Items where Division is "Department of Chemical Engineering" and Year is 2013

B

B, Ramakrishna (2013) Simulation of Blood Flow through Stenosed Artery. Masters thesis, Indian Institute of Technology, Hyderabad.

D

Dhanala, V and Maity, Sunil Kumar and Shee, Debaprasad (2013) Steam reforming of isobutanol for the production of synthesis gas over Ni/g-Al2O3 catalysts. RSC Advances, 3. pp. 24521-24529. ISSN 2046-2069

E

Ellamla, H R (2013) Thermal management studies for a high temperature proton exchange membrane fuel cell stack. PhD thesis, IIT Hyderabad.

Ellamla, H R and Monder, D S and Jayanti, S (2013) Parametric study of an external coolant system for a high temperature polymer electrolyte membrane fuel cell. Applied Thermal Engineering, 58 (1-2). pp. 155-164. ISSN 1359-4311

G

Gujjula, R and Mangadody, Narasimha (2013) Prediction of solid recirculation rate and solid volume fraction in an internally Circulating Fluidized bed (ICFB). In: APCOM & ISCM, 11-14, December 2013, Singapore. (Submitted)

J

Jujjavarapu, S E and Mohan, Anand and Chimmiri, V (2013) Optimum culture medium composition for rhamnolipid production by pseudomonas aeruginosa AT10 using a novel multi-objective optimization method. Journal of Chemical Technology and Biotechnology, 88 (2). pp. 271-279. ISSN 0268-2575

K

Karapetsas, G and Sahu, K C and Matar, O K (2013) Effect of contact line dynamics on the thermocapillary motion of a droplet on an inclined plate. Langmuir, 29 (28). pp. 8892-8906. ISSN 0743-7463

Kohno, H and Liu, S and Ogura, T and Ishimoto, T and Monder, D S and Karan, K and Koyama, M (2013) Detailed Transport-Reaction Models for SOFC Ni-YSZ Patterned Anodes: A Critical Inquiry. In: ECS Transactions.

Kulkarni, Manish and Sharma, Chandra Shekhar and Karim, Alamgir (2013) Bad-solvent Induced Tunable Nanoscale Roughness in Polymer, Block Co-polymer and Carbon Thin Films. In: APS Meeting, 18–22 March 2013, Baltimore, Maryland.

Kumar, Sanjay and Monder, Dayadeep (2013) A Fully Coupled Transport-Reaction Model for a Solid Oxide Fuel Cell. Masters thesis, Indian Institute of Technology, Hyderabad.

Kumbhar, Kedar and Reddy, VTSR Kumar and Mangadody, Narasimha (2013) Computational and experimental study of the effect of inclination on hydrocyclone performance. In: International Seminar on Mineral Processing Technology, 10-12 December 2013, Bhubaneswar, India.

M

M, Anand and Kwack, K and Masud, A (2013) A new generalized Oldroyd-B model for blood flow in complex geometries. International Journal of Engineering Science, 72. pp. 78-88. ISSN 0020-7225

Mattaparthi, S and Sharma, Chandra Shekhar (2013) Biomimicked Polymer Surfaces Exhibiting Superhydrophobic and Anti-Reflective Properties. Masters thesis, Indian Institute of Technology, Hyderabad.

Menon, V and Janardhanan, V and Deutschmann, O (2013) Modeling of Solid-Oxide Electrolyser Cells: From H2, CO Electrolysis to Co-Electrolysis. ECS Transactions, 57 (1). pp. 3207-3216. ISSN 1938-5862

Menon, V and Janardhanan, V and Tischer, S (2013) Internal Multi-Physics Phenomena of SOFC with Direct Internal Reforming. ECS Transactions. ISSN 1938-5862

Mitra, Kishalay (2013) Evolutionary Surrogate Optimization of an Industrial Sintering Process. Materials and Manufacturing Processes, 28 (7). pp. 768-778. ISSN 1042-6914

Mitra, Kishalay (2013) Parametric Sensitivity Through Optimization Under Uncertainty Approach. Computer Methods in Materials Science, 13 (1). pp. 107-112. ISSN 1641-8581

Monder, D S and Karan, K (2013) Coverage Dependent Thermodynamics for Sulfur Poisoning of Ni Based Anodes. In: ECS Transactions.

N

Narasimhaiah, G and Janardhanan, V (2013) Modeling CO2 electrolysis in solid oxide electrolysis cell. Journal of Solid State Electrochemistry, 17 (8). pp. 2361-2370. ISSN 1432-8488

Neill, P and Giri, Lopamudra and Karunarathne, Ajith and Janardhanan, V (2013) The structure of dynamic GPCR signaling networks. Wiley Interdiscip Rev Syst Biol Med.

P

Polisetty, V G and Jampana, Phanindra Varma (2013) State Estimation in Solid Oxide Fuel Cell(SOFC)System. Masters thesis, Indian Institute of Technology, Hyderabad.

R

Rakesh, A and Kumar, VTSR and narasimha, M and Mangadody, Narasimha (2013) Measurement of air-core size and shape using the electrical resistance tomography of operating hydrocyclone: Validation with cfd predictions. In: 13th European symposium on comminution and classification, 9-12 September 2013, Braunscheweig, Germany.

Redapangu, P R and Sahu, Kirti Chandra (2013) Three-Dimensional LBM Simulations of Buoyancy-Driven Flow Using Graphics Processing Units. In: National Conference on Parallel Computing Technologies, 21-23 February 2013, Bangalore, India.

Redapangu, P R and Sahu, Kirti Chandra and Vanka, S P (2013) A lattice boltzmann simulation of three-dimensional displacement flow of two immiscible liquids in a square duct. Journal of Fluids Engineering, 135 (12). pp. 1-8. ISSN 0098-2202

S

Sahu, Kirti Chandra (2013) Double diffusive effects on pressure-driven miscible channel flow: Influence of variable diffusivity. International Journal of Multiphase Flow, 55. pp. 24-31. ISSN 0301-9322

V

Vadlakonda, Balraju and Mangadody, Narasimha (2013) CFD modelling of column flotation: Prediction of two phase flow hydrodynamics. In: International Seminar on Mineral Processing Technology, 10-12 December 2013, Bhubaneswar, India.