Browse by IITH Authors

Shivaram, M. J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2022) Development and Characterization of Biomedical Porous Ti–20Nb–5Ag Alloy: Microstructure, Mechanical Properties, Surface Bioactivity and Cell Viability Studies. Metals and Materials International. ISSN 1598-9623

Jadhav, Mahesh and Singh, Sheela and Panigrahi, Bharat Bhooshan and et al, . (2022) Effect of minute element addition on the oxidation resistance of FeCoCrNiAl and FeCoCrNi2Al high entropy alloy. Advanced Powder Technology, 33 (2). pp. 1-13. ISSN 0921-8831

Aamani, S. and Das, C. R. and Martha, Surendra Kumar and Albert, S. K. and Panigrahi, Bharat Bhooshan (2022) Influence of Nitrogen on Grain Size-Dependent Sensitisation and Corrosion Resistance of 316L (N) Austenitic Stainless Steels. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Chandrakant, . and Reddy, N.S. and Panigrahi, Bharat B. (2021) Electro spark coating of AlCoCrFeNi high entropy alloy on AISI410 stainless steel. Materials Letters, 304 (130580). ISSN 0167577X

Mane, R.B. and Panigrahi, B.B. and et al, . (2021) Doping-induced coloration in titania. Journal of the American Ceramic Society, 104 (7). pp. 2932-2936. ISSN 00027820

Premasudha, Mookala and Bhumi Reddy, Srinivasulu Reddy and Lee, Yeon‐Ju and Panigrahi, Bharat B. and Cho, Kwon‐Koo and Nagireddy Gari, Subba Reddy (2021) Using artificial neural networks to model and interpret electrospun polysaccharide (Hylon VII starch) nanofiber diameter. Journal of Applied Polymer Science, 138 (11). p. 50014. ISSN 0021-8995

Lee, Sedong and Narayana, P.L. and Seok, Bang Won and Panigrahi, B.B. and Lim, Su-Gun and S. Reddy, N. (2021) Quantitative estimation of corrosion rate in 3C steels under seawater environment. Journal of Materials Research and Technology, 11. pp. 681-686. ISSN 22387854

Lee, Sedong and Narayana, P.L. and Seok, Bang Won and Panigrahi, B.B. and Lim, Su-Gun and Reddy, N.S. (2021) Corrigendum to “Quantitative estimation of corrosion rate in 3C steels under seawater environment” [J Mater Res Technol vol. 11 (March–April 2021) 681–686]. Journal of Materials Research and Technology, 12. p. 1844. ISSN 22387854

Mane, Rahul B. and Sahoo, Ramkrishna and Reddy, Bapathi Kumaar Swamy and Ravula, Vijay and Panigrahi, Bharat B. and Borse, Pramod H. and Chakravarty, Dibyendu (2021) Doping‐induced coloration in titania. Journal of the American Ceramic Society, 104 (7). pp. 2932-2936. ISSN 0002-7820

Aamani, S. and Das, C.R. and Martha, Surendra K. and Panigrahi, Bharat B. (2021) Effect of nitrogen on grain boundary character distribution in 316 stainless steel. Materials Letters, 288. p. 129387. ISSN 0167577X

Nasani, Narendar and Shakel, Zinaida and Loureiro, Francisco J.A. and Panigrahi, Bharat Bhooshan and Kale, Bharat B. and Fagg, Duncan P. (2021) Exploring the impact of sintering additives on the densification and conductivity of BaCe0.3Zr0.55Y0.15O3-δ electrolyte for protonic ceramic fuel cells. Journal of Alloys and Compounds, 862. p. 158640. ISSN 0925-8388

Mane, Rahul B. and Vijay, R. and Panigrahi, Bharat B. and Chakravarty, D. (2021) High temperature decomposition kinetics of Ti3GeC2 MAX phase. Materials Letters, 282. p. 128853. ISSN 0167577X

Sahane, Disna and Singh, Sheela and Jadhav, Mahesh and Panigrahi, Bharat B. (2021) Isothermal and non-isothermal sintering characteristics of mechanically alloyed nonequiatomic Fe2CoCrMnNi high-entropy alloy powder. Powder Metallurgy, 64 (1). pp. 64-74. ISSN 0032-5899

Reddy, B.S. and In, Kim Hong and Panigrahi, Bharat B. and Paturi, Uma Maheswera Reddy and Cho, K.K. and Reddy, N.S. (2021) Modeling tensile strength and suture retention of polycaprolactone electrospun nanofibrous scaffolds by artificial neural networks. Materials Today Communications, 26. p. 102115. ISSN 23524928

Murthy, S.S.N. and Patel, Manish and Reddy, T. Sreekantha and Prasad, V.V. Bhanu and Panigrahi, Bharat B. (2021) Processing and characterization of carbon fibres reinforced ZrB2 ultra high temperature ceramic matrix composite. Ceramics International. ISSN 02728842

Shivaram, M.J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2020) Role of porosity on electrochemical corrosion behavior of porous Ti-20Nb-5Ag alloy in simulated body fluid. Materials Today: Proceedings, 33. pp. 5257-5261. ISSN 22147853

Reddy, Bhumi Reddy Srinivasulu and Premasudha, Mookala and Panigrahi, Bharat B. and Cho, Kwon‐Koo and Reddy, Nagireddy Gari Subba (2020) Modeling constituent–property relationship of polyvinylchloride composites by neural networks. Polymer Composites, 41 (8). pp. 3208-3217. ISSN 0272-8397

Shivaram, M J and Arya, Shashi Bhushan and Panigrahi, Bharat Bhooshan and et al, . (2020) Electrochemical Corrosion and Impedance Studies of Porous Ti–xNb–Ag Alloy in Physiological Solution. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Godbole, Kirtiratan and Das, C R and Panigrahi, Bharat Bhooshan and et al, . (2020) Grain boundary engineering to overcome temper embrittlement in martensitic steel. Materials Letters. ISSN 0167-577X (In Press)

Godbole, Kirtiratan and Das, C. R. and Joardar, J. and Albert, S. K. and Ramji, M. and Panigrahi, Bharat B. (2020) Toughening of AISI 410 Stainless Steel Through Quenching and Partitioning and Effect of Prolonged Aging on Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 51 (7). pp. 3377-3383. ISSN 1073-5623

Davis, Deepak and Marappan, Gobinath and Sivalingam, Yuvaraj and Panigrahi, Bharat B. and Singh, Sheela (2020) Tribological Behavior of NiMoAl-Based Self-Lubricating Composites. ACS Omega, 5 (24). pp. 14669-14678. ISSN 2470-1343

Davis, Deepak and Shah, A Farhaan and Panigrahi, Bharat Bhooshan and Singh, Sheela (2019) Effect of Cr2AlC nanolamella addition on tribological properties of 5W-30 engine oil. Applied Surface Science. ISSN 01694332

Chandrakant, Chandrakant and Panigrahi, Bharat Bhooshan (2019) Electro-Spark Coating of High Entropy Alloys on AISI 410 Stainless Steel Substrates to Improve the Surface Properties and Wear Resistance. Masters thesis, Indian institute of technology Hyderabad.

Roopavath, Uday Kiran and Sah, Mahesh Kumar and Panigrahi, Bharat Bhooshan and Rath, Subha Narayan (2019) Mechanochemically synthesized phase stable and biocompatible β-tricalcium phosphate from avian eggshell for the development of tissue ingrowth system. Ceramics International. ISSN 0272-8842 (In Press)

Rohila, Sahil and Mane, Rahul B and Ummethala, Govind and Panigrahi, Bharat Bhooshan (2019) Nearly full-density pressureless sintering of AlCoCrFeNi-based high-entropy alloy powders. Journal of Materials Research. pp. 1-10. ISSN 0884-2914

Mane, Rahul B. and Ampolu, Haribabu and Panigrahi, Bharat Bhooshan and et al, . (2019) Oxidation kinetics of Ti3GeC2 MAX phase. Corrosion Science, 151. pp. 81-86. ISSN 0010938X

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2019) Sintering Mechanisms of Mechanically Alloyed High Entropy Alloy Powders. PhD thesis, Indian institute of technology Hyderabad.

Rohila, Sahil and Mane, Rahul B and Panigrahi, Bharat Bhooshan and et al, . (2019) Viscous flow assisted sintering of AlCoCrFeNi high entropy alloy powder. Materials Letters, 256. p. 126668. ISSN 0167577X

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Comparative study on sintering kinetics of as-milled and annealed CoCrFeNi high entropy alloy powders. Materials Chemistry and Physics, 210. pp. 49-56. ISSN 0254-0584

Panigrahi, Bharat Bhooshan and Srivastava, Meenu and Malathi, M. and et al, . (2018) Effect of Cr 2 AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Applied Surface Science, 449. pp. 295-303. ISSN 01694332

D, Davis and M, Srivastava and M, Malathi and Panigrahi, Bharat Bhooshan and Singh, S (2018) Effect of Cr2AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Applied Surface Science. ISSN 0169-4332 (In Press)

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Effect of alloying order on non-isothermal sintering kinetics of mechanically alloyed high entropy alloy powders. Materials Letters, 217. pp. 131-134. ISSN 0167-577X

Mane, Rahul B and Y, Rajkumar and Panigrahi, Bharat Bhooshan (2018) Sintering mechanism of CoCrFeMnNi high-entropy alloy powders. Powder Metallurgy, 61 (2). pp. 131-138. ISSN 0032-5899

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Sintering mechanisms of mechanically alloyed CoCrFeNi high-entropy alloy powders. Journal of Materials Research. pp. 1-9. ISSN 0884-2914 (In Press)

Mane, Rahul B and Haribabu, Ampolu and Panigrahi, Bharat Bhooshan (2018) Synthesis and sintering of Ti3GeC2 MAX phase powders. Ceramics International, 44 (1). pp. 890-893. ISSN 02728842

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2017) GRAIN BOUNDARY SLIDING ASSISTED DENSIFICATION DURING INITIAL SINTERING STAGE OF MECHANICALLY ALLOYED CoFeNi POWDERS. TRANSACTIONS OF POWDER METALLURGY ASSOCIATION OF INDIA, 43 (1). pp. 13-19.

Prasad, H and Singh, S and Panigrahi, Bharat Bhooshan (2017) Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy. Journal of Alloys and Compounds, 692. pp. 720-726. ISSN 0925-8388

Yembadi, R and Bapurao, R and Akash, P A and Panigrahi, Bharat Bhooshan (2017) Nonisothermal sintering of Cr2AlC powder. International Journal of Applied Ceramic Technology, 14 (1). pp. 63-67. ISSN 1546-542X

Rajkumar, Yembadi and Panigrahi, Bharat Bhooshan (2017) Thermodynamic assessments and mechanically activated synthesis of ultrafine Cr2AlC MAX phase powders. Advanced Powder Technology, 28 (3). pp. 732-739. ISSN 09218831

Rajkumar, Y and Aakash, P A and Bhattacharya, Saswata and Panigrahi, Bharat Bhooshan (2016) Mechanically Activated Synthesis of Nanocrystalline Cr2 AiC Powders. In: Transactions of Powder Metallurgy Association of India.

Y, Rajkumar and Panigrahi, Bharat Bhooshan (2016) Sintering Mechanisms of Ultrafine Cr2AlC MAX Phase Powder. Materials Today Communications, 8. pp. 46-52. ISSN 2352-4928 (In Press)

Reddy, N S and Panigrahi, Bharat Bhooshan and Ho, C M and Kim, J H and Lee, C S (2015) Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys. Computational Materials Science, 107. pp. 175-183. ISSN 0927-0256 (In Press)

Panigrahi, Bharat Bhooshan and Mane, R and Joshi, A and et al, . (2014) Densification of some MAX phases powders using sintering aids. In: World Congress on Powder Metallurgy and Particular Materials, 18-22 May 2014, Orlando, USA.

Reddy, N S and Panigrahi, Bharat Bhooshan and Krishnaiah, J (2013) Modeling mechanical properties of low carbon hot rolled steels. In: 7th International Conference on Bio-Inspired Computing: Theories and Applications, BIC-TA 2012, 14-16, December 2012, Gwalior, Madhya Pradesh; India.