Browse by IITH Authors

Article

Dey, Suhash Ranjan (2023) Strategies to engineer FeCoNiCuZn high entropy alloy composition through aqueous electrochemical deposition. Electrochimica Acta, 453. p. 142350. ISSN 0013-4686

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Comprehensive Observations and Interpretations in Al-Rich Interstitial-Free High-Strength Steel via Process-Induced Structure Evolution. Journal of Materials Engineering and Performance. ISSN 1059-9495

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Fostering deep drawability through recrystallization texture strengthening in aluminum-rich interstitial free steel. Materials Characterization, 193. pp. 1-12. ISSN 1044-5803

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Klement, Uta and Dey, Suhash Ranjan (2022) Graphene Oxide Reinforced Magnetic FeCoNiCuZn High Entropy Alloy through Electrodeposition. Journal of The Electrochemical Society, 169 (2). 022501. ISSN 0013-4651

Pavithra, Chokkakula L.P. and Rengan, Aravind Kumar and Dey, Suhash Ranjan and et al, . (2022) Primary attempt towards bioapplicability of one-dimensional high entropy alloys. Materials Letters, 312. pp. 1-4. ISSN 0167-577X

Tamboli, Rameez R. and Dudala, Srinivas and Andersen, Dustin and Valle, Nathalie and Eswara, Santhana and Korla, Rajesh and Dey, Suhash Ranjan and et al, . (2022) Quantitative prediction of Al and learning grain boundary character in Al-rich interstitial free steel. Scripta Materialia, 219. pp. 1-5. ISSN 1359-6462

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Joardar, Joydip and Sarada, Bulusu V. and Tamboli, Rameez R. and Hu, Yixuan and Zhang, Yumeng and Wang, Xiaodong and Dey, Suhash Ranjan (2021) An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy alloy thin films. Scientific Reports, 11 (1). ISSN 2045-2322

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2021) Inkjet printed CuIn(1-X)GaXSe2 thin film by controlled selenium distribution for improved power conversion efficiency in chalcopyrite solar cells. Applied Surface Science Advances, 6. pp. 1-7. ISSN 2666-5239

Madhuri, K. and Kannan, P. K. and Yadav, Brijesh Singh and Chaudhari, Sushmita and Dhage, Sanjay R. and Dey, Suhash Ranjan (2021) Investigation on effects of precursor pre-heat treatments on CIGS formation using spin-coated CIG precursor. Journal of Materials Science: Materials in Electronics, 32 (2). pp. 1521-1527. ISSN 0957-4522

L. P. Pavithra, Chokkakula and Siri Kiran Janardhana, Reddy Kunda and Madhav Reddy, Kolan and Murapaka, Chandrasekhar and Wang, Xiaodong and Dey, Suhash Ranjan (2021) One-dimensional Co–Cu–Fe–Ni–Zn high-entropy alloy nanostructures. Materials Research Letters, 9 (7). pp. 285-290. ISSN 2166-3831

Chakraborty, Pritam K. and Azadmanjiri, Jalal and Pavithra, Chokkakula L. P. and Wang, Xiaojian and Masood, Syed H. and Dey, Suhash Ranjan and Wang, James (2020) Advancements in Therapeutics via 3D Printed Multifunctional Architectures from Dispersed 2D Nanomaterial Inks. Small, 16 (49). p. 2004900. ISSN 1613-6810

Dey, Suhash Ranjan and Kannan, P K and Chaudhari, Sushmita (2020) Effect of Anionic Substitution of S by Se in CZTSSe Films Prepared from Electron Beam Evaporation. Materials Today: Proceedings, 21 (4). pp. 1787-1792. ISSN 2214-7853

Madhuri, K and Kannan, P K and Dey, Suhash Ranjan and et al, . (2020) Effect of Annealing Time and Heat Flux on Solvothermal Synthesis of CIGS Nanoparticles. Materials Today: Proceedings, 21 (4). pp. 1882-1887. ISSN 2214-7853

Yadav, Brijesh Singh and Koppoju, Suresh and Dey, Suhash Ranjan and et al, . (2020) Microstructural investigation of inkjet printed Cu(In,Ga)Se2 thin film solar cell with improved efficiency. Journal of Alloys and Compounds, 827. ISSN 0925-8388

Karre, Rajamallu and Kodli, Basanth Kumar and Rajendran, Archana and J, Nivedhitha and Pattanayak, Deepak K and Ameyama, Kei and Dey, Suhash Ranjan (2019) Comparative study on Ti-Nb binary alloys fabricated through spark plasma sintering and conventional P/M routes for biomedical application. Materials Science and Engineering: C, 94. pp. 619-627. ISSN 0928-4931

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R (2019) Effective ink-jet printing of aqueous ink for Cu (In, Ga) Se2 thin film absorber for solar cell application. Solar Energy, 179. pp. 363-370. ISSN 0038-092X

Pavithra, C L P and Janardhan, R K S K and Ummethala, Govind and M, Chandrasekhar and Malladi, Sairam K and Dey, Suhash Ranjan (2019) An Electrochemical Approach for Development of Novel Magnetic Multicomponent Alloy Thin Films for Sensor Applications. The Electrochemical Society.

Ndione, Paul F and Ratcliff, Erin L and Dey, Suhash Ranjan et. al. (2019) High-Throughput Experimental Study of Wurtzite Mn1–xZnxO Alloys for Water Splitting Applications. ACS Omega, 4 (4). pp. 7436-7447. ISSN 2470-1343

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2019) Impact of sulphurization environment on formation of $$\hbox {Cu}_{2}\hbox {ZnSnS}_{4}$$ Cu 2 ZnSnS 4 films using electron beam evaporated stacked metallic precursors. Bulletin of Materials Science, 42 (1). ISSN 0250-4707

Mandati, S and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, V S (2019) Two-dimensional CuIn1− xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Journal of Magnetism and Magnetic Materials, 181. pp. 396-404. ISSN 0304-8853

Dey, Suhash Ranjan and Mandati, Sreekanth (2019) Two-dimensional CuIn1−xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Solar Energy, 181. pp. 396-404. ISSN 0038092X

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V. and et al, . (2019) Two-dimensional CuIn1−xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Solar Energy, 181. pp. 396-404. ISSN 0038092X

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, Sarada V (2018) Cu(In,Ga)Se2 Films with Branched Nanorod Architectures Fabricated by Economic and Environmentally Friendly Pulse-Reverse Electrodeposition Route. ACS Sustainable Chemistry & Engineering, 6 (11). pp. 13787-13796. ISSN 2168-0485

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Detailed investigations on influence of precursor stacking and sulfurization for Cu 2 ZnSnS 4 film formation. Thin Solid Films. ISSN 0040-6090 (In Press)

Meshram, Manish P and Tamboli, Rameez Rajmahammad and Kodli, Basanth Kumar and Yebaji, Sushil Gyanoba and Dey, Suhash Ranjan (2018) Texture analyses of friction stir welded austenitic stainless steel AISI-316L. Advances in Materials and Processing Technologies, 4 (2). pp. 244-254. ISSN 2374-068X

Sharma, R K and Chouryal, Y N and Chaudhari, S and Saravanakumar, J and Dey, Suhash Ranjan and Ghosh, P (2017) Adsorption-Driven Catalytic and Photocatalytic Activity of Phase Tuned In2S3 Nanocrystals Synthesized via Ionic Liquids. ACS Applied Materials and Interfaces, 9 (13). pp. 11651-11661. ISSN 1944-8244

Kodli, Basanth Kumar and Karre, Rajamallu and Saxena, Kuldeep K and Pancholi, Vivek and Dey, Suhash Ranjan and Bhattacharjee, Amit (2017) Flow behaviour of TiHy 600 alloy under hot deformation using gleeble 3800. Advances in Materials and Processing Technologies, 3 (4). pp. 490-510. ISSN 2374-068X

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2017) Influence of stabilizing agent on dip coating of Cu 2 ZnSnS 4 thin film. Thin Solid Films, 636. pp. 144-149. ISSN 0040-6090

Palli, Srinivas and Dey, Suhash Ranjan (2017) Numerical simulation and experimental investigation of combinatorial electrodeposition of Ni-Cu material library using modified Hull cell. Physica Status Solidi (a), 214 (10). p. 1700084. ISSN 1862-6300

Basanth Kumar, K and Saxena, Kuldeep K and Dey, Suhash Ranjan and Pancholi, Vivek and Bhattacharjee, Amit (2017) Peak stress studies of hot compressed TiHy 600 alloy. Materials Today: Proceedings, 4 (8). pp. 7365-7374. ISSN 2214-7853

Rajamallu, Karre and Niranjan, Manish K and Kei, Ameyama and Dey, Suhash Ranjan (2017) Phase stability and elastic properties of β Ti-Nb-X (X=Zr, Sn) alloys: An ab-initio density functional study. Modelling and Simulation in Materials Science and Engineering. ISSN 0965-0393 (In Press)

Kumar, K B and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2017) Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600). Journal of Alloys and Compounds, 691. pp. 906-903. ISSN 0925-8388

Palli, Srinivas and Dey, Suhash Ranjan (2017) Thermal stability of pulse electroplated gold films: SEM-EBSD studies. Advanced Material Science, 2 (1). ISSN 23986883

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Investigation of optimum annealing parameters for formation of dip coated Cu2ZnSnS4 thin film. Thin Solid Films, 612. pp. 456-462. ISSN 0040-6090

Kumar, Basant and Dey, Suhash Ranjan and Saxena, Kuldeep K et. al (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science. ISSN 0974-1267

Chaudhari, S and Palli, S and Kannan, P K and Dey, Suhash Ranjan (2016) Pulsed electrodeposition of Cu2ZnSnS4 absorber layer precursor for photovoltaic application. Thin Solid Films, 600. pp. 169-174. ISSN 0040-6090

Palli, S and Dey, Suhash Ranjan (2016) Theoretical and Experimental Study of Copper Electrodeposition in a Modified Hull Cell. International Journal of Electrochemistry, 2016 (348240). pp. 1-13. ISSN 2090-3529

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition. Journal of Power Sources, 273. pp. 149-157. ISSN 0378-7753

Karre, Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan (2015) Development of β Ti-xNb alloys through firstprinciples DFT analysis and P/M route for orthopedic implants. Transactions of PMAI, 41 (2). pp. 51-54. ISSN 0377-9416

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Enhanced photoresponse of Cu(In,Ga)Se2 /CdS heterojunction fabricated using economical non-vacuum methods. Electronic Materials Letters, 11 (4). pp. 618-624. ISSN 2093-6788

Palli, S and Hamann, S and Wambach, M and Ludwig, A and Dey, Suhash Ranjan (2015) Fabrication of a Ni-Cu Thin Film Material Library Using Pulsed Electrodeposition. Journal of The Electrochemical Society, 161 (10). D504-D509. ISSN 0013-4651

Karre, R and Niranjan, M K and Dey, Suhash Ranjan (2015) First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications. Materials Science and Engineering: C, 50. pp. 52-58. ISSN 0928-4931

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2014) CuIn1-xGaxSe2 thin-film absorber layers for solar photovoltaics fabricated by two-stage pulsed current electrodeposition. Materials Letters, 118 (1). pp. 158-160. ISSN 0167-577X

Manish, P M and Basanth Kumar, K and Dey, Suhash Ranjan (2014) Friction Stir Welding of Austenitic Stainless Steel by PCBN Tool and its Joint Analyses. International Conference on Materials Manufacturing ICMPC.

Dey, Suhash Ranjan and Meshram, M P and Basanth Kumar, K (2014) Mechanical properties and microstructural characterization of friction stir welded aIsI 316 austenitic stainless steel. International conference on advances in Manufacturing and Materials engineering.

Srinivas, P. and Hamann, Sven and Dey, Suhash Ranjan (2013) Development of Ni–Cu Materials Library by Using Combinatorial Pulsed Electrodeposition. Transactions of the Indian Institute of Metals, 66 (4). pp. 429-432. ISSN 0972-2815

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Improved Photoelectrochemical Performance Of Cu(In,Ga)Se2 Thin Films Prepared By Pulsed Electrodeposition. Journal of Renewable and Sustainable Energy, 5. 031602. ISSN 1941-7012

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Pulsed electrodeposition of Cuinse2 thin films with morphology for solar cell applications. Journal of The Electrochemical Society, 160 (4). D173-D177. ISSN 0013-4651

Dey, Suhash Ranjan and Hollang, L and Beausir, B and Hieckmann, E and Skrotzki, W (2013) Reprint of: Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials, 67. pp. 53-58. ISSN 0167-6636

Dey, Suhash Ranjan and Hollang, L and Beausir, B and et al, . (2013) Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials.

Pfetzing-Micklich, J and Brinckmann, S and Dey, Suhash Ranjan and Otto, F and Hartmaier, A and Eggeler, G (2011) Micro-shear deformation of pure copper. Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 219-223. ISSN 0933-5137

Book Section

Kannan, P.K. and Chaudhari, Sushmita and Dey, Suhash Ranjan and et al, . (2022) Progress in Development of CZTS for Solar Photovoltaics Applications. In: Encyclopedia of Smart Materials. Elsevier, pp. 681-698. ISBN 978-012815733-6, 978-012815732-9

Karre, Rajamallu and Dey, Suhash Ranjan (2021) Progress in Development of Beta Titanium Alloys for Biomedical Applications. In: Encyclopedia of Smart Materials. Elsevier, pp. 512-527.

Conference or Workshop Item

Chaudhari, Sushmita and Kannan, P K and Dey, Suhash Ranjan (2019) Effect of Annealing Atmosphere and Stabilizing Agent on the Formation of CZTS Film Using a Simple Dip Coating Technique. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2019) Role of selenium content in selenization of inkjet printed CIGSe2 thin film solar cell. In: 3rd International Conference on Optoelectronic and Nano Materials for Advanced Technology, icONMAT, 3-5 January 2019, Kerala, India.

Kumar K, Basanth and Karre, Rajamallu and Dey, Suhash Ranjan (2016) Correlation Between Processing Map Domains and Microstructure of 50% Hot Compressed IMI 834 Ti Alloy. In: Proceedings of the 13th World Conference on Titanium, San Diego, USA.

Kesavan, P K Pidugu and Chaudhari, Sushmita and Dey, Suhash Ranjan (2016) Effects of Stacking Sequences in the Formation of CZTS Thin Film Using Electron Beam Evaporation. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Effects of triethanolamine on the formation of CZTS films using a simple dip coating technique. In: IEEE 43rdPhotovoltaic Specialists Conference (PVSC), 5-10 June 2016.

K., Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan and et al, . (2016) Fabrication of Biocompatible Ti-Nb-Sn Through Powder Metallurgy Route for Orthopedic Implants. In: 13th World Conference Titanium, 2015, San Diego, USA.

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2015) Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000°C with different strain rates. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan (2014) Flow behaviour of IMI 834 titanium alloy under hot deformation using Gleeble 3800. In: 4th Gleeble User Workshop India (GUWI), 2014, Madras, India.

Srinivas, P. and Dey, Suhash Ranjan (2013) Combinatorial pulsed electrodeposition of binary Ni-Cu alloys. In: Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry , ELAC-2013, 2013, Hyderabad, India.

Rajamallu, Karre and Niranjan, Manish K and Dey, Suhash Ranjan (2013) Concept of designing novel beta-titanium alloys using first-principles calculations. In: International Conference on Advances in Chemical Engineering ACE2013, January 2013, Roorkee, India.

Sajan, Sajin G and Meshram, Manish and Dey, Suhash Ranjan and et al, . (2013) Friction Stir Welding of Aluminum 6082 with Mild Steel and its Joint Analyses. In: 2nd Annual International Conference on Materials Processing and Characterization, 2013, Hyderabad, India.

Mandati, S and Sarada, B V and Dey, Suhash Ranjan and et al, . (2013) Pulse Electrodeposition and Characterization of CIGS thin-films for Solar Cells Applications. In: Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry , ELAC-2013, January, 2013, Hyderabad, India.

Thesis

Dinesh, Dinesh and Dey, Suhash Ranjan (2019) Dip Coating of Cu2ZnSnS4 on Flexible Mo foil and its Flexibility measurements. Masters thesis, Indian institute of technology Hyderabad.

K, Rajamallu and Dey, Suhash Ranjan (2018) Design and Development of β Ti Alloys Through First Principles Calculations and Powder Metallurgy Route for Biomedical Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Dip coating of Cu2ZnSn(SxSe1-x)4 Absorber Layer for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Kumar, Harendra and Dey, Suhash Ranjan (2018) Effects of Ball Milling on β(Beta) Titanium Alloys for Biomedical Applications. Masters thesis, Indian Institute of Technology Hyderabad.

K, Basanth Kumar and Dey, Suhash Ranjan (2018) Thermomechanical Processing, Microstructure and Texture Studies of TiHy 600 Alloy (a Near Alpha Titanium Alloy). PhD thesis, Indian institute of technology Hyderabad.

Pankaj, Pankaj and Dey, Suhash Ranjan (2012) Friction Stir Welding (FSW) Studies of Dissimilar Al-Based Alloys Using Different Pin Profiles. Masters thesis, Indian Institute of Technology Hyderabad.

Sajan, S G and Dey, Suhash Ranjan (2012) Friction Stir Welding of Aluminum 6082 with Mild Steel and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

Other

Dhanabal, Rengasamy and Dey, Suhash Ranjan (2022) Perovskite solar cells: recent progress and strategies developed for minimizing interfacial recombination. Higher Education Press Limited Company.