Items where Subject is "Physics > Mechanical and aerospace > Transportation Science & Technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 23.

Article

Agawane, G and Jadon, Varun and B, Venkatesham and Banerjee, Raja (2017) An Experimental Study of Sloshing Noise in a Partially Filled Rectangular Tank. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (2). ISSN 1946-4002 (In Press)

Chowdhary, Sarwasva and Reddy, S. Rajesh and Banerjee, Raja (2020) Detailed numerical simulations of unequal sized off-centre binary droplet collisions. International Journal of Multiphase Flow, 128 (103267). ISSN 03019322

Eswaran, Vinayak (2023) Computation of drag crisis of a circular cylinder using Hybrid RANS-LES and URANS models. Ocean Engineering, 270. p. 113645. ISSN 0029-8018

Ghaisas, Niranjan S (2023) Large Eddy Simulation Study of Atmospheric Boundary Layer Flow over an Abrupt Rough-to-Smooth Surface Roughness Transition. Boundary-Layer Meteorology, 188 (2). pp. 229-257. ISSN 0006-8314

Golla, Siva Teja and Venkatesham, B. (2021) Experimental study on the effect of centrally positioned vertical baffles on sloshing noise in a rectangular tank. Applied Acoustics, 176. p. 107890. ISSN 0003682X

Kolhe, Pankaj (2023) Effect of Co- and Counterswirl Air on Swirl Airblast Atomization. Journal of Propulsion and Power, 39 (3). pp. 426-437. ISSN 0748-4658

Kumar, Prabhat (2023) TOPress: a MATLAB implementation for topology optimization of structures subjected to design-dependent pressure loads. Structural and Multidisciplinary Optimization, 66 (4). p. 97. ISSN 1615-147X

Pandey, Ashok Kumar (2023) Hydrodynamic forces in non-uniform cantilever beam resonator. International Journal of Mechanical Sciences, 244. p. 108078. ISSN 0020-7403

Ramji, M and Sidhardh, Sai (2023) Modeling of adhesively bonded single scarf CFRP joint behavior using energy-based approach. Composite Structures, 314. p. 116950. ISSN 0263-8223

Reddy, N Venkata (2023) Optimal process planning for energy consumption and product quality during double-sided incremental forming. International Journal of Advanced Manufacturing Technology, 125 (7-8). pp. 3305-3327. ISSN 0268-3768

Roy, Debaditya and Ishizaka, Tetsuhiro and Mohan, C. K. and et al, . (2022) Detection of Collision-Prone Vehicle Behavior at Intersections Using Siamese Interaction LSTM. IEEE Transactions on Intelligent Transportation Systems, 23 (4). pp. 3137-3147. ISSN 1524-9050

S, Bibin and Pandey, Ashok Kumar (2017) A Hybrid Approach to Model the Temperature Effect in Tire Forces and Moments. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (1). pp. 25-37. ISSN 1946-4002

Satyanarayana Raju, P. and Nayak, Guguloth Mahesh and Balusamy, S. (2021) Effect of Air Co-flow on Flickering Motion of LPG Laminar Diffusion Jet Flame. Lecture Notes in Mechanical Engineering. pp. 717-725. ISSN 2195-4356

Simhambhatla, S (2023) A novel methodology to manufacture complex metallic sudden overhangs in weld-deposition based additive manufacturing. Rapid Prototyping Journal, 29 (2). ISSN 1355-2546

Siva Teja, Golla and Saurav Vara Prasad, Chennuri and Venkatesham, B. and Sri Rama Murty, K. (2021) Identification of sloshing noises using convolutional neural network. The Journal of the Acoustical Society of America, 149 (5). pp. 3027-3041. ISSN 0001-4966

Sucheendran, M.M. (2023) Modeling of geometrical stiffening in a rotating bladeā€”A review. Journal of Sound and Vibration, 548. p. 117526. ISSN 0022-460X

Unni, Vishnu R (2023) Inhibiting the onset of thermoacoustic instability through targeted control of critical regions. International Journal of Spray and Combustion Dynamics, 15 (1). pp. 3-15. ISSN 1756-8277

Wakale, Anil Bhurao and Banerjee, S. and Banerjee, Raja (2020) Estimation of NOx and soot emission from a constant volume n-butanol/n-dodecane blended spray using unsteady flamelet model based on n-dodecane/n-butanol/NOx/PAH chemistry. Journal of the Energy Institute, 93 (5). pp. 1868-1882. ISSN 17439671

Book Section

Kale, Rakesh and Banerjee, Raja (2018) Spray Collapse in a Multi-hole GDI Injector and Its Effect on In-Cylinder Combustion. In: Two-Phase Flow for Automotive and Power Generation Sectors. Springer Nature, pp. 43-61.

Conference or Workshop Item

Banerjee, Krishnarjun and Asthana, Saket (2020) The effect of cation-size variance on the relaxor nature and insulating character of the lead free Rb substituted Na0.5Bi0.5TiO3. In: AIP Conference Proceedings, 19-21 December 2019.

Golla, Siva Teja and Balide, Venkatesham and Banerjee, Raja (2018) Experimental study on the effect of vertical baffles on liquid sloshing noise in a partially filled rectangular tank under periodic excitation. In: 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, 26-29 August 2018, Chicago; United States.

Jha, Nandan Kumar and Saini, Rajat and Nag, Subhrajit and Mittal, Sparsh (2020) E2GC: Energy-efficient Group Convolution in Deep Neural Networks. In: Proceedings - 33rd International Conference on VLSI Design, VLSID 2020 - Held concurrently with 19th International Conference on Embedded Systems, 4 January -8 January 2020.

Kumar, Abhinav and Asthana, Saket (2021) Beneficial modification of the electrical properties of ecofriendly ferroelectric ceramic Na0.5Bi0.5TiO3 by substitution of low concentration of Ho+3. In: International Conference on Recent Advances in Materials and Manufacturing, ICRAMM, 20-21 November 2020, Tamilnadu; India.

This list was generated on Tue Dec 24 23:43:30 2024 IST.