapping of a Rising Bubble. Masters thesis, Indian Institute of Technology Hyderabad.

Sharma, P K (2015) Analysis of Drop Bouncing on Solid Hydrophobic Surface. Masters thesis, Indian Institute of Technology Hyderabad.

Shedolkar, Pravinkumar (2015) Analysis and Development of Fan Noise Prediction Methodology. Masters thesis, Indian Institute of Technology Hyderabad.

Shivaji, W Y (2015) Modal Analysis for De lamination Detection in Composite Laminates using Laser Doppler Vibrometer and FEA. Masters thesis, Indian Institute of Technology Hyderabad.

Singh, M (2011) Thermal Behavior of Optical Fibers during the Cooling Stage of the Drawing Process. Masters thesis, Indian Institute of Technology.

Singroul, Nathu Lal (2015) Effect of parameters on Grain Orientation Behaviour In Single Point Incremental Forming. Masters thesis, Indian Institute of Technology Hyderabad.

Soni, Sourabh and Chinthapenta, Viswanath (2018) Theoretical and Experimental Characterization of Surface Cracks in FGM and Anisotropic Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.

Suryakumar, S and Somashekara, M A (2013) Manufacture of Functionally Gradient Materials Using Weld-Deposition. In: 24th International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2013, 12-13, August 2013, Austin, TX; United States.

Swami, Aakash and Pandey, Ashok Kumar (2020) Vibration Analysis of a Tire Under Static Loading Using Flexible Ring-Based Model. Journal of Vibration and Acoustics, 143 (1). pp. 1-11. ISSN 1048-9002

Swaminathan, G and Sahu, K C and Sameen, A and Govindarajan, R (2011) Global instabilities in diverging channel flows. Theoretical and Computational Fluid Dynamics, 25 (1-4). pp. 53-64. ISSN 0935-4964

T

T, Raja jayasingh and Banerjee, Raja (2012) Numerical Analysis of Thermal Spray Coating Process. Masters thesis, Indian Institute of Technology Hyderabad.

Talele, Milind (2015) Study of fatigue damage mechanisms in composites: Numerical and experimental investigation. Masters thesis, Indian Institute of Technology Hyderabad.

Tekure, V. and Venkatasubbaiah, K. (2021) Effect of Mach number and plate thickness on the flow field and heat transfer characteristics of supersonic turbulent flow over a flat plate at different thermal boundary conditions. European Journal of Mechanics - B/Fluids, 88. pp. 160-177. ISSN 09977546

Tekure, V. and Venkatasubbaiah, K. (2021) Numerical investigation on the extrusive and intrusive subcavity types and their location on the primary recirculation zone for the supersonic turbulent flow through cavity type flameholders. Thermal Science and Engineering Progress, 25. p. 100987. ISSN 24519049

Thomas, Mithun K and Khaderi, Syed Nizamuddin (2018) Experimental setup of split Hopkinson pressure bar. Masters thesis, Indian Institute of Technology Hyderabad.

Thorat, Satish Prakash and M, Ramji (2018) Study of interaction effect between a line inclusion and a hole using Digital Photoelasticity. Masters thesis, Indian Institute of Technology Hyderabad.

U

U V, Avinash (2014) Effect of Build Parameters on the Strength of FDM Parts. Masters thesis, Indian Institute of Technology.

V

V S, Nikhil (2014) Nonlinear Free Vibration Analysis of Nanobeams With Nonlocal and Surface Effects. Masters thesis, Indian Institute of Technology Hyderabad.

Vaishya, Shri and Abhyankar, Abhijit and Sarkar, Vaskar (2020) Marginal Loss Modeling based DCOPF and LMP Calculations for an Integrated AC and Multi-terminal HVDC System. IEEE Transactions on Power Systems, 36 (3). p. 1. ISSN 0885-8950

Vatsalya, S (2014) Development of Parallel CFD Solver for Three Dimnesional Unstructured Grid. Masters thesis, Indian Institute of Technology Hyderabad.

Veerkar, V V and M, Ramji (2012) A Study on Experimental Determination of Mixed-Mode Sif’s Using Digital Photoelasticity and DIC. Masters thesis, Indian Institute of Technology Hyderabad.

Vinu, V (2015) Non-Linear Dynamics of Cylindrical Tubes in a Cross-Flow Heat-Exchanger. Masters thesis, Indian Institute of Technology Hyderabad.

Vishwakarma, S D and Pratap, R and Pandey, A K and Parpia, J M and Southworth, D R and Barton, R A and Craighead, H G (2013) Estimation of Acoustic Losses in the Quality Factor of a Micromechanical 2D Resonator. In: 20th International Congress on Sound and Vibration 2013, ICSV 2013, 7-11 July 2013, Bangkok; Thailand.

Vohra, M and Banerjee, Raja (2011) Evaporation of Ethanol/Iso-Octane Droplets (A Binary Component Fuel). Masters thesis, Indian Institute of Technology Hyderabad.

W

Wakale, A B and Banerjee, S and Banerjee, Raja (2018) Experimental and chemical kinetic study of the impact of n-butanol blending on the gross engine performance of a CRDI engine. Energy Conversion and Management, 178. pp. 400-414. ISSN 0196-8904

Y

Yadav, Mukul (2016) Numerical Modelling of Drag Forces in Micro mechanical Beams Array. Masters thesis, Indian Institute of Technology Hyderabad.