Browse by IITH Authors
 | Up a level |
Article
Pandey, Ashok Kumar (2023) Hydrodynamic forces in non-uniform cantilever beam resonator. International Journal of Mechanical Sciences, 244. p. 108078. ISSN 0020-7403
Ranjan, Prabhat and Pandey, Ashok Kumar (2022) Effect of misaligned plates and varying interfacial area on bolted structures. International Journal of Mechanical Sciences, 233. pp. 1-12. ISSN 0020-7403
Shaju, Aashish and Pandey, Ashok Kumar (2022) Modelling transient response using PAC 2002-based tyre model. Vehicle System Dynamics, 60 (1). pp. 20-46. ISSN 0042-3114
Purohit, S and Swarnalatha, V and Pandey, Ashok Kumar and Sharma, R K and Pal, Prem (2022) Wet bulk micromachining characteristics of Si{110} in NaOH-based solution. Journal of Micromechanics and Microengineering, 32 (12). ISSN 0960-1317
Mamidi, Suresh and Pandey, Alok K. and Pathak, Anil D. and Rao, Tata N. and Sharma, Chandra S. (2021) Pencil lead powder as a cost-effective and high-performance graphite-silica composite anode for high performance lithium-ion batteries. Journal of Alloys and Compounds, 872 (159719). ISSN 09258388
Swami, A. and Pandey, A K and et al, . (2021) Experimental Study on Tire Contact Patch Characteristics for Vehicle Handling with Enhanced Optical Measuring System. SAE International Journal of Vehicle Dynamics, Stability, and NVH, 5 (3). pp. 333-350. ISSN 2380-2170
Pal, Prem and Swarnalatha, Veerla and Rao, Avvaru Venkata Narasimha and Pandey, Ashok Kumar and Tanaka, Hiroshi and Sato, Kazuo (2021) High speed silicon wet anisotropic etching for applications in bulk micromachining: a review. Micro and Nano Systems Letters, 9 (1). ISSN 2213-9621
Ranjan, Prabhat and Pandey, Ashok Kumar (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. p. 107071. ISSN 0301679X
Ranjan, P. and Pandey, A.K. (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. ISSN 0301679X
Ranjan, P. and Pandey, A.K. (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. ISSN 0301679X
Vamsi Krishna, G. and Viswanath, C. and Pandey, Ashok Kumar (2020) Performance of Bolted Joint Modelling Using Master Element. Lecture Notes in Mechanical Engineering. pp. 595-605. ISSN 2195-4356
Menon, P K and Ashok, Akarapu and Narasimha Rao, A V and Pandey, Ashok Kumar and Pal, Prem (2020) Effect of concentration change of 0.1% triton added 25 wt% TMAH during fabrication of deep cavities with mesa structures in SOI wafer. Microelectronic Engineering, 227. ISSN 111323
Swami, Aakash and Pandey, Ashok Kumar (2020) Vibration Analysis of a Tire Under Static Loading Using Flexible Ring-Based Model. Journal of Vibration and Acoustics, 143 (1). pp. 1-11. ISSN 1048-9002
Menon, P. Krishna and Ashok, Akarapu and Rao, A.V. Narasimha and Pandey, Ashok Kumar and Pal, Prem (2020) Effect of concentration change of 0.1% triton added 25 wt% TMAH during fabrication of deep cavities with mesa structures in SOI wafer. Microelectronic Engineering, 227. p. 111323. ISSN 01679317
Swarnalatha, Veerla and Vismaya, Kanneri Thettiyappath and Pal, Prem and et al, . (2020) Etching Mechanism Behind the High-Speed Etching of Silicon in NH<sub>2</sub>OH-added Alkaline Solutions. IEEJ Transactions on Sensors and Micromachines, 140 (1). pp. 24-30. ISSN 1341-8939
Akarapu, A and Pal, Prem and Pandey, Ashok Kumar and et al, . (2020) Experimental and Theoretical Analysis of Drag Forces in Micromechanical-Beam Arrays. Physical Review Applied, 13 (3). ISSN 2331-7019
Swarnalatha, Veerla and Pal, Prem and Pandey, Ashok Kumar and et al, . (2020) Systematic study of the etching characteristics of Si{111} in modified TMAH. Micro & Nano Letters, 15 (1). pp. 52-57. ISSN 1750-0443
Rao, Avvaru Venkata Narasimha and Pal, Prem and Pandey, Ashok Kumar and et al, . (2019) Aging Effects of KOH+NH2OH Solution on the Etching Characteristics of Silicon. ECS Journal of Solid State Science and Technology, 8 (11). P685-P692. ISSN 2162-8769
Ashok, Akarapu and Pandey, Ashok Kumar and Pal, Prem and et al, . (2019) Design and analysis of microcantilever beams based on arrow shape. Microsystem Technologies. ISSN 0946-7076
Ashok, Akarapu and Nighot, Rohit Prakash and Sahu, Nagesh Kumar and et al, . (2019) Design and analysis of microcantilever beams based on arrow shape. Microsystem Technologies. ISSN 0946-7076 (In Press)
Gangele, Aparna and Pandey, Ashok Kumar (2019) Frequency analysis of carbon and silicon nanosheet with surface effects. Applied Mathematical Modelling, 76. pp. 741-758. ISSN 0307904X
Gangele, Aparna and Akarapu, Ashok and Sharma, Chandra Shekhar and Pal, Prem and Pandey, Ashok Kumar (2019) Frequency analysis of hexagonal microbeam with 2D nanofiber mat. Materials Research Express. ISSN 2053-1591
Gangele, Aparna and Sharma, Chandra Shekhar and Pal, Prem and et al, . (2019) Frequency analysis of hexagonal microbeam with 2D nanofiber mat. Materials Research Express, 6 (8). 085631. ISSN 2053-1591
Akarapu, Ashok and P, Manoj Kumar and Singh, Sajal Sagar and P, Raju and Pal, Prem and Pandey, Ashok Kumar (2018) Achieving wideband micromechanical system using coupled non-uniform beams array. Sensors and Actuators A: Physical, 273. pp. 12-18. ISSN 0924-4247
Akarapu, Ashok and Gangele, Aparna and Pal, Prem and Pandey, Ashok Kumar (2018) An Analysis of Stepped Trapezoidal Shaped Microcantilever beams for MEMS based Devices. Journal of Micromechanics and Microengineering. ISSN 0960-1317
Ashok, Akarapu and Sahu, Nagesh Kumar and Pal, Prem and Pandey, Ashok Kumar (2018) Arrow Shaped Microcantilever Beams for Enhancing Mass Sensitivity. IEEE Sensors. pp. 1-4. ISSN 1930-0395
Pandey, Ashok Kumar and Swarnalatha, Veerla and Pal, Prem and et al, . (2018) Determination of precise crystallographic directions on Si{111} wafers using self-aligning pre-etched pattern. Micro and Nano Systems Letters, 6 (1). pp. 1-9. ISSN 2213-9621
Narasimha Rao, Avvaru Venkata and Swarnalatha, Veerla and Pandey, Ashok Kumar and Pal, Prem (2018) Determination of precise crystallographic directions on Si{111} wafers using self-aligning pre-etched pattern. Micro and Nano Systems Letters, 6 (1). ISSN 2213-9621
Rajagopal, Amirtham and Nair, Dipin K and Singh, Sajal Sagar (2018) Dynamic analysis of microbeams based on modified strain gradient theory using differential quadrature method. European Journal of Computational Mechanics, 27 (3). pp. 187-203. ISSN 1779-7179
Singh, Sajal Sagar and Nair, Dipin K and Rajagopal, Amirtham and et al, . (2018) Dynamic analysis of microbeams based on modified strain gradient theory using differential quadrature method. European Journal of Computational Mechanics, 27 (3). pp. 187-203. ISSN 1779-7179
Gangele, Aparna and Pandey, Ashok Kumar (2018) Elastic and fracture characteristics of graphene-silicon nanosheet composites using nonlinear finite element method. International Journal of Mechanical Sciences, 142. pp. 491-501. ISSN 0020-7403
Gangele, Aparna and Garala, S K and Pandey, Ashok Kumar (2018) Influence of Van der Waals Forces on Elastic and Buckling Characteristics of Vertically Aligned Carbon Nanotubes. International Journal of Mechanical Sciences. ISSN 0020-7403 (In Press)
Rao, Avvaru Venkata Narasimha and Swarnalatha, Veerla and Pandey, Ashok kumar and Pal, Prem (2018) Microstructures with Protected Convex Corners in Modified KOH Solution Exhibiting High-Speed Silicon Etching. IEEE Sensors. pp. 1-4. ISSN 1930-0395
Rajendra Gaikwad, Shantanu and Pandey, Ashok Kumar (2018) Nonlinear Analysis of Shape Memory Devices With Duffing and Quadratic Oscillators. Journal of Computational and Nonlinear Dynamics, 13 (1). 011003. ISSN 1555-1415
Sahoo, Debesh Kumar and Pandey, Ashok Kumar (2018) Performance of non-uniform cantilever based piezoelectric energy harvester. ISSS Journal of Micro and Smart Systems, 7 (1). pp. 1-13. ISSN 2509-7989
Ashok, Akarapu and P, Manoj Kumar and Pal, Prem and Pandey, Ashok Kumar (2018) An idea of oscillating alphabets through mechanical coupling. ISSS Journal of Micro and Smart Systems. pp. 1-6. ISSN 2509-7989
S, Bibin and Pandey, Ashok Kumar (2017) A Hybrid Approach to Model the Temperature Effect in Tire Forces and Moments. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (1). pp. 25-37. ISSN 1946-4002
Kambali, P N and Nikhil, V S and Pandey, Ashok Kumar (2017) Surface and nonlocal effects on response of linear and nonlinear NEMS devices. Applied Mathematical Modelling, 43. pp. 252-267. ISSN 0307-904X
Gangele, A and Sharma, Chandra Shekhar and Pandey, Ashok Kumar (2017) Synthesis of Patterned Vertically Aligned Carbon Nanotubes by PECVD Using Different Growth Techniques : A Review. Journal of Nanoscience and Nanotechnology, 17. pp. 1-18. ISSN 1533-4880 (In Press)
Singh, S S and Avvaru, V N and Veerla, S and Pandey, Ashok Kumar and Pal, Prem (2017) A measurement free pre-etched pattern to identify the <110> directions on Si{110} wafer. Microsystem Technologies, 23 (6). pp. 2131-2137. ISSN 0946-7076
Kambali, P N and Pandey, Ashok Kumar (2016) Capacitance and Force Computation Due to Direct and Fringing Effects in MEMS/NEMS Arrays. IEEE Sensors Journal, 16 (2). pp. 375-382. ISSN 1530-437X
Singh, S S and Pal, Prem and Pandey, Ashok Kumar and Xing, Y and Sato, K (2016) Determination of precise crystallographic directions for mask alignment in wet bulk micromachining for MEMS. Micro and Nano Systems Letters, 4 (5). pp. 1-29. ISSN 2213-9621
Kambali, P N and Swain, G and Pandey, Ashok Kumar (2016) Frequency Analysis of Linearly Coupled Modes of MEMS Arrays. Journal of Vibration and Acoustics, 138 (2). pp. 1-9. ISSN 1048-9002
Singh, S S and Pal, Prem and Pandey, Ashok Kumar (2016) Mass Sensitivity of Nonuniform Microcantilever Beams. Journal of Vibration and Acoustics, 138 (6). ISSN 1048-9002
Kambali, P N and Pandey, Ashok Kumar (2016) Nonlinear coupling of transverse modes of a fixed–fixed microbeam under direct and parametric excitation. Nonlinear Dynamics, 87 (2). pp. 1271-1294. ISSN 0924-090X
Singh, S G and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem (2016) Precise identification of < 1 0 0 > directions on Si{001} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317
Singh, S S and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem (2016) Precise identification of <1 0 0> directions on Si{0 0 1} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317
Vishwakarma, S D and Pandey, Ashok Kumar and Parpia, J M et. al. (2016) Size modulated transition in the fluid–structure interaction losses in nano mechanical beam resonators. Journal of Applied Physics, 119 (19). p. 194303. ISSN 0021-8979
Kambali, P N and Swain, G and Pandey, Ashok Kumar and Buks, E and Gottlieb, O (2015) Coupling and tuning of modal frequencies in direct current biased microelectromechanical systems arrays. Applied Physics Letters, 107 (063104). pp. 1-6. ISSN 0003-6951
Kambali, P N and Pandey, Ashok Kumar (2015) Nonlinear Response of a Microbeam Under Combined Direct and Fringing Field Excitation. Journal of Computational and Nonlinear Dynamics, 10 (5). ISSN 1555-1415
Singh, S S and Pal, Prem and Pandey, Ashok Kumar (2015) Pull-in analysis of non-uniform microcantilever beams under large deflection. Journal of Applied Physics, 118. pp. 1-10. ISSN 0021-8979
Vishwakarma, S D and Pandey, Ashok Kumar and Parpia, J M and Southworth, D R and Craighead, H G and Pratap, R (2014) Evaluation of mode dependent fluid damping in a high frequency drumhead microresonator. Journal of Microelectromechanical Systems, 23 (2). pp. 334-346. ISSN 1057-7157
Zaitsev, S and Pandey, Ashok Kumar and Shtempluck, O and Buks, E (2011) Forced and self-excited oscillations of an optomechanical cavity. Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 84 (4). pp. 1-10. ISSN 1539-3755
Conference or Workshop Item
Sibivivek, K. P. and Pandey, Ashok Kumar (2022) Dynamic Analysis of 3D Printed Polylactic Acid Bolted Joint Beams. In: Virtual Seminar on Applied Mechanics, VSAM 2021, 28 May 2021 through 29 May 2021, Virtual, Online.
Samanta, Sunrit and Pandey, Ashok Kumar (2022) Electromechanical Modelling of Ring Type of MEMS Gyroscopes. In: Virtual Seminar on Applied Mechanics, VSAM 2021, 28 May 2021 through 29 May 2021, Virtual, Online.
Ranjan, Prabhat and Pandey, Ashok Kumar (2022) Iwan Model for Bolted Joint with Residual Macroslip Stiffness and Pinning. In: 4th International and 19th National Conference on Machines and Mechanism, iNaCoMM 2019, 5 December 2019 through 7 December 2019, Mandi.
Purohit, Soumya and Pal, Prem and Pandey, Ashok Kumar (2021) Comparative study of perforated microcantilevers for MEMS applications. In: 2021 Symposium on Design, Test, Integration and Packaging of MEMS and MOEMS, DTIP 2021, 25 August 2021 through 27 August 2021, Paris.
Akarapu, Ashok and Sahu, Nagesh Kumar and Pal, Prem and Pandey, Ashok Kumar (2018) Arrow Shaped Microcantilever Beams for Enhancing Mass Sensitivity. In: IEEE SENSORS, 28-31 October 2018, New Delhi.
Pandey, Ashok Kumar and Gangele, Aparna (2017) Vibrational Characteristics of Functionally Graded Graphene-silicon Nanosheet Composites. In: Proceedings of the International Conference on Nanotechnology: Ideas, Innovations and Initiatives, 6-8 December 2017, IIT Roorkee, India.
Singh, Sajal Sagar and Pal, Prem and Pandey, Ashok Kumar (2016) Highly sensitive microelectromechanical mass sensor with non-uniform beams. In: 13th International workshop on nanomechanical sensing, 22-24 June 2016, Delft, The Netherlands.
Kambali, P N and Pandey, Ashok Kumar (2014) Electrostatic forces in fixed-fixed microbeams under direct and fringing field effects. In: IEEE 2nd International Conference on Emerging Electronics (ICEE), 3-6 Dec, 2014, Bengalore.
Gyanadutta, S and Pandey, Ashok Kumar (2013) Nonlinear response of coupled transverse modes of a Nanoresonator. In: 17th International Workshop on Physics of Semiconductor Devices IWPSD, 10-13 December 2013, Noida, India.
Garala, Sathish Kumar and Kambali, P N and Pandey, Ashok Kumar (2013) A hybrid approach for the modal analysis of graphene and carbon nanotubes. In: 17th IWPSD, 10-13 December 2013, Noida India.
Garala, Sathish Kumar and Godha, Sanskar and Pandey, Ashok Kumar (2011) Effect of Chirality on the Resonance Frequency of a Carbon Nanotube. In: Carbon Nanotube, 8-9 December 2011, Bangalore, India.
Thesis
Erravelly, Indrasena Reddy and Pandey, Ashok Kumar (2019) Frequency analysis of microbeams with axial pretension. Masters thesis, Indian institute of technology Hyderabad.
Pawar, Vishal and Pandey, Ashok Kumar (2019) Modeling and Analysis of Fabrication Defects in MEMS based Comb Actuators. Masters thesis, Indian institute of technology Hyderabad.
Gangele, Aparna and Pandey, Ashok Kumar (2019) Static and Dynamic Characteristics of Nano and Microstructures. PhD thesis, Indian institute of technology Hyderabad.
Nighot, Rohit Prakash and Pandey, Ashok Kumar (2018) Drag force computation in single and arrays of micromechanical beams with uniform and arrow shaped width. Masters thesis, Indian Institute of Technology Hyderabad.
Sahu, Nagesh Kumar and Pandey, Ashok Kumar (2018) Dynamic analysis of structure with bolted joint and identifying joint parameters. Masters thesis, Indian Institute of Technology Hyderabad.
Kambali, Prashant N and Pandey, Ashok Kumar (2016) Linear and Nonlinear Frequency Analysis of Single and Multibeam MEMS Arrays. PhD thesis, Indian Institute of Technology Hyderabad.
Garala, Sathish Kumar and Pandey, Ashok Kumar (2012) Analysis of Linear and Non-Linear Stress-Strain Properties for Graphene and Single Walled Carbon Nanotubes. Masters thesis, Indian Institute of Technology Hyderabad.
