Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2018
Up a level |
Article
Akarapu, Ashok and P, Manoj Kumar and Singh, Sajal Sagar and P, Raju and Pal, Prem and Pandey, Ashok Kumar (2018) Achieving wideband micromechanical system using coupled non-uniform beams array. Sensors and Actuators A: Physical, 273. pp. 12-18. ISSN 0924-4247
Akiwate, Deepak C and Date, Mahendra D and B, Venkatesham and S, Suryakumar (2018) Acoustic properties of additive manufactured narrow tube periodic structures. Applied Acoustics, 136. pp. 123-131. ISSN 0003-682X
Ashok, Akarapu and Sahu, Nagesh Kumar and Pal, Prem and Pandey, Ashok Kumar (2018) Arrow Shaped Microcantilever Beams for Enhancing Mass Sensitivity. IEEE Sensors. pp. 1-4. ISSN 1930-0395
Assam, Ashwani and Kalkote, Nikhil Narayan and Dongari, Nishanth and Eswaran, Vinayak (2018) Comprehensive Evaluation of a New Type of Smoluchowski Temperature Jump Condition. AIAA Journal. pp. 1-5. ISSN 0001-1452
Assam, Ashwani and Kalkote, Nikhil Narayan and Sharma, Vatsalya and Eswaran, Vinayak (2018) An Automatic Wall Treatment for Spalart-Allmaras Turbulence Model. Journal of Fluids Engineering. ISSN 0098-2202 (Submitted)
B, Venkatesham and Jade, Nagaraja (2018) Sound Source Reconstruction on Flexible Plate backed by a Cavity using Equivalent Source Method. NOISE Theory and Practice, 4 (1). pp. 5-17. ISSN 2412-8627
Banerjee, Nilanjan and Sharma, Abhay (2018) Improving machining performance of Ti-6Al-4V through multi-point minimum quantity lubrication method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054
Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and K R, Tarun and Dharmaraj, Arumuga Perumal and Kaisan, Muhammad Usman (2018) Experimental study of methyl tert-butyl ether as an oxygenated additive in diesel and Calophyllum inophyllum methyl ester blended fuel in CI engine. Environmental Science and Pollution Research, 25 (33). pp. 33573-33590. ISSN 0944-1344
Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and Muniappan, SenthilKumar and Reddy, Dandu Madhu Sudan and Subhash, Randive Vishal and Pravin, Nashte Adarsh and Subbarao, Rayapati (2018) Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel. Environmental Science and Pollution Research. pp. 1-17. ISSN 0944-1344
Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and P, Somasundaram and C, Jegadheesan and Chaturvedi, Bhaskar and Sharma, Shivam and Patni, Gaurang (2018) A novel study on the effect lemon peel oil as a fuel in CRDI engine at various injection strategies. Energy Conversion and Management, 172. pp. 517-528. ISSN 0196-8904
Chakraborty, Sayan and Kandala, Shanti Swaroop and Vyasarayani, C P (2018) Reduced Ordered Modelling of Time Delay Systems Using Galerkin Approximations and Eigenvalue Decomposition. IFAC-PapersOnLine, 51 (1). pp. 566-571. ISSN 2405-8963
De, A K and Eswaran, Vinayak and Mishra, P K (2018) Dynamics of plumes in turbulent Rayleigh–Bénard convection. European Journal of Mechanics, B/Fluids, 72. pp. 164-178. ISSN 0997-7546
Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2018) MHD buoyant flow in a cubical enclosure at low to high Hartmann number. International Journal of Thermal Sciences, 134. pp. 168-178. ISSN 1290-0729
Gajbhiye, Narendra Laxman and Throvagunta, Praveen and Eswaran, Vinayak (2018) Validation and verification of a robust 3-D MHD code. Fusion Engineering and Design, 128. pp. 7-22. ISSN 0920-3796
Gangele, Aparna and Garala, S K and Pandey, Ashok Kumar (2018) Influence of Van der Waals Forces on Elastic and Buckling Characteristics of Vertically Aligned Carbon Nanotubes. International Journal of Mechanical Sciences. ISSN 0020-7403 (In Press)
Gangele, Aparna and Pandey, Ashok Kumar (2018) Elastic and fracture characteristics of graphene-silicon nanosheet composites using nonlinear finite element method. International Journal of Mechanical Sciences, 142. pp. 491-501. ISSN 0020-7403
Golla, Siva Teja and K, Mayur and B, Venkatesham and Banerjee, Raja (2018) Experimental study of sloshing noise in a partially filled rectangular tank under periodic excitation. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ISSN 0954-4070
Hoskoti, Lokanna and Misra, Ajay and M S, Mahesh (2018) Frequency lock-in during vortex induced vibration of a rotating blade. Journal of Fluids and Structures, 80. pp. 145-164. ISSN 0889-9746
Imam, Murshid and Sun, Yufeng and Fujii, Hidetoshi and MA, Ninshu and Tsutsumi, Seiichiro and Ahmed, Shuja and Chinthapenta, Viswanath and Murakawa, Hidekazu (2018) Deformation characteristics and microstructural evolution in friction stir welding of thick 5083 aluminum alloy. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Jade, Nagaraja and B, Venkatesham (2018) Free vibrational analysis of rectangular ducts with different joint conditions. Journal of Theoretical and Applied Mechanics, 56 (4). pp. 1069-1081. ISSN 1429-2955
Jade, Nagaraja and Balide, Venkatesham (2018) Study on Effect of Joints on the Modal Parameters of Rectangular Duct. International Journal of Acoustics and Vibrations, 23 (4). pp. 547-556. ISSN 1027-5851
Janardhanan, V. and Prasanth Kumar, R. (2018) Generating real-time trajectories for a planar biped robot crossing a wide ditch with landing uncertainties. Robotica. pp. 1-32. ISSN 0263-5747 (In Press)
Kalkote, Nikhil Narayan and Assam, Ashwani and Eswaran, Vinayak (2018) Acceleration of Later Convergence in a Density-Based Solver Using Adaptive Time Stepping. AIAA Journal. pp. 1-13. ISSN 0001-1452
Kalkote, Nikhil Narayan and Assam, Ashwani and Eswaran, Vinayak (2018) Towards developing an adaptive time stepping for compressible unsteady flows. International Journal of Numerical Methods for Heat & Fluid Flow. ISSN 0961-5539 (In Press)
Kandala, Shanti Swaroop and Vyasarayani, Chandrika Prakash (2018) Pole placement for delay differential equations with time-periodic delays using Galerkin approximations. IFAC-PapersOnLine, 51 (1). pp. 560-565. ISSN 2405-8963
Kannan, Y S and Karri, Badarinath and Sahu, Kirti Chandra (2018) Letter: Entrapment and interaction of an air bubble with an oscillating cavitation bubble. Physics of Fluids, 30 (4). 041701. ISSN 1070-6631
Kodhanda, Adarsh and Ali, Nisar and M S, Mahesh and Talole, S E (2018) Robust control of nonlinear resonance in a clamped rectangular plate. Journal of Vibration and Control, 24 (18). pp. 4176-4194. ISSN 1077-5463
Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading. Composites Part B: Engineering. ISSN 1359-8368 (In Press)
Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Experimental and numerical studies on the buckling and post-buckling behavior of single blade-stiffened CFRP panels. Composite Structures. ISSN 0263-8223 (In Press)
Mastanaiah, P and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Process parameters-weld bead geometry interactions and their influence on mechanical properties: A case of dissimilar aluminium alloy electron beam welds. Defence Technology, 14 (2). pp. 137-150. ISSN 2214-9147
Matta, Seshadri and M, Ramji (2018) Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM. International Journal of Adhesion and Adhesives. ISSN 0143-7496 (In Press)
Mohanty, Uttam Kumar and Sharma, Abhay and Nakatani, Mitsuyoshi and Kitagawa, Akikazu and Tanaka, Manabu and Suga, Tetsuo (2018) A Semi-Analytical Nonlinear Regression Approach for Weld Profile Prediction: A Case of Alternating Current Square Waveform Submerged Arc Welding of Heat Resistant Steel. Journal of Manufacturing Science and Engineering, 140 (11). ISSN 1087-1357
Murugan, R. and Bollu, B. and Sekhar, K. and Kolhe, P.S. (2018) Experimental study of flow blurring twin fluid atomization concept using transparent injector. ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems (160082).
Nanthagopal, K and Ashok, B and B, Saravanan and Korah, Shane Mathew and Chandra, Snehith (2018) Effect of next generation higher alcohols and Calophyllum inophyllum methyl ester blends in diesel engine. Journal of Cleaner Production, 180. pp. 50-63. ISSN 0959-6526
Nanthagopal, K and Ashok, B and B, Saravanan and Patel, Deepam and Sudarshan, B and Aaditya Ramasamy, R (2018) An assessment on the effects of 1-pentanol and 1-butanol as additives with Calophyllum Inophyllum biodiesel. Energy Conversion and Management, 158. pp. 70-80. ISSN 01968904
Nogar, Stephen M and Serrani, Andrea and Gogulapati, Abhijit and McNamara, Jack J and Oppenheimer, Michael W and Doman, David B (2018) Design and Evaluation of a Model-Based Controller for Flapping-Wing Micro Air Vehicles. Journal of Guidance, Control, and Dynamics, 41 (12). pp. 2513-2528. ISSN 0731-5090
P, Mastanaiah and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Role of hybrid tool pin profile on enhancing welding speed and mechanical properties of AA2219-T6 friction stir welds. Journal of Materials Processing Technology, 257. pp. 257-269. ISSN 0924-0136
Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2018) Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing. Robotics and Computer-Integrated Manufacturing, 49. pp. 194-203. ISSN 0736-5845
Pandey, Ashok Kumar and Swarnalatha, Veerla and Pal, Prem and et al, . (2018) Determination of precise crystallographic directions on Si{111} wafers using self-aligning pre-etched pattern. Micro and Nano Systems Letters, 6 (1). pp. 1-9. ISSN 2213-9621
R Chinthapenta, Viswanath and Chaitanya Sagar, T (2018) Electronic Scale Properties Of Pristine Stanene And Tin Forms Using Ab-Initio Methods. Advanced Materials Letters, 10 (1). pp. 74-78. ISSN 09763961
Rajagopal, Amirtham and Nair, Dipin K and Singh, Sajal Sagar (2018) Dynamic analysis of microbeams based on modified strain gradient theory using differential quadrature method. European Journal of Computational Mechanics, 27 (3). pp. 187-203. ISSN 1779-7179
Rajendra Gaikwad, Shantanu and Pandey, Ashok Kumar (2018) Nonlinear Analysis of Shape Memory Devices With Duffing and Quadratic Oscillators. Journal of Computational and Nonlinear Dynamics, 13 (1). 011003. ISSN 1555-1415
Raju, Gangadharan and Wu, Zhangming and White, Simon and Weaver, Paul M (2018) Optimal Postbuckling Design of Variable Angle Tow Composite Plates. AIAA Journal. pp. 1-17. ISSN 0001-1452
Rao, Avvaru Venkata Narasimha and Swarnalatha, Veerla and Pandey, Ashok kumar and Pal, Prem (2018) Microstructures with Protected Convex Corners in Modified KOH Solution Exhibiting High-Speed Silicon Etching. IEEE Sensors. pp. 1-4. ISSN 1930-0395
Reddy, N Venkata and Kalathiya, K G and Konka, P and et al, . (2018) Analysis of Anisotropic Effects in Single Point Incremental Forming. Journal of Physics: Conference Series, 1063. 012125. ISSN 1742-6588
Reddy, N Venkata and Lingam, R (2018) Double Sided Incremental Forming: Capabilities and Challenges. Journal of Physics: Conference Series, 1063. pp. 1-6. ISSN 1742-6588
Reddy, V R K and Subbiah, M (2018) On shear instability and propagation of surface gravity waves in sea straits. The European Physical Journal Plus, 133 (475). pp. 1-17. ISSN 2190-5444
Sahoo, Debesh Kumar and Pandey, Ashok Kumar (2018) Performance of non-uniform cantilever based piezoelectric energy harvester. ISSS Journal of Micro and Smart Systems, 7 (1). pp. 1-13. ISSN 2509-7989
Saleem, Abdullah and Farooq, Shamsuzzaman and Karimi, Iftekhar A and Banerjee, Raja (2018) CFD simulation of a full scale LNG storage tank. Computer Aided Chemical Engineering, 44 (1). pp. 883-888. ISSN 1570-7946
Saleem, Abdullah and Farooq, Shamsuzzaman and Karimi, Iftekhar A and Banerjee, Raja (2018) A CFD simulation study of boiling mechanism and BOG generation in a full-scale LNG storage tank. Computers & Chemical Engineering, 115. pp. 112-120. ISSN 0098-1354
Sapkale, Swapnil L and M S, Mahesh and Gupta, Shakti S and Kanade, Shantanu V (2018) Vibroacoustic study of a point-constrained plate mounted in a duct. Journal of Sound and Vibration, 420. pp. 204-226. ISSN 0022-460X
Sharma, Abhay (2018) A fundamental study on qualitatively viable sustainable welding process maps. Journal of Manufacturing Systems, 46. pp. 221-230. ISSN 0278-6125
Wakale, A B and Banerjee, S and Banerjee, Raja (2018) Experimental and chemical kinetic study of the impact of n-butanol blending on the gross engine performance of a CRDI engine. Energy Conversion and Management, 178. pp. 400-414. ISSN 0196-8904
Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M (2018) Optimization of postbuckling behaviour of variable thickness composite panels with variable angle tows: Towards “Buckle-Free” design concept. International Journal of Solids and Structures, 132-13. pp. 66-79. ISSN 00207683
Book Section
Dirbude, Sumer and Kushari, Abhijit and Eswaran, Vinayak (2018) Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions. In: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 73-82. ISBN 9789811326967
Kale, Rakesh and Banerjee, Raja (2018) Spray Collapse in a Multi-hole GDI Injector and Its Effect on In-Cylinder Combustion. In: Two-Phase Flow for Automotive and Power Generation Sectors. Springer Nature, pp. 43-61.
Khaderi, Syed Nizamuddin and Toonder, Jaap MJ den and Onck, Patrick R and et al, . (2018) Numerical simulations of fluid transport by magnetically actuated artificial cilia. In: Atlas of cilia bioengineering and biocomputing. River Publishers, pp. 137-148.
Conference or Workshop Item
Agrawal, M and Katiyar, Rajat Kumar and Sahu, Kirti Chandra and Karri, Badarinath (2018) Experimental investigation of a freely falling liquid drop in air. In: 71st Annual Meeting of the APS Division of Fluid Dynamics, 18–20 November 2018, Atlanta, Georgia.
Aravinth, Dinesh and Shinde, Paritosh and Misra, A and M S, Mahesh (2018) Dynamic Aeroelasticity of a Trapezoidal Wing Using Enhanced Piston Theory. In: 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 8–12 January 2018, Kissimmee, Florida.
Bhagat, A and Gijare, H and Dongari, Nishanth (2018) Computational Analysis of Side Jet Interaction With a Super-sonic Cross-flow. In: Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, 15-17, December 2016, MNNITA, Allahabad, U.P., India.
Biswal, Abinash and Balusamy, Saravanan and Kolhe, Pankaj et. al (2018) Experimental Investigation of Lemon Peel Oil-Gasoline Blends as a Fuel in Spark Ignition Engine. In: Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), 10-12 December 2018, IIT Bombay, Mumbai, India.
Biswal, Abinash and Kale, Rakesh and Kasianantham, Nanthagopal and et al, . (2018) A Comparative Study On Spray and Atomization Behavior Of Lemon Peel Oil And Isooctane In A Gdi Engine Like Conditions. In: FISITA World Automotive Congress 2018, 2-5 October 2018, Chennai, India.
Chaganti, Narendra S and Brooker, Brian T and Olcmen, Semih M and Kolhe, Pankaj (2018) Study of shock wave boundary layer interaction using modal decomposition. In: 2018 AIAA Aerospace Sciences Meeting, 8–12 January 2018, Kissimmee, Florida.
Chandra, Athkuri Sai Saketha and Sharma, Vatsalya and Assam, Ashwani and Eswaran, Vinayak (2018) PERFORMANCE OF CONVECTIVE SCHEMES IN DENSITY BASED SOLVER. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.
D, Veerababu and B, Venkatesham (2018) Acoustic analysis of extended inlet/extended outlet concentric tube resonator using Green’s function. In: 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering.
Deepak, Akiwate and Tanmay, Kolhatkar and Balide, Venkatesham (2018) Free Vibration analysis of circular membrane backed by a cylindrical cavity using Impedance-Mobility Approach. In: 13th Western Pacific Conference on Acoustics (WESPAC-2018), 11 – 15 November 2018, New Delhi, India.
Dixit, Harish Nagaraj and Sharma, P K (2018) Energetics of a droplet bouncing on a superhydrophobic surface. In: 7th International and 45th National conference on fluid mechanics and fluid power, 10-12 December 2018.
Eswaran, Vinayak and Assam, Ashwani and Kalkote, Nikhil Narayan (2018) Application of Adaptive Time-Stepping for Steady/ Unsteady Flows,. In: 10th International Conference on Computational Fluid Dynamics (ICCFD10), 9-13 July 2018, Barcelona,Spain.
Eswaran, Vinayak and Nived, M R (2018) MPI Parallelization of an Explicit Compressible Flow Solver overa Hybrid Unstructured Grid. In: 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), 10-12 December 2018, Mumbay, India.
Eswaran, Vinayak and Nived, M R and Kalkote, Nikhil Narayan and et al, . (2018) Performance of Various Convective Scheme for Hypersonic Flows. In: 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), 10-12 December 2018, Mumbay, India.
Eswaran, Vinayak and Sharma, V and Assam, Ashwani (2018) Investigation of Turbulent Mixing Layer with Compressibility Corrections for RANS Models,. In: 10th International Conference on Computational Fluid Dynamics (ICCFD10), 9-13 july 2018, Barcelona,Spain.
Gijare, H and Bhagat, A and Dongari, Nishanth (2018) EFFECT OF CHEMICAL NON-EQUILIBRIUM ON FLOW PARAMETERS IN THE INTERMEDIATE HYPERSONIC REGIME. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), 27-30, December 2017, BITS-Pilani, Hyderabad.
Gijare, H and Bhagat, A and Dongari, Nishanth (2018) Numerical Analysis of Rarefied Hypersonic and Chemically Reacting Flow-field. In: Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, 15-17, December 2016, MNNITA, Allahabad, U.P., India.
Golla, Siva Teja and Balide, Venkatesham (2018) Preliminary evaluation methodology of car audio system. In: FISITA World Automotive Congress, 2-5 October 2018, Chennai,India.
Golla, Siva Teja and Balide, Venkatesham and Banerjee, Raja (2018) Experimental study on the effect of vertical baffles on liquid sloshing noise in a partially filled rectangular tank under periodic excitation. In: 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, 26-29 August 2018, Chicago; United States.
Guguloth, M N and Dhanalakshmi, S and Murugan, Raju and et al, . (2018) Temperature measurement of low-sooting LPG Diffusion flame using rainbow schlieren deflectometry. In: 7th International and 45th National Fluid Mechanics and Fluid power Conference., 2018.
Hase, Aniket A and Akiwate, Deepak C and B, Venkatesham and et al, . (2018) VIBRATION ANALYSIS OF FLEXIBLE NARROW TUBES USING ACOUSTIC EXCITATION. In: Western Pacific Commission for Acoustics (WESPAC), 11-15 November 2018, New Delhi, India.
Kale, Rakesh and Banerjee, Raja (2018) Investigation of Macroscopic as well as Microscopic Spray Behavior of Multi-hole GDI Injector under Engine Like Hot Injector Body Conditions. In: SAE Technical Paper 2018-01-0280, 2018.
Kalkote, Nikhil Narayan and Eswaran, Vinayak (2018) NUMERICAL COMPUTATION OF NATURAL CONVECTION ON UNSTRUCTURED HYBRID MESH WITHOUT PRECONDITIONING. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.
Mahulikar, S P and Gangoli, R A and Kolhe, Pankaj and et al, . (2018) Engine-Embedded Fuselage's Emissivity Optimization for IR-Signature Reduction of Low Flying Aircraft. In: 1st World Conference on Advanced Materials for Defense, 3-4 September 2018, Guimarães, Portugal.
Mohan, Shashi Ranjan and S, Suryakumar (2018) Fabrication of Gradient Density components through Extrusion based Additive Manufacturing. In: 7th International And 28th All India Manufacturing Technology, Design And Research, 13-15 December 2018, Chennai, India.
Murugan, Raju and Balusamy, Saravanan and Kolhe, Pankaj (2018) Experimental investigation of the spray structure of novel flow blurring twin-fluid atomizer. In: 14th International Conference on Liquid Atomization and Spray Systems (ICLASS), 22-26 July 2018, USA.
Murugan, Raju and Bollu, Bharadwaz and Kolhe, Pankaj (2018) Turbulence measurement in Axisymmetric air jet using the Particle Image Velocimetry. In: 7th International & 45th National Fluid Mechanics and Fluid power conference (FMFP-2018),, 2018, Bombay, India.
Murugan, Raju and Kolhe, Pankaj (2018) Numerical Simulation of Twin Fluid Flow Blurring Atomization Concept Using Large Eddy Simulation. In: the International Conference on Sustainable Energy and Environmental Challenges, 2018, Bangalore,India.
Ramji, M (2018) Progressive failure analysis of flexural loaded CFRP specimen with multiple interacting holes involving 3D finite elements analysis and various non-destructive techniques. In: ICONS, 16 December 2018, Chennai, India.
Sharma, Vatsalya and Assam, Ashwani and Eswaran, Vinayak (2018) NUMERICAL SIMULATION OF TURBULENT HIGH SPEED PLANE JETS- A VALIDATION WITH EXPERIMENTAL RESULTS. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.
Sharma, Vatsalya and Chakraborty, D and Eswaran, Vinayak (2018) Computational Study of Sonic Injection in Supersonic Crossflow. In: 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP),, 10-12 December 2018, Mumbay, India.
Soni, Surendra Kumar and Kumar, P and Kolhe, Pankaj (2018) High speed visualization of the bio derived fuel droplet deformation & breakup in continuous air flows. In: Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), At Indian Institute of Technology Hyderabad, 10-12 December 2018, Mumbai, India.
Sripada, Aditya and Vistapalli, Janardhan and Kumar, R P (2018) Biped Robot Vertical Jumping with Control Constraints. In: IEEE International Conference on Robotics and Biomimetics, ROBIO, 12-15 December 2018, Kuala Lumpur Convention Centre (KLCC) Kuala Lumpur, Malaysia.
Tripathi, Manish and Misra, A and M S, Mahesh (2018) Effect of Rectangular and Airfoil Planar Member Cross-section on Cascade Fin Aerodynamics. In: 2018 AIAA Atmospheric Flight Mechanics Conference, 8–12 January 2018, Kissimmee, Florida.
Veerababu, Dharanalakota and Balide, Venkatesham (2018) Effect of shell compliance on the axial transmission loss of concentric tube resonator. In: 13th Western Pacific Conference on Acoustics (WESPAC-2018), 11 – 15 November 2018, New Delhi, India.
Venkatasubbaiah, K and Satish, N (2018) Effect of Prandtl number and Jet inclination on Flow and Heat Transfer of Double Jet impingement on Stationary and Moving Plate. In: 7th International and 45th National Conference on Fluid Mechanics and Fluid power, 10-12 December 2018, Mumbai, India..
Wakale, A B and Kaira, Shankar Singh and Banerjee, Raja (2018) NUMERICAL SIMULATION OF SPLIT INJECTION USING 105 SPECIES BASED N-DODECANE CHEMICAL KINETIC FLAMELET MODEL FOR DIRECT INJECTION CI ENGINE. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, 27-30 December 2017, BITS Pilani, Hyderabad, India.
Wakale, Anil Bhaurao and Mohamed, Samah Y and Banerjee, Raja and et al, . (2018) An Experimental and Numerical Study of N-Dodecane/Butanol Blends for Compression Ignition Engines. In: SAE World Congress Experience,WCX, 10-12 April 2018, Detroit, United States.
Yoganandh, Madhuranthkam and Nagaraja, Jade and Balide, Venkatesham (2018) A simplified model to predict the transverse transmission loss using radiation efficiency. In: 13th Western Pacific Conference on Acoustics (WESPAC-2018), 11 – 15 November 2018, New Delhi, India.
Thesis
Chandra, Shiv Krishan and M, Ramji (2018) An experimental study on the stability behaviour of curved CFRP panel under axial compression load. Masters thesis, Indian Institute of Technology Hyderabad.
Dsouza, Cyril and K, Venkatasubbaiah (2018) Effect of angle of attack and ow separation control on scramjet inlet using Hybrid RANS/LES. Masters thesis, Indian Institute of Technology Hyderabad.
Eknath, Jagtap Akshay and R, Prasanth Kumar (2018) Generating Trajectories for Biped Robot Vertical Jumping. Masters thesis, Indian Institute of Technology, Hyderabad.
Ghatode, Kishor and Chinthapenta, Viswanath (2018) Computational Modeling of Growth with and without discontinuities in the biological structure. Masters thesis, Indian Institute of Technology Hyderabad.
Hedau, Mridul and S, Suryakumar (2018) Temperature Distribution during Single Pass Multi-Layer Welding in Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.
Jade, Nagaraja and B, Venkatesham (2018) Vibro-Acoustic behaviour of Flexible Rectangular Ducts. PhD thesis, Indian institute of technology Hyderabad.
Jagtap, Rohit shashikant and K, Venkatasubbaiah (2018) Large eddy simulation of tunnel fire with blockage and roof vents. Masters thesis, Indian Institute of Technology Hyderabad.
Jain, Rajeev and Chinthapenta, Viswanath (2018) Interface delamination in stepped lap repaired CFRP panel under tensile loading. Masters thesis, Indian Institute of Technology Hyderabad.
K, Nirmal and M S, Mahesh (2018) Acoustics performance of mufflers with baffles. Masters thesis, Indian Institute of Technology Hyderabad.
K, Varaprasad and Raju, Gangadharan (2018) Experimental and numerical studies on the damage behaviour of open hole CFRP composite specimen subjected to compression. Masters thesis, Indian Institute of Technology Hyderabad.
Kamani, Ravikumar V and B, Venkatesham (2018) Vibro-acoustics analysis of uid-filled shells using the transfer matrix method. Masters thesis, Indian Institute of Technology Hyderabad.
Khandagale, Sudarshan and R, Prasanth Kumar (2018) Development of Plotter Using Parallel Manipulator. Masters thesis, Indian Institute of Technology Hyderabad.
Khare, Vivek Kumar and S, Suryakumar (2018) Thermal Management Approaches for Distortion Control in Metal Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.
M, Sreejith and Khaderi, Syed Nizamuddin (2018) Numerical modelling of fluid structure interaction using fictitious domain method. Masters thesis, Indian Institute of Technology Hyderabad.
Madhuranthakam, Yoganandh and B, Venkatesham (2018) Prediction of Breakout Noise from a Rectangular Duct using SEA and Deterministic methods. Masters thesis, Indian Institute of Technology Hyderabad.
Mahanta, T K and B, Venkatesham (2018) Sound Quality Evaluation of Automotive horn. PhD thesis, Indian institute of technology Hyderabad.
Mathews, Jobin T and Khaderi, Syed Nizamuddin (2018) Implementation of the boundary element method. Masters thesis, Indian Institute of Technology Hyderabad.
Moinuddin, S Q and Sharma, Abhay (2018) ASSESSMENT OF ARC STABILITY AND ITS IMPACT IN ANTI-PHASE SYNCHRONIZED TWIN-WIRE GAS METAL ARC WELDING. PhD thesis, Indian institute of technology Hyderabad.
Nighot, Rohit Prakash and Pandey, Ashok Kumar (2018) Drag force computation in single and arrays of micromechanical beams with uniform and arrow shaped width. Masters thesis, Indian Institute of Technology Hyderabad.
Nived, M R and Eswaran, Vinayak (2018) Parallelization of a Hybrid Unstructured Grid Density-based Flow Solver. Masters thesis, Indian institute of technology Hyderabad.
P, Mastanaiah and Sharma, Abhay (2018) Electron Beam Welding and Friction Stir Welding of Dissimilar Aluminium Alloys (AA2219 and AA5083). PhD thesis, Indian Institute of Technology Hyderabad.
Parchuru, Venkatadri and Chinthapenta, Viswanath (2018) Strain gradient effects on FCC single crystal. Masters thesis, Indian Institute of Technology Hyderabad.
Patil, Sitanshu Vasant and R, Prasanth Kumar (2018) Biped Robot: Design and Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.
Pole, Ramu and Karri, Badarinath (2018) Experimental studies on motion of falling flat thin disk inside liquid. Masters thesis, Indian Institute of Technology Hyderabad.
Rodrigues, Troglio John Allister and R, Prasanth Kumar (2018) Design Assembly and Gait Generation of a Quadruped Robot. Masters thesis, Indian Institute of Technology Hyderabad.
S, Gurucharan and M, Ramji (2018) Progressive damage analysis of CFRP Laminate with circular cutouts under flexural loading. Masters thesis, Indian Institute of Technology Hyderabad.
S, Pavan Reddy and Khaderi, Syed Nizamuddin (2018) Impact analysis on Sandwich structures with steel panels and aluminum foam core. Masters thesis, Indian institute of technology Hyderabad.
S S, Jayakrishnan and Dixit, Harish Nagaraj (2018) On a general method to determine van der Waals interactions in inhomogeneous thin film. Masters thesis, Indian Institute of Technology Hyderabad.
Sahu, Nagesh Kumar and Pandey, Ashok Kumar (2018) Dynamic analysis of structure with bolted joint and identifying joint parameters. Masters thesis, Indian Institute of Technology Hyderabad.
Soni, Sourabh and Chinthapenta, Viswanath (2018) Theoretical and Experimental Characterization of Surface Cracks in FGM and Anisotropic Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.
Thomas, Mithun K and Khaderi, Syed Nizamuddin (2018) Experimental setup of split Hopkinson pressure bar. Masters thesis, Indian Institute of Technology Hyderabad.
Thorat, Satish Prakash and M, Ramji (2018) Study of interaction effect between a line inclusion and a hole using Digital Photoelasticity. Masters thesis, Indian Institute of Technology Hyderabad.
Vistapalli, Janardhan and R, Prasanth Kumar (2018) Generating Trajectories for Wide Ditch Crossing of Biped Robots. PhD thesis, Indian Institute of Technology, Hyderabad.
Other
IIT, Hyderabad (2018) IIT-incubated startup to roll out cheaper lithium batteries. The Hindu, Hyderabad.