Browse by IITH Authors

Murty, B S (2023) Designing a thermodynamically stable and intrinsically ductile refractory alloy. Journal of Alloys and Compounds, 939. p. 168597. ISSN 0925-8388

IIT, Hyderabad (2023) ఇఇటి పాఠం.. ఇక అందరికి. Eenadu, Greater Hyderabad.

Paremmal, P. and Karati, A. and Murty, B S and et al, . (2022) Effect of RF sputtering parameters on the nanoscratch properties of quinary Ti-Zr-Cu-Ni-Al thin film metallic glass. Journal of Alloys and Compounds, 908. pp. 1-12. ISSN 0925-8388

Lava Kumar, P. and Lombardi, A. and Murty, B S and et al, . (2022) Recent advances in aluminium matrix composites reinforced with graphene-based nanomaterial: A critical review. Progress in Materials Science, 128 (100948). pp. 1-95. ISSN 0079-6425

John, Rahul and Malladi, Sairam K and Murty, B S and et al, . (2022) Microstructural evolution and effect of heat treatment on the precipitation and mechanical behavior of Al0.7CoCrFeNi alloy. Journal of Alloys and Compounds, 904. pp. 1-12. ISSN 0925-8388

Karati, Anirudha and Ghosh, Sanyukta and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. Journal of Materials Engineering and Performance, 31 (1). pp. 305-317. ISSN 1059-9495

Kaushik, G. Nischay and Nagini, M. and Reddy, M. Surya Prakash and Hebalkar, Neha Y. and Vijay, R. and Murty, B S (2022) Effect of Zr and ZrO2 on aqueous corrosion behaviour of oxide dispersion strengthened 9Cr ferritic-martensitic steels. Materials Letters, 324. pp. 1-4. ISSN 0167-577X

John, Rahul and Dash, Manmath Kumar and Murty, B S and et al, . (2022) Effect of temperature and strain rate on the deformation behaviour and microstructure of Al0.7CoCrFeNi high entropy alloy. Materials Science and Engineering: A, 856. pp. 1-9. ISSN 0921-5093

Bhattacharya, Rahul and Annasamy, Murugesan and Murty, B S and et al, . (2022) Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline AlxCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys. Journal of Materials Research, 37 (4). pp. 959-975. ISSN 0884-2914

Trivedi, Vikrant and Tiadi, Minati and Murty, B S and et al, . (2022) Giant Thermoelectric Efficiency of Single-Filled Skutterudite Nanocomposites: Role of Interface Carrier Filtering. ACS Applied Materials & Interfaces, 14 (45). pp. 51084-51095. ISSN 1944-8244

Hariharan, V.S. and Pramod, S. and Murty, B S (2022) ICME framework to simulate microstructure evolution during laser powder bed fusion of Haynes 282 nickel-based superalloy. Journal of Materials Science, 57 (21). pp. 9693-9713. ISSN 0022-2461

Trivedi, Vikrant and Battabyal, Manjusha and Murty, B.S. and Gopalan, Raghavan (2022) Interfacial thermoelectric and mechanical properties of indigenously prepared Ni–Cr–Cu/Co4Sb12 skutterudite thermoelectric joints. Ceramics International. pp. 1-8. ISSN 0272-8842

Parida, Tripta and Karati, Anirudha and Murty, B S and et al, . (2022) Low temperature synthesis of multicomponent perovskite by mechanochemical route. Ceramics International, 48 (5). pp. 6385-6392. ISSN 0272-8842

Vikram, R. J. and Verma, S. K. and Dash, K. and Fabijanic, D. and Murty, B. S. and et al, . (2022) Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy. Metallurgical and Materials Transactions A. ISSN 1073-5623

Yebaji, Sushil and Saurav, Ayush and Chauhan, Pranjal and Murty, B S and et al, . (2022) Phase Stability of AlCoTiZn High-Entropy Alloy Prepared by Mechanical Alloying. Journal of Materials Engineering and Performance. ISSN 1059-9495

Kumar T., Sudeep and Sourav, Ayush and Murty, B.S. and et al, . (2022) Role of Al and Cr on cyclic oxidation behavior of AlCoCrFeNi2 high entropy alloy. Journal of Alloys and Compounds, 919. pp. 1-10. ISSN 0925-8388

Sabban, Rushikesh and Dash, K. and Suwas, S. and Murty, B S (2022) Strength–Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. Springer.

Karati, Anirudha and Mishra, Soumya Ranjan and Ghosh, Sanyukta and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Ramanujan, R.V. and Yadav, Satyesh Kumar and Murty, B S and et al, . (2022) Thermoelectric properties of a high entropy half-Heusler alloy processed by a fast powder metallurgy route. Journal of Alloys and Compounds, 924. pp. 1-12. ISSN 0925-8388

Karati, Anirudha and Ghosh, Sanyukta and Nagini, M. and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18. Journal of Alloys and Compounds, 927. pp. 1-9. ISSN 0925-8388

Meghwal, Ashok and Anupam, Ameey and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2022) Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating. Wear, 506-50. pp. 1-15. ISSN 0043-1648

Karati, A. et al. (2021) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. Journal of Materials Engineering and Performance, 31 (1). pp. 305-317. ISSN 10599495

Raman, L. and Murty, B S and et al, . (2021) Strengthening mechanisms in CrMoNbTiW refractory high entropy alloy. Materials Science and Engineering: A, 819 (141503). ISSN 09215093

Parakh, A. and Murty, B S and et al, . (2021) Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy. Journal of Alloys and Compounds, 863 (15805). ISSN 0925-8388

Trivedi, V. and Murty, B S and et al, . (2021) Effect of Refractory Tantalum Metal Filling on the Microstructure and Thermoelectric Properties of Co4Sb12Skutterudites. ACS Omega, 6 (5). pp. 3900-3909. ISSN 24701343

Ghosh, Sanyukta and Tippireddy, Sahil and Shankar, Gyan and Karati, Anirudha and Rogl, Gerda and Rogl, Peter and Bauer, Ernst and Malladi, Sai Rama Krishna and Murty, B S and et al, . (2021) InSb nanoparticles dispersion in Yb-filled Co4Sb12 improves the thermoelectric performance. Journal of Alloys and Compounds, 880. pp. 1-10. ISSN 0925-8388

Khond, Anuj and Adil, Shaik and Guruvidyathri, K. and Murty, B S and et al, . (2021) Kinetics and phase formation during crystallization of Hf64Cu18Ni18 amorphous alloy. Phase Transitions, 94 (2). pp. 110-121. ISSN 0141-1594

Meghwal, Ashok and Anupam, Ameey and Luzin, Vladimir and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2021) Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings. Journal of Alloys and Compounds, 854. pp. 1-20. ISSN 0925-8388

Arvindha Babu, D. and Majumdar, Bhaskar and Sarkar, R. and Murty, B S (2021) Phase Stability of Rapidly Solidified (Fe1−xNix)88Zr7B4Cu1 Ribbons. Metallurgical and Materials Transactions A, 52 (2). pp. 560-573. ISSN 1073-5623

Karthick, G. and Raman, Lavanya and Murty, B S (2021) Phase evolution and mechanical properties of novel nanocrystalline Y2(TiZrHfMoV)2O7 high entropy pyrochlore. Journal of Materials Science & Technology, 82. pp. 214-226. ISSN 1005-0302

Panda, J. P. and Arya, P. and Guruvidyathri, K. and Ravikirana, . and Murty, B S (2021) Studies on Kinetics of BCC to FCC Phase Transformation in AlCoCrFeNi Equiatomic High Entropy Alloy. Metallurgical and Materials Transactions A, 52 (5). pp. 1679-1688. ISSN 1073-5623

Murty, B S (2020) IIT-H faculty developing robo for Covid ward deployment. Telangana Today, Hyderabad.

Giri, Jyotsnendu and Murty, B S (2020) IIT-H provides sanitisers for the masses. The Hindu, Hyderabad.

Murty, B S (2020) Startup at IIT-Hyderabad develops low-cost portable ventilator. The New Indian Express, Hyderabad.

Murty, B S and Eswaran, Vinayak (2020) ‘Bag valve masks’ pitched as alternatives to ventilators. The Hindu, Hyderabad.

Murty, B S and Eswaran, Vinayak (2020) COVID-19: IIT-H suggests cheaper alternative to ventilators. Economic Times, Hyderabad.

Murty, B S and Eswaran, Vinayak (2020) Covid-19: Shortage of ventilators; IIT team pitches Bag Valve Mask as alternative. India Today, Hyderabad.

Murty, B S and Eswaran, Vinayak (2020) IIT-Hyderabad proposes ‘Ambu Bags’ to offset surge in demand for ventilators. The New Indian Express, Hyderabad.

Murty, B S and Eswaran, Vinayak (2020) IIT Hyderabad Director B.S Murty calls for adopting alternatives to Ventilators like ‘Bag Valve Mask. Edexlive, Hyderabad.

Murty, B S (2020) IIT Hyderabad director calls for alternatives to ventilators. Telangana Today, Hyderabad.

Murty, B S and Eswaran, Vinayak (2020) Why go for costly ventilators, asks IIT-H Director. The Hindu Businessline, Hyderabad.

Murty, B S and John, Renu (2020) IIT-Hyderabad incubated start-up develops IoT-enabled, low-cost ventilator. FinancialExpress, Hyderabad.

Murty, B S (2020) NMDC, IIT-H ink pact to handhold start-ups. The Hindu, Hyderabad.

Murty, B S (2020) IIT Hyderabad looking to expand tie-up with JICA. The Hans India, Hyderabad.

Murty, B S and Muddam, Prasad and Kolloju, Akitha (2020) IIT Hyderabad CfHE incubated startup among top 5 in BioAsia 2020. Telengana Today, Hyderabad.

Murty, B S and Rengan, Aravind Kumar and Sharma, Chandra Shekhar and Khandelwal, Mudrika (2020) IIT-H Director called upon the scholars to stick to fundamentals of research. Telengana Today, Hyderabad.

Dongari, Nishanth and Murty, B S (2020) IIT-H incubated startup launches high-speed electric scooter. Telengana Today, Hyderabad.

Murty, B S and Dongari, Nishanth (2020) PURE EV Launches High Speed Electric Scooter ‘EPluto 7G’. Techiexpert, Hyderabad.

Murty, B S (2020) IIT Hyderabad targets quadrupling research funding to Rs 200. Devdiscourse, Hyderabad.

Murty, B S and C, Krishna Mohan (2020) IIT-H to appoint 1 more counsellor in bid to reduce student stress. The Times of India, Hyderabad.

Murty, B S (2020) IIT Hyderabad targets research funding of Rs 200 crore a year by 2024. The Economic Times, Hyderabad.

Murty, B S (2020) IIT-Hyderabad set to help Telangana govt carry out research on AI. Deccan Chronicle, Hyderabad.

Shaikh, Sufyan M. and Hariharan, V.S. and Yadav, Satyesh K. and Murty, B S (2020) CALPHAD and rule-of-mixtures: A comparative study for refractory high entropy alloys. Intermetallics, 127. pp. 1-7. ISSN 0966-9795

Guruvidyathri, K. and Vaidya, Mayur and Murty, B S (2020) Challenges in design and development of high entropy alloys: A thermodynamic and kinetic perspective. Scripta Materialia, 188. pp. 37-43. ISSN 1359-6462

Singh, Sujata and Shaikh, Sufyan M. and Kumar M K, Punith and Murty, B S and Srivastava, Chandan (2020) Microstructural homogenization and substantial improvement in corrosion resistance of mechanically alloyed FeCoCrNiCu high entropy alloys by incorporation of carbon nanotubes. Materialia, 14. pp. 1-11. ISSN 25891529

Srivastav, Ajeet K. and Bandi, Suresh and Kumar, Abhishek and Murty, B S (2020) Microstructure evolution and densification during spark plasma sintering of nanocrystalline W-5wt.%Ta alloy. Philosophical Magazine Letters, 100 (9). pp. 442-451. ISSN 0950-0839

Muralikrishna, G. Mohan and Esther, A. Carmel Mary and Guruvidyathri, K. and Watermeyer, Philipp and Murty, B S (2020) Novel Multicomponent B2-Ordered Aluminides: Compositional Design, Synthesis, Characterization, and Thermal Stability. Metals, 10 (11). pp. 1-19. ISSN 2075-4701

Vaidya, M and Karati, Anirudha and Guruvidyathri, K. and Nagini, M. and Pradeep, K.G. and Murty, B S (2020) Suppression of σ-phase in nanocrystalline CoCrFeMnNiV high entropy alloy by unsolicited contamination during mechanical alloying and spark plasma sintering. Materials Chemistry and Physics, 255 (12355). pp. 1-9. ISSN 0254-0584

Meghwal, Ashok and Anupam, Ameey and Murty, B S and et al, . (2020) Thermal Spray High-Entropy Alloy Coatings: A Review. Journal of Thermal Spray Technology, 29 (5). pp. 1-37. ISSN 1059-9630

Nagini, M. and Pradeep, K.G. and Vijay, R. and Reddy, A.V. and Murty, B S and et al, . (2020) A combined electron microscopy, atom probe tomography and small angle X-ray scattering study of oxide dispersion strengthened 18Cr ferritic steel. Materials Characterization, 164. pp. 1-9. ISSN 1044-5803

Murty, B S (2019) IIT Hyderabad to collaborate with Center for Materials for Electronics Technology in e-waste recycling. Indian Education Diary.

Murty, B S (2019) IIT-H to develop affordable e-waste recycling techniques. The Hindu.

Murty, B S (2019) IIT-Hyderabad, C-MET ink pact on e-waste recycling. The Hindu Businessline.

Murty, B S (2019) నాణ్యమైన పరిశోధనలే లక్ష్యం. Eenadu, Hyderabad.

Murty, B S (2019) IIT Hyderabad teams up with four Japanese institutions on earthquake engineering. The Times of India, Hyderabad.

Murty, B S (2019) IIT Hyderabad to collaborate with four Japanese institutions on research in earthquake engineering. India Today, Hyderabad.

Murty, B S (2019) IIT-H Partners With Japanese Firm for Development of Li-ion Batteries. Saur Energy International, Hyderabad.