Items where Division is "Department of Chemical Engineering" and Year is 2014

Article

A, Rakesh and V T S R, Kumar Reddy and Mangadody, Narasimha (2014) Air-core size measurement of operating hydrocyclone by electrical resistance tomography. Chemical Engineering and Technology, 37 (5). pp. 795-805. ISSN 0930-7516

Appari, S and Janardhanan, V and Bauri, R and Jayanti, S (2014) Deactivation and regeneration of Ni catalyst during steam reforming of model biogas: An experimental investigation. International Journal of Hydrogen Energy, 39 (1). pp. 297-304. ISSN 0360-3199

Appari, S and Janardhanan, V and Bauri, R and Jayanti, S and Deutschmann, O (2014) A detailed kinetic model for biogas steam reforming on Ni and catalyst deactivation due to sulfur poisoning. Applied Catalysis A: General, 471. pp. 118-125. ISSN 0926-860X

Bordoloi, Ankur and Shee, Debaprasad (2014) Synthesis of Porous Vanadia-Titania Catalyst for Oxidative Dehydrogenation of Propane. Advanced Porous Materials, 2 (4). pp. 230-236. ISSN 23273941

Ghosh, S and R, Usha and Sahu, K C (2014) Double-diffusive two-fluid flow in a slippery channel: A linear stability analysis. Physics of Fluids, 26 (12). 127101-1-127101-23. ISSN 1070-6631

Ghosh, S and Usha, R and Sahu, K C (2014) Linear stability analysis of miscible two-fluid flow in a channel with velocity slip at the walls. Physics of Fluids, 26 (014107). pp. 1-21. ISSN 1070-6631

Giri, Lopamudra and Patel, Anilkumar K. and Karunarathne, W.K. Ajith and et al, . (2014) A G-Protein Subunit Translocation Embedded Network Motif Underlies GPCR Regulation of Calcium Oscillations. Biophysical Journal, 107 (1). pp. 242-254. ISSN 00063495

Goel, H and Chandran, P R and Mitra, Kishalay and Majumdar, Saptarshi and Ray, P (2014) Estimation of interfacial tension for immiscible and partially miscible liquid systems by Dissipative Particle Dynamics. Chemical Physics Letters, 600. pp. 62-67. ISSN 0009-2614

Govindarajan, R and Sahu, K C (2014) Instabilities in viscosity-stratified flow. Annual Review of Fluid Mechanics, 46. pp. 331-353. ISSN 0066-4189

Hardjo, E F and Monder, D S and Karan, K (2014) An Effective Property Model for Infiltrated Electrodes in Solid Oxide Fuel Cells. Journal of The Electrochemical Society, 161 (1). F83-F93. ISSN 0013-4651

Haridas, A K and Sharma, Chandra Shekhar and Rao, T N (2014) Electrochemical performance of lithium titanate submicron rods synthesized by Sol-Gel/electrospinning. Electroanalysis, 26 (11). pp. 2315-2319. ISSN 1040-0397

Haridas, A K and Sharma, Chandra Shekhar and V, Sritharan and Rao, T N (2014) Fabrication and surface functionalization of electrospun polystyrene submicron fibers with controllable surface roughness. RSC Advances (4). pp. 12188-12197. ISSN 2046-2069

Haridas, Anulekha K. and Sharma, Chandra Shekhar and Rao, Tata N. (2014) Electrochemical Performance of Lithium Titanate Submicron Rods Synthesized by Sol-Gel/Electrospinning. Electroanalysis, 26 (11). pp. 2315-2319. ISSN 10400397

Jampana, Phanindra Varma and Shah, S L and Shaw, J (2014) A region growing method for detecting interfaces in X-ray view cell images. IEEE Sensors Journal, 14 (7). pp. 2283-2292. ISSN 1530-437X

Janardhanan, V and Monder, D S (2014) Sulfur Poisoning of SOFCs: A Model Based Explanation of Polarization Dependent Extent of Poisoning. Journal of The Electrochemical Society, 161 (14). F1427-F1436. ISSN 0013-4651

Kakunuri, M and Sharma, Chandra Shekhar (2014) Photoresist Derived Carbon Films as High Capacity Anodes for Lithium Ion Battery. ECS Transactions, 61 (7). pp. 37-43. ISSN 1938-5862

Karapetsas, G and Sahu, K C and Sefiane, K and Matar, O K (2014) Thermocapillary-driven motion of a sessile drop: Effect of non-monotonic dependence of surface tension on temperature. Langmuir, 30 (15). pp. 4310-4321. ISSN 0743-7463

Kumar, P and Yenumala, S R and Maity, S K and Shee, D (2014) Kinetics of hydrodeoxygenation of stearic acid using supported nickel catalysts: Effects of supports. Applied Catalysis A: General, 471. pp. 28-38. ISSN 0926-860X

Kusuma, J N and Matar, O K and Sahu, K C (2014) Numerical simulations of miscible channel flow with chemical reactions. Current Science, 106 (6). pp. 841-852. ISSN 0011-3891

Lakhete, P and Janardhanan, V (2014) Modeling process intensified catalytic plate reactor for synthesis gas production. Chemical Engineering Science, 110. pp. 13-19. ISSN 0009-2509

Mangadody, Narasimha and A N, Mainza and P N, Holtham and M S, Powell and M S, Brennan (2014) A semi-mechanistic model of hydrocyclones — Developed from industrial data and inputs from CFD. International Journal of Mineral Processing, 133. pp. 1-12. ISSN 0301-7516

Mattaparthi, S and Sharma, Chandra Shekhar (2014) Biomimicked high-aspect-ratio hierarchical superhydrophobic polymer surfaces. Bioinspired, Biomimetic and Nanobiomaterials, 3 (1). pp. 4-9. ISSN 2045-9858

Menon, V and Janardhanan, V and Deutschmann, O (2014) A mathematical model to analyze solid oxide electrolyzer cells (SOECs) for hydrogen production. Chemical Engineering Science, 110. pp. 83-93. ISSN 0009-2509

Mogilicharla, A and Majumdar, S and Mitra, K (2014) Modeling and optimization of propylene polymerization with branching. Computer Aided Chemical Engineering, 33. pp. 1435-1440. ISSN 1570-7946

Mogilicharla, A and Chugh, T and Majumdar, Saptarshi and Mitra, Kishalay (2014) Multi-objective optimization of bulk vinyl acetate polymerization with branching. Materials and Manufacturing Processes, 29 (2). pp. 210-217. ISSN 1042-6914

Mogilicharla, A and Mitra, Kishalay and Majumdar, Saptarshi (2014) Modeling of propylene polymerization with long chain branching. Chemical Engineering Journal, 246. pp. 175-183. ISSN 1385-8947

P P, Naidu and Mohan, Anand (2014) Importance of VIIIa Inactivation in a Mathematical Model for the Formation, Growth, and Lysis of Clots. Mathematical Modelling of Natural Phenomena, 9 (6). pp. 17-33. ISSN 0973-5348

Palla, V C S and Shee, Debaprasad and Maity, Sunil Kumar (2014) Kinetics of hydrodeoxygenation of octanol over supported nickel catalysts: a mechanistic study. RSC Advances, 4. pp. 41612-41621. ISSN 2046-2069

Prasad, B V R S N and Janardhanan, V (2014) Modeling sulfur poisoning of ni-based anodes in solid oxide fuel cells. Journal of The Electrochemical Society, 161 (3). pp. 208-213. ISSN 0013-4651

Reddy, E H and Jayanti, S and Monder, D S (2014) Thermal management of high temperature polymer electrolyte membrane fuel cell stacks in the power range of 1-10 kWe. International Journal of Hydrogen Energy, 39 (35). pp. 20127-20138. ISSN 0360-3199

S, Madhu Seetharaman and Puvvala, N and P, Naresh Kumar and Singh, S P and M, Deepa and Namboothiry, M A G (2014) Efficient organic-inorganic hybrid perovskite solar cells processed in air. Physical Chemistry Chemical Physics, 16 (45). pp. 24691-24696. ISSN 1463-9076

Sahu, K C and Govindarajan, R (2014) Instability of a free-shear layer in the vicinity of a viscosity-stratified layer. Journal of Fluid Mechanics, 752. pp. 626-648. ISSN 0022-1120

Sahu, Kirti Chandra (2014) A Review on Double-diffusive Instability in Viscosity Stratified Flows. Proceedings of the Indian National Science Academy, 80 (3). p. 513. ISSN 0370-0046

Sharma, Chandra Shekhar and Katepalli, H and Sharma, A and Teixidor, G T and Madou, M J (2014) Fabrication of Resorcinol-Formaldehyde Xerogel based High Aspect Ratio 3-D Hierarchical C-MEMS Structures. ECS Transactions, 61 (7). pp. 45-54. ISSN 1938-5862

Tripathi, M K and Sahu, K C and Govindarajan, R (2014) Why a falling drop does not in general behave like a rising bubble. Scientific Reports, 4 (4771). pp. 1-9. ISSN 2045-2322

Vakamalla, T R and Kumbhar, K S and Gujjula, R and Mangadody, Narasimha (2014) Computational and experimental study of the effect of inclination on hydrocyclone performance. Separation and Purification Technology, 138. pp. 104-117. ISSN 1383-5866

Virivinti, N and Mitra, Kishalay (2014) Expected value analysis for an industrial grinding process with fuzzy uncertain parameters. Computer Aided Chemical Engineering, 33. pp. 1453-1458. ISSN 1570-7946

Virivinti, N and Mitra, Kishalay (2014) Fuzzy Expected Value Analysis of an Industrial Grinding Process. Powder Technology, 286. pp. 9-18. ISSN 0032-5910

Book Section

Mazumder, Ankita and Maity, Sunil Kumar and Sen, Dwaipayan and et al, . (2014) Process development for hydrolysate optimization from lignocellulosic biomass towards biofuel production. In: Alcohols and Bioalcohols: Characteristics, Production and Uses. Nova Science Publishers, Inc., pp. 41-76. ISBN 978-163463187-7

Conference or Workshop Item

Baghel, A K and Naik, S and Chandra Sahu, Kirti and Anand, M (2014) Simulation of blood flow in the stenosed left coronary artery. In: International Conference on Computational Systems in Engineering and Technology, 7-8 March 2014, Chennai, India.

Chandra, B S and Challa, Subrahmanya Sastry and Jana, Soumya (2014) Reliable low-cost telecardiology: High-sensitivity detection of ventricular beats using dictionaries. In: 16th IEEE International Conference on e-Health Networking, Applications and Services, Healthcom 2014, 15-18 October, 2014, Natal; Brazil.

Devarai, Santhosh Kumar and Kumar, Sura Venkata Suresh and Srilatha, Kadhurla (2014) Protein coated gold nanoparticle synthesis: A mathematical model approach for proteasome inhibition. In: Global Cancer Conference & Medicare Summit, Hyderabad, India, 15-17 September 2014.

Kakunuri, M and Sharma, Chandra Shekhar (2014) Photoresist Derived Carbon Films as High Capacity Anodes for Lithium Ion Battery. In: 225th ECS Meeting, May 11 – 15, 2014, Orlando, FL.

Kulkarni, Kedar and Mittal, Prateek (2014) A fast and effective algorithm to optimize the total number and placement of wind turbines. In: IEEE Global Humanitarian Technology Conference - South Asia Satellite (GHTC-SAS), 26-27 September 2014, Trivandrum, India.

Kumar, N and Jagadeeshwar, K and Anand, M (2014) Maxwell Fluid Model for Small Amplitude Oscillatory Shear Data with Varying Angular Frequency For Poly-Vinyl alcohol-sodium borate(PVA-SB) gels. In: International Conference on Theoretical, Applied, Computational, and Experimental Mechanics(ICTACEM), 29-31 December 2014, Kharagpur, India.

M, Durga Prakash and Vanjari, Siva Rama Krishna and Dutta, Asudeb and Challa, Subrahmanya Sastry and Singh, Shiv Govind (2014) Development of MWCNT/SU-8 nanofiber composite using electrospinning technique for biosensing applications. In: SENSORS, 2014 IEEE, 2-5 Nov, 2014, Valencia.

Mangadody, Narasimha and J, Crasta and T, Sreenivas and A N, Mainza (2014) Performance of hydrocyclone separating bi-component mixture. In: XXVII International Mineral Processing Congress – IMPC 2014, 20-24 October, 2014, Sheraton Hotel, Santiago, Chile.

Mattaparthi, S and Sharma, Chandra Shekhar (2014) Fabrication of Rough Polymer Surfaces Exhibiting Anti-reflective Properties. In: MRS Proceedings, 2015.

Mayank, K and Mahale, M and narasimha, M and et al, . (2014) Coupled DEM-CFD Model to Predict the Tumbling Mill Dynamics. In: IUTAM Symposium on Multiphase Flows with Phase Change Challenges and Opportunities, 8-11 December 2014, Hyderabad.

Mogilicharla, A and Majumdar, S and Mitra, Kishalay (2014) Kinetic Analysis and Optimization of Long Chain Branched Propylene Polymerization System. In: 19th World Congress of the International Federation of Automatic Control, 24-29 August 2014, Cape Town, South Africa.

Mogilicharla, A and Majumdar, S and Mitra, Kishalay (2014) Modeling and Optimization of propylene polymerization with branching. In: 24th European Symposium on Computer Aided Process Engineering – ESCAPE 24, June 15-18, 2014, Budapest, Hungary.

Naidu, R and Jampana, Phanindra Varma and Sastry, Challa Subrahmanya (2014) Determinitic compressed sensing matrices using multivariable polynomials. In: 3rd Annual International Conference on Computational Mathematics, Computational Geometry & Statistics (CMCGS), 3 - 4 February 2014, Singapore.

Reddy, V Teja and Mangadody, Narasimha (2014) Modelling turbulent flow of cyclone separation: prediction of turbulence effect on particle classification. In: IUTAM Symposium on Multiphase flows with phase change: challenges and opportunities, 08-11 Dec 2014, Hyderabad, India.

Sharma, Chandra Shekhar and Katepalli, H and Sharma, Ashutosh (2014) Fabrication of Resorcinol-Formaldehyde Xerogel Based High Aspect Ratio 3-D Hierarchical C-MEMS Structures. In: 225th ECS Meeting, 11 – 15 May 2014, Orlando, FL.

Sharma, Chandra Shekhar and Khobragade, L and Ch, Subrahmanyam (2014) Synthesis, characterization and application of cellulose acetate derived electrospun carbon nanofibers. In: 247th National Spring Meeting of the American-Chemical-Society (ACS), 16-20 Mar, 2014, Dallas, TX.

Sharma, Chandra Shekhar and Mattaparthi, S (2014) Canna indica seedpod: An inspiration to fabricate high aspect ratio hierarchical superhydrophobic surfaces. In: 247th National Spring Meeting of the American-Chemical-Society (ACS), 16-20 Mar, 2014, Dallas, TX.

Tripathi, M K and Sahu, Kirti Chandra (2014) Evaporating Falling Drop. In: IUTAM Symposium on Multiphase flows with phase change: challenges and opportunities, 8-11 December 2014, Hyderabad, India.

Virivinti, N and Mitra, Kishalay (2014) Expected Value Analysis for an Industrial Grinding Process with Fuzzy Uncertain Parameters. In: European Symposium on Computer Aided Process Engineering (ESCAPE 24), 15-18 June 2014.

Thesis

Adaval, A (2014) PS-b-PMMA Block Copolymer Derived Electrospun Nanofibers: Synthesis, Characterization and Surface Properties Evaluation. Masters thesis, Indian Institute of Technology, Hyderabad.

Appari, S and Janardhanan, V (2014) Experimental and Theoretical Investigation of Catalyst Poisoning and Regeneration During Biogas Steam Reforming on Nickel. PhD thesis, IIT Hyderabad.

Bhalla, P (2014) Kinetics and Molecular Requirements of Klebsiella Pneumoniae-Induced Endovascular Infections under Hydrodynamic Shear as a Function of Platelet Activation. Masters thesis, Indian Institute of Technology, Hyderabad.

Chandran, R P (2014) Prediction of Interfacial Property of Liquid Systems by Multiscale Modelling. Masters thesis, Indian Institute of Technology, Hyderabad.

Chatterjee, P (2014) Modelling and Optimization of Polymer Systems. Masters thesis, Indian Institute of Technology, Hyderabad.

Gujjula, R K (2014) Hydrodynamic study of gas-solid flow in an internally circulating fluidized bed (ICFB) using experimental and CFD techniques. PhD thesis, Indian Institute of Technology Hyderabad.

K, Praveen Kumar (2014) Process Design and Economic Analysis of Bio-Butanol Process. Masters thesis, Indian Institute of Technology, Hyderabad.

Killada, S (2014) Fabrication of Polymer Surfaces with Varying Roughness and Its Effect on Anti-Reflective Properties. Masters thesis, Indian Institute of Technology, Hyderabad.

Kumar, Nitin (2014) Constitutive modeling of Poly Vinyl Alcohol-Sodium Borate gel. Masters thesis, Indian Institute of Technology, Hyderabad.

Mayank, K (2014) Development of DEM-CFD coupled model for determining Tumbling mill dynamics. Masters thesis, Indian Institute of Technology, Hyderabad.

Meshram, A (2014) A Study of Carbon Deposition during Dry Reforming of Biogas. Masters thesis, Indian Institute of Technology.

Mogilicharla, A and Majumdar, Saptarshi (2014) Controlled Branching of Industrially Important Polymers: Modeling and Multi-objective Optimization. PhD thesis, Indian Institute of Technology, Hyderabad.

Nissi, V M (2014) Photocatalytic Conversion of Biomass Derived Oxygenated Compounds over Titania Supported Metal Catalyst. Masters thesis, Indian Institute of Technology, Hyderabad.

R, Anil (2014) A Computational Model to Predict Antibiotic Susceptibility of Pseudomonas Aeruginosa Biofilms. Masters thesis, Indian Institute of Technology, Hyderabad.

Redapangu, P R (2014) Lattice Boltzmann Simulations of Some Novel Multiphase Flows. PhD thesis, IIT Hyderabad.

Reddy, S P (2014) Catalytic Conversion of Synthesis Gas to Dimethyl Ether over Cu-Zno/Meso-Sio2-Al2O3 Bi-Functional Catalysts. Masters thesis, Indian Institute of Technology.

Rustam, S S (2014) Fuel utilization and its effect on solid oxide fuel cell performance. Masters thesis, Indian Institute of Technology, Hyderabad.

Sasi, Kiran (2014) Unsteady state model of water content inside membrane of Polymer Electrolyte Membrane Fuel cell. Masters thesis, Indian Institute of Technology, Hyderabad.

Sehgal, A (2014) Flow Past a Cylinder Using Lattice Boltzmann Method. Masters thesis, Indian Institute of Technology.

Vudikala, C (2014) Characterization of Bubble Column Using Electrical Resistance Tomography and Image Processing. Masters thesis, Indian Institute of Technology, Hyderabad.