Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2021

A

Abhijith, M. S. and Venkatasubbaiah, K. (2021) NUMERICAL STUDY OF VARIATION IN DRAG AND VIRTUAL MASS FORCES FOR A NANOFLUID FLOW THROUGH A MICROCHANNEL USING EULERIAN-EULERIAN TWO-PHASE MODEL. Computational Thermal Sciences: An International Journal, 13 (2). pp. 57-73. ISSN 1940-2503

Agrawal, Meenu and Gaurav, Ashish and Karri, Badarinath and Sahu, Kirti Chandra (2021) An experimental study of two identical air bubbles rising side-by-side in water. Physics of Fluids, 33 (3). 032106. ISSN 1070-6631

Ahmad, Gulshad Nawaz and Raza, Mohammad Shahid and Singh, N.K. and Muvvala, Gopinath (2021) Investigating the effect of process parameters on weld pool thermal history and mechanical properties of laser welded Inconel 625 and Duplex stainless steel 2205 dissimilar welds. Optik, 248. pp. 1-11. ISSN 0030-4026

Akiwate, D. and Date, M. and Venkatesham, B. and Suryakumar, S. (2021) Acoustic Properties of Additive Manufactured Porous Material. In: 46th National Symposium on Acoustics, NSA 2017, 28 October 2017 to 30 October 2017, Aligarh.

Ali Anshari, Md Anwar and Imam, Murshid and Khan Yusufzai, Mohd Zaheer and Chinthapenta, Viswanath and Mishra, Rajnish (2021) Stir zone anisotropic work hardening behavior in friction stir processed EN8 medium carbon steel. Materials Science and Engineering: A, 805. p. 140582. ISSN 09215093

Andraju, L. B. and Ramji, M. and et al, . (2021) Snap-buckling and failure studies on CFRP laminate with an embedded circular delamination under flexural loading. Composites Part B: Engineering, 214. p. 108739. ISSN 13598368

B

B, Anuj and Nayak, G Mahesh and B, Yogesh and Balusamy, Saravanan (2021) Numerical Investigation Into the Effect of Air Swirl on Non-Premixed Combustion. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2 December 2021through 3 December 2021, Virtual, Online.

B, Venkatesham and Nalawade, Amogh and S Y, Veerabhadra Reddy (2021) Free vibration analysis of structural-acoustic coupled system using hybrid impedance and mobility approach. Journal of Vibroengineering, 23 (1). pp. 273-282. ISSN 1392-8716

B., Anvesh and K., Dhanush and Franklin, Antony and et al, . (2021) Analyzing Quantum Network Routing Protocols through Time-Driven Simulations. In: 15th IEEE International Conference on Advanced Networks and Telecommunications Systems, ANTS 2021, 13 -16 December 2021, Hyderabad.

Bhatnagar, S and Mullick, S and Gopinath, M (2021) A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding. Optik, 247. p. 168015. ISSN 0030-4026

Bhatnagar, S. and Mullick, S. and Gopinath, M. (2021) A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding. Optik - International Journal for Light and Electron Optics, 247. p. 168015.

Bhatnagar, Shrey and Mullick, Suvradip and Gopinath, Muvvala (2021) A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding. Optik, 247. pp. 1-12. ISSN 0030-4026

C

Chattopadhyay, A. et al (2021) Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium. Optics and Laser Technology, 133 (106527). ISSN 0030-3992

D

D, Veerababu and B, Venkatesham (2021) A Green's Function Solution for Acoustic Attenuation by a Cylindrical Chamber with Concentric Perforated Liners. Journal of Vibration and Acoustics, 143 (2). 021004-021015. ISSN 1048-9002

Das, Biswajit and Gopinath, Muvvala and Nath, Ashish Kumar and et al, . (2021) Online monitoring of thermo cycles during laser remelting of flame sprayed chromia coating in pulsed mode and coating properties. Optik, 227. pp. 1-11. ISSN 0030-4026

G

Golla, Siva Teja and Venkatesham, B. (2021) Experimental study on the effect of centrally positioned vertical baffles on sloshing noise in a rectangular tank. Applied Acoustics, 176. p. 107890. ISSN 0003682X

Gururani, Himanshu and Richhariya, Ashutosh and M, Ramji and Chinthapenta, Viswanath (2021) Implications of the structure-property relationship on the optomechanical characterization of the cornea: A review. Optik, 232. p. 166529. ISSN 00304026

H

Hoek, Harmen and Dey, Ranabir and Mugele, Frieder (2021) Electrowetting‐Controlled Dropwise Condensation with Patterned Electrodes: Physical Principles, Modeling, and Application Perspectives. Advanced Materials Interfaces, 8 (2). pp. 1-10. ISSN 2196-7350

Hokmabad, B.V. and Dey, R. and et al, . (2021) Emergence of Bimodal Motility in Active Droplets. Physical Review X, 11 (011043). ISSN 21603308

Hoskoti, L. and Misra, A. and Sucheendran, M.M. (2021) Modal analysis of a rotating twisted and tapered Rayleigh beam. Archive of Applied Mechanics, 91. pp. 2535-2567. ISSN 10298479

J

Jana, A. and M S, Mahesh (2021) Numerical study of flow structures of underwater supersonic jets. In: AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2021, 11 January 2021through 15 January 2021, Virtual, Online.

Jobin, T.M. and Ramji, M. and Khaderi, S.N. (2021) A comparison of domain integral and multi-parameter methods for the strain intensity factor estimation of rigid line inclusion using digital image correlation. Theoretical and Applied Fracture Mechanics, 115. p. 103064. ISSN 0167-8442

K

Kale, Rakesh and Banerjee, Raja (2021) Optical investigation of flash boiling and its effect on in-cylinder combustion for butanol isomers and iso-octane. International Journal of Engine Research, 22 (5). pp. 1565-1578. ISSN 1468-0874

Kandala, Shanti Swaroop and Uchida, Thomas K. and Vyasarayani, Chandrika Prakash (2021) Pole Placement for Delay Differential Equations With Time-Periodic Delays Using Galerkin Approximations. Journal of Computational and Nonlinear Dynamics, 16 (9). pp. 1-10. ISSN 1555-1415

Karanam, Madhu Kiran and Chinthapenta, Viswanath R. (2021) Void growth and morphology evolution during ductile failure in an FCC single crystal. Continuum Mechanics and Thermodynamics, 33 (2). pp. 497-513. ISSN 0935-1175

Karanam, Madhu Kiran and Gulivindala, Gopi and Chinthapenta, Viswanath R. (2021) Effect of anisotropy on the ductile fracture in metal reinforcements of brittle matrix composites. Theoretical and Applied Fracture Mechanics, 112 (102923). ISSN 01678442

Karmakar, Debapriya Patra and Muvvala, Gopinath and Nath, Ashish Kumar (2021) High-temperature abrasive wear characteristics of H13 steel modified by laser remelting and cladded with Stellite 6 and Stellite 6/30% WC. Surface and Coatings Technology, 422. pp. 1-12. ISSN 0257-8972

Katre, Pallavi and Banerjee, Sayak and Balusamy, Saravanan and Sahu, Kirti Chandra (2021) Fluid dynamics of respiratory droplets in the context of COVID-19: Airborne and surfaceborne transmissions. Physics of Fluids, 33 (8). 081302. ISSN 1070-6631

Khaderi, Syed Nizamuddin and Chetan, S. and Sreejith, M. (2021) Numerical Analysis of Heat Transfer Enhancement in a Micro-Channel Due to Mechanical Stirrers. Journal of Thermal Science and Engineering Applications, 13 (1). pp. 1-10. ISSN 1948-5085

Krishna, G. Vamsi and Narayanamurthy, V and Chinthapenta, Viswanath (2021) Effectiveness of FRP strengthening on buckling characteristics of metallic cylindrical shells. Composite Structures, 262. p. 113653. ISSN 0263-8223

Kulkarni, Janmejay Dattatraya and Goka, Suresh Babu and Parchuri, Pradeep Kumar and Yamamoto, Hajime and Ito, Kazuhiro and Suryakumar, S (2021) Microstructure evolution along build direction for thin-wall components fabricated with wire-direct energy deposition. Rapid Prototyping Journal, 27 (7). pp. 1289-1301. ISSN 1355-2546

Kumar, M. and Kumar, S.S. and Sharma, A. (2021) Bi-polynomial fourth-order weld bead model for improved material utilization and accuracy in wire-arc additive manufacturing: A case of transverse twin-wire welding. Advances in Industrial and Manufacturing Engineering, 2. p. 100049. ISSN 26669129

Kumar, Manish and Quadir Moinuddin, Syed and Kumar, S. Surya and Sharma, Abhay (2021) Discrete wavelet analysis of mutually interfering co-existing welding signals in twin-wire robotic welding. Journal of Manufacturing Processes, 63. pp. 139-151. ISSN 15266125

Kumar, Mayank and Reddy, Rajesh and Banerjee, Raja and Mangadoddy, Narasimha (2021) Effect of particle concentration on turbulent modulation inside hydrocyclone using coupled MPPIC-VOF method. Separation and Purification Technology, 266 (118206). ISSN 13835866

Kumar, N. and Khaderi, Syed Nizamuddin (2021) The Detachment of an Inclined Micro-Pillar Adhered to a Dissimilar Substrate. Journal of Applied Mechanics, 88 (10). pp. 1-15. ISSN 0021-8936

Kumar Mohanty, Uttam and Sharma, Abhay (2021) Recent developments in AC square waveform welding. In: 2nd International Conference on Aspects of Materials Science and Engineering, ICAMSE 2021, 5 March 2021through 6 March 2021, Chandigarh.

M

MS, A. and Venkatasubbaiah, K. (2021) Numerical investigation on laminar forced convection of MEPCM-water slurry flow through a micro-channel using Eulerian-Eulerian two-phase model. Thermal Science and Engineering Progress, 22. p. 100803. ISSN 24519049

Mahesh Nayak, G. and Kolhe, Pankaj and Balusamy, Saravanan (2021) Experimental study of buoyancy-induced instability in the DME and LPG jet diffusion flame. Fuel, 291 (120173). p. 120173. ISSN 00162361

Mehta, S. and Raju, G. and Saxena, P. (2021) Growth induced instabilities in a circular hyperelastic plate. International Journal of Solids and Structures, 226-22. ISSN 00207683

Mehta, S. and Raju, G. and Saxena, P. (2021) Growth induced instabilities in a circular hyperelastic plate. International Journal of Solids and Structures, 226-22 (111026). ISSN 00207683

Mehta, Sumit and Raju, Gangadharan and Saxena, Prashant (2021) Growth induced instabilities in a circular hyperelastic plate. International Journal of Solids and Structures, 226-22. p. 111026. ISSN 00207683

Mohan Kumar, S. and Rajesh Kannan, A. and Pravin Kumar, N. and Pramod, R. and Siva Shanmugam, N. and Vishnu, A. S. and et al, . (2021) Microstructural Features and Mechanical Integrity of Wire Arc Additive Manufactured SS321/Inconel 625 Functionally Gradient Material. Journal of Materials Engineering and Performance, 30 (8). pp. 5692-5703. ISSN 1059-9495

Mohanty, U.K. and et al, . (2021) Thermal modelling of alternating current square waveform arc welding. Case Studies in Thermal Engineering, 25. ISSN 2214157X

Murugan, Raju and Balusamy, Saravanan and Kolhe, Pankaj (2021) Experimental Study of Liquid Spray Mode of Twin Fluid Atomizer Using Optical Diagnostic Tool. Flow, Turbulence and Combustion, 106 (1). pp. 261-289. ISSN 1386-6184

Murugan, Raju and Kolhe, Pankaj S. (2021) Experimental investigation into flow blurring atomization. Experimental Thermal and Fluid Science, 120. p. 110240. ISSN 08941777

N

Nath, Dubba Sai Charan (2021) Effect of Airfoil Profiles on Radar Cross Section of a Cropped Delta Wing. In: 2nd International Conference on Range Technology, ICORT 2021, 5 August 2021 through 6 August 2021, Chandipur, Balasore.

Nath Dubba, Sai Charan (2021) Effect of Trailing Edge Flap Deflection on Bi-static Radar Cross Section of a Wing. In: ICCISc 2021 - 2021 International Conference on Communication, Control and Information Sciences, Proceedings, 16 June 2021 - 18 June 2021, Idukki.

Nayak, G Mahesh and B, Abinash and Balusamy, Saravanan and et al, . (2021) Numerical Investigation Into the Effects of CoFlow Air on a Self-Excited Helium Jet. In: ASME 2021 Gas Turbine India Conference, GTINDIA 2021, 2 December 2021through 3 December 2021, Virtual, Online.

Nayak, Guguloth Mahesh and Nikhil, K and Kolhe, Pankaj S. and Balusamy, Saravanan (2021) Effect of Strain Rate on Diffusion Flame Structure and Relationship in Scalar Fields. In: Lecture Notes in Mechanical Engineering, 13 December 2019 - 17 December 2019.

P

Pal, Prem and Swarnalatha, Veerla and Rao, Avvaru Venkata Narasimha and Pandey, Ashok Kumar and Tanaka, Hiroshi and Sato, Kazuo (2021) High speed silicon wet anisotropic etching for applications in bulk micromachining: a review. Micro and Nano Systems Letters, 9 (1). ISSN 2213-9621

Panda, Pranoy and Barczyk, Martin (2021) Blending of Learning-based Tracking and Object Detection for Monocular Camera-based Target Following. In: 24th International Symposium on Mathematical Theory of Networks and Systems, MTNS 2020, 23 August 2021 through 27 August 2021, Cambridge.

Pillarisetti, L.S.S. and Raju, G. and Subramanian, A. (2021) Sectorial Plane Wave Imaging for Ultrasonic Array-Based Angle Beam Inspection. Journal of Nondestructive Evaluation, 40 (3). ISSN 01959298

Pillarisetti, Lalith Sai Srinivas and Anandamurugan, Subramanian (2021) Ultrasonic Inspection of Weld Defects Using Total Focusing Method. In: Conference and Exhibition on Non Destructive Evaluation, NDE 2019, 5 December 2019through 7 December 2019, Bangalore.

Pn V., G. and Vommi, V. and Choudhary, A. and Muvvala, G. (2021) A study on the effect of molten pool thermal history and gaseous environment in laser surface alloying of AISI 1020 steel with TiN. Optik, 245. p. 167758. ISSN 00304026

Pradhan, S.P and Saxena, P. (2021) Buckling of chiral rods due to coupled axial and rotational growth. Mathematics and Mechanics of Solids, 26 (11). pp. 1675-1700. ISSN 10812865

Purohit, Soumya and Pal, Prem and Pandey, Ashok Kumar (2021) Comparative study of perforated microcantilevers for MEMS applications. In: 2021 Symposium on Design, Test, Integration and Packaging of MEMS and MOEMS, DTIP 2021, 25 August 2021 through 27 August 2021, Paris.

R

Ranjan, P. and Pandey, A.K. (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. ISSN 0301679X

Ranjan, P. and Pandey, A.K. (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. ISSN 0301679X

Ranjan, Prabhat and Pandey, Ashok Kumar (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. p. 107071. ISSN 0301679X

Ratolikar, Mangesh D. and Kumar, R Prasanth (2021) Neural Network Control of an Inverted Pendulum on a Two DoF Cart Moving in the Vertical Plane. In: 6th International Conference on Robotics and Automation Engineering, ICRAE 2021, 19 November 2021through 22 November 2021, Guangzhou.

S

Sakate, P. and Mullick, S. and Gopinath, M. (2021) An investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation. Optik, 242. p. 167272. ISSN 00304026

Sakate, P.M. and Mullick, S. and Gopinath, M. (2021) An investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation. Optik, 242 (167272). ISSN 00304026

Sakate, Parag Malhari and Mullick, Suvradip and Gopinath, Muvvala (2021) An investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation. Optik, 242. pp. 1-12. ISSN 0030-4026

Samukham, Surya and Khaderi, S. N. and Vyasarayani, C. P. (2021) Galerkin–Ivanov transformation for nonsmooth modeling of vibro-impacts in continuous structures. Journal of Vibration and Control, 27 (13-14). pp. 1548-1560. ISSN 1077-5463

Satyanarayana Raju, P. and Nayak, Guguloth Mahesh and Balusamy, S. (2021) Effect of Air Co-flow on Flickering Motion of LPG Laminar Diffusion Jet Flame. Lecture Notes in Mechanical Engineering. pp. 717-725. ISSN 2195-4356

Sellan, Dhanalakshmi and Balusamy, Saravanan (2021) Experimental study of swirl-stabilized turbulent premixed and stratified LPG/air flames using optical diagnostics. Experimental Thermal and Fluid Science, 121. p. 110281. ISSN 08941777

Sellan, Dhanalakshmi and Murugan, Raju and Balusamy, Saravanan (2021) Effect of Reynolds Number on the Non-reacting Turbulent Flow Structures of a Double Swirler Burner. Lecture Notes in Mechanical Engineering. pp. 375-382. ISSN 2195-4356

Shaik, Shamshoddin and Raj, Abhishek and Manikandan, G. and Verma, Rahul Kumar and Reddy, N Venkata (2021) Prediction of Forming Strain for Optimum Dent Resistance. International Journal of Mechanical Engineering and Robotics Research, 10 (11). pp. 633-638. ISSN 2278-0149

Sharma, Abhay and Mohanty, Uttam Kumar and Tanaka, Manabu and et al, . (2021) Mechanism of Gap Bridgeability in Lap-Fillet Laser-Arc Hybrid Welding. Lasers in Manufacturing and Materials Processing, 8 (3). pp. 355-371. ISSN 2196-7229

Shirude, Ashutosh and Vyasarayani, C. P. and Chatterjee, Anindya (2021) Towards design of a nonlinear vibration stabilizer for suppressing single-mode instability. Nonlinear Dynamics, 103 (2). pp. 1563-1583. ISSN 0924-090X

Som, Sumana and Mathew, Deepak John and Vincs, Kim (2021) Harnessing Immersive Technology with Art and Design: A Conceptual Design Procedure with the Aid of Virtual Reality. Smart Innovation, Systems and Technologies, 222. pp. 955-967. ISSN 2190-3018

Soni, Surendra Kumar and Kolhe, Pankaj S. (2021) Liquid jet breakup and spray formation with annular swirl air. International Journal of Multiphase Flow, 134. p. 103474. ISSN 03019322

Sriramoju, S K and Kumar, D and Majumdar, Saptarshi and Dash, P S and Shee, Debaprasad and Banerjee, Raja (2021) Sustainability of coal mines: Separation of clean coal from the fine-coal rejects by ultra-fine grinding and density-gradient-centrifugation. Powder Technology, 383. pp. 356-370. ISSN 0032-5910

Swami, A. and Pandey, A K and et al, . (2021) Experimental Study on Tire Contact Patch Characteristics for Vehicle Handling with Enhanced Optical Measuring System. SAE International Journal of Vehicle Dynamics, Stability, and NVH, 5 (3). pp. 333-350. ISSN 2380-2170

T

Tekure, V. and Venkatasubbaiah, K. (2021) Effect of Mach number and plate thickness on the flow field and heat transfer characteristics of supersonic turbulent flow over a flat plate at different thermal boundary conditions. European Journal of Mechanics - B/Fluids, 88. pp. 160-177. ISSN 09977546

Tekure, V. and Venkatasubbaiah, K. (2021) Numerical investigation on the extrusive and intrusive subcavity types and their location on the primary recirculation zone for the supersonic turbulent flow through cavity type flameholders. Thermal Science and Engineering Progress, 25. p. 100987. ISSN 24519049

Tekure, Veeresh and Pophali, Pratik Shrikant and Venkatasubbaiah, K (2021) Numerical investigation of aerospike semi-cone angle and a small bump on the spike stem in reducing the aerodynamic drag and heating of spiked blunt-body: New correlations for drag and surface temperature. Physics of Fluids, 33 (11). pp. 1-28. ISSN 1070-6631

Tiwari, Sankalp and Vyasarayani, C. P. and Chatterjee, Anindya (2021) Author Correction: Data suggest COVID-19 affected numbers greatly exceeded detected numbers, in four European countries, as per a delayed SEIQR model. Scientific Reports, 11 (1). ISSN 2045-2322

Tiwari, Sankalp and Vyasarayani, C. P. and Chatterjee, Anindya (2021) Data suggest COVID-19 affected numbers greatly exceeded detected numbers, in four European countries, as per a delayed SEIQR model. Scientific Reports, 11 (1). ISSN 2045-2322

Tiwari, Sankalp and Vyasarayani, C. P. and Chatterjee, Anindya (2021) Performance limit for base-excited energy harvesting, and comparison with experiments. Nonlinear Dynamics, 103 (1). pp. 197-214. ISSN 0924-090X

Tripathi, M. et al. (2021) Effect of Chord Variation on Subsonic Aerodynamics of Grid Fins. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicles, SAROD 2018, 29 November 2018 through 1 December 2018, Bengaluru.

Tripathi, M.et al (2021) Effect of Chord Variation on Subsonic Aerodynamics of Grid Fins. Lecture Notes in Mechanical Engineering, 53. pp. 105-128. ISSN 21954356

V

Vamsi A, Poorna Hima and Ratolikar, Mangesh D and Kumar R, R Prasanth (2021) Swinging Up and Balancing a Pendulum on a Vertically Moving Cart Using Reinforcement Learning. In: IEEE International Conference on Robotics and Biomimetics, ROBIO 2021, 27 December 2021through 31 December 2021, Sanya.

Veerababu, D. and Venkatesham, B. (2021) Evaluation of acoustic performance of multi-perforate lined chamber by means of green's function. In: 27th International Congress on Sound and Vibration, ICSV 2021, 11 July 2021 through 16 July 2021, Virtual, Online.

Veerababu, D. and Venkatesham, B. (2021) Transmission loss of lined Helmholtz resonator with annular air gap: A Green's function based approach. Noise Control Engineering Journal, 69 (2). pp. 112-121. ISSN 0736-2501

Venkatesham, B. and G, Krishna Reddy and G, Rami Reddy (2021) Study on longitudinal vibrations in turbomachinery coupled with skewed slotted bar cage induction motors. Journal of Vibroengineering, 23 (3). pp. 572-586. ISSN 1392-8716

Y

Yadav, Krishna Prakash and Kumar R., Prasanth (2021) Discrete Feedback Control for Robust Walking of Biped Dynamic Walker. In: 9th International Conference on Control, Mechatronics and Automation, ICCMA 2021, 11 November 2021 through 14 November 2021, Luxembourg.