Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2017
Up a level |
A
A R, Premlata and Sharaf, Dilin and Tripathi, Manoj and Karri, Badarinath and Sahu, Kirti Chandra (2017) Shapes and paths of an air bubble rising in quiescent liquids. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.
Agawane, G and Jadon, Varun and B, Venkatesham and Banerjee, Raja (2017) An Experimental Study of Sloshing Noise in a Partially Filled Rectangular Tank. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (2). ISSN 1946-4002 (In Press)
Amogh, R N and Mahanta, T K and B, Venkatesham (2017) Free vibration analysis of circular membrane backed by cylinder cavity using mode coupling approach. In: ICOVP, 13th International Conference on Vibration Problems, 29th November-2nd December, IIT Guwahati.
Angwani, Vikas (2017) Numerical investigation of deformation and evaporation of a volatile ethanol droplet under high-temperature conditions. Masters thesis, Indian Institute of Technology Hyderabad.
Assam, A and Kalkote, Nikhil Narayan and Dongari, Nishanth and Eswaran, Vinayak (2017) Computation of Rarefied Gas Flows in Nano/micro Devices using an Indigeneous Developed Computational Fluid Dynamics Solver. In: Proceedings of the International Conference on Nanotechnology, Ideas, Innovations & Initiatives (ICN:3I),, 6-8 December 2017, IIT Roorkee, India.
B
Balu, Kumthekar Nitin and S, Suryakumar (2017) Experimental Studies on Assessment and Reduction of Surface Waviness for Weld Deposition based Additive Manufacturing. Masters thesis, Indian institute of technology Hyderabad.
Bansal, A and Lingam, R and Yadav, S K and Reddy, N Venkata (2017) Prediction of forming forces in single point incremental forming. Journal of Manufacturing Processes, 28 (3-SI). pp. 486-193. ISSN 1526-6125
Bhagat, A and Gijare, H and Dongari, Nishanth (2017) Numerical investigation of multi-species under-expanded sonic jets. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.
C
Chaitanya Sagar, T and Chinthapenta, Viswanath (2017) Lower and Upper Bound Estimates of Material Properties of Pristine Graphene: Using Quantum Espresso. In: Advances in Structural Integrity. Springer, Singapore, pp. 253-265. ISBN 978-981-10-7197-3
Chandran, Navaneeth T (2017) Detecting and locating delamination in stiffened panels using 3D digital image correlation technique. Masters thesis, Indian Institute of Technology Hyderabad.
Chelimilla, Sneha and Vyasarayani, C P and Khaderi, Syed Nizamuddin (2017) Phononic Bandgaps in Two-Dimensional Periodic Structures. Masters thesis, Indian Institute of Technology Hyderabad.
Choudhury, Sanatan and Sharma, Abhay and Mohanty, Uttam Kumar and Kasai, Ryu and Komura, Masaharu and Tanaka, Manabu and Suga, Tetsuo (2017) Mathematical model of complex weld penetration profile: A case of square AC waveform arc welding. Journal of Manufacturing Processes, 30. pp. 483-491. ISSN 1526-6125
D
D, Veerababu and B, Venkatesham (2017) Three-dimensional acoustic analysis of concentric tube resonator using green's function. In: 24th International Congress on Sound and Vibration (ICSV), 23-27 July, 2017, London; United Kingdom.
Das, Sukanta and Reddy, Naresh and Raju, Gangadharan (2017) Damage Growth Study in Unidirectional CFRP Composites Using Infrared Thermography. Springer, Singapore, pp. 673-684.
De, A K and Eswaran, Vinayak (2017) Scalings of heat transport and energy spectra of turbulent Rayleigh-Benard convection in a large-aspect-ratio box. International Journal of Heat and Fluid Flow, 67. pp. 111-124. ISSN 0142-727X
Duryodhan, V S and Singh, Shiv Govind and Agarwal, Anil (2017) Effect of Cross Aspect Ratio on Flow in Diverging and Converging Microchannels. Journal of Fluids Engineering, 139 (6). 061203. ISSN 0098-2202
E
Edara, Satyavardhana Rao (2017) Numerical and Experimental Evaluation of Lamb Wave Dispersion curves in Composite Laminates. Masters thesis, Indian Institute of Technology Hyderabad.
F
Fleck, N A and Khaderi, Syed Nizamuddin and McMeeking, R M and Arzt, E (2017) Cohesive detachment of an elastic pillar from a dissimilar substrate. Journal of the Mechanics and Physics of Solids, 101. pp. 30-43. ISSN 00225096
G
G, Pradeep and T, Thanigaivel Raja and D, Veerababu and B, Venkatesham (2017) Numerical Prediction of Perforated tube acoustic impedance. In: 24th International Conference on Sound and Vibration, London, 23-27 July, 2017.
H
Hoskoti, L and Misra, A and Sucheendran, M (2017) Interaction of nonlinear normal modes of a cantilever beam. In: 24th International Congress on Sound and Vibration (ICSV), 23-27 July, 2017, London; United Kingdom.
I
Iyer, Balaji V S and Dixit, Harish Nagaraj (2017) Complex Fluids Meeting (CompFlu@Hyd 2016) HYDERABAD, INDIA DECEMBER 12-14, 2016. Applied Rheology, 27 (4). ISSN 1430-6395
J
Jadhav, Aakash and Vyasarayani, Chandrika Prakash (2017) Sound Radiation Due To Impacted Plates. Masters thesis, Indian Instiute of Technology Hyderabad.
Jadhav, Pramod D (2017) Uncertainty estimations in external flow using Computational fluid Dynamics (CFD). Masters thesis, Inidian Institute of Technology Hyderabad.
Jaiswal, S and Reddy, R and Banerjee, Raja and Sato, S and Komagata, D and Ando, M and Okada, J (2017) An efficient GPU parallelization for arbitrary collocated polyhedral finite volume grids and its application to incompressible fluid flows. In: International Conference on High Performance Computing Workshops, HiPCW, 19-22 December 2016, Hyderabad; India.
Janardhanan, V and R, Prasanth Kumar (2017) Online trajectory generation for wide ditch crossing of biped robots using control constraints. Robotics and Autonomous Systems. ISSN 0921-8890 (In Press)
K
K, Santhan Reddy and Sharma, Abhay (2017) A computational approach to achieve uniform mechanical properties along the built-up direction in WAAM component. Masters thesis, Indian institute of technology Hyderabad.
K, Sobhith and Raju, Gangadharan (2017) Study of Delamination, Matrix/fiber damage in CFRP under bending using Acoustic Emission and Cohensive Zone technique. Masters thesis, Indian Institute of Technology Hyderabad.
Kaira, Shankar Singh and Banerjee, Raja (2017) CFD Modeling of Non-premixed Combustion Inside a Diesel Engine. Masters thesis, Indian Insitute of Technology Hyderabad.
Kale, Rakesh and Banerjee, Raja (2017) Influence of Engine like Conditions on Macroscopic as well as Microscopic Spray Behavior of GDI Injector Using Isooctane and Alcohols. In: SAE World Congress Experience, WCX 2017;, 4-6 April 2017, United States.
Kandala, Shanti Swaroop and Maduri, Abhivamshi and Vyasarayani, C P (2017) Galerkin Approximations for Thermoacoustic Instability in a Rijke's Tube. Procedia IUTAM, 22. pp. 168-175. ISSN 2210-9838
Kandan, K and Khaderi, Syed Nizamuddin and Wadley, H N G and Deshpande, V S (2017) Surface instabilities in shock loaded granular media. Journal of the Mechanics and Physics of Solids, 109. pp. 217-240. ISSN 0022-5096
Kannan, Y S and B, Saravanan and Karri, Badarinath and Sahu, Kirti Chandra (2017) Effect of viscosity on the dynamics of a spark-generated non-equilibrium bubble in free-field and near a free-surface. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.
Karri, Badarinath and A R, Premlata and Tripathi, Manoj and Sahu, Kirti Chandra (2017) Numerical and experimental investigations of an air bubble rising in a Carreau-Yasuda shear-thinning liquid. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.
Keskar, Harshad and B, Venkatesham (2017) Transmission loss characteristics of an annular cavity with arbitrary port locations using Green's function method. The Journal of the Acoustical Society of America, 142 (3). pp. 1350-1361. ISSN 0001-4966
Kumar, Mayank and Banerjee, Raja and Mangadoddy, Narasihmha (2017) Development of GPU Parallel Multiphase flow solver for turbulent slurry flows in cyclone. In: 12th International Conference on CFD in Oil & Gas, Metallurgical and Process Industries, 30th May - 1st June, 2017, SINTEF, Trondheim, NORWAY.
Kumar, Sachin and Reddy, N Venkata (2017) Electric Pulse Aided Bending: An Experimental Study. Masters thesis, Indian institute of technology Hyderabad.
L
Lingam, R and Bansal, Ankush and I, Om Prakash and Reddy, N Venkata (2017) Mechanics based Integrated Product and Process Design for Incremental Forming. Journal of Manufacturing Science and Engineering. ISSN 1087-1357
M
M Adinarayanappa, S and Simhambhatla, S and Campbell, R. Ian and Gibson, Ian (2017) Twin-wire welding based additive manufacturing (TWAM): manufacture of functionally gradient objects. Rapid Prototyping Journal, 23 (5). pp. 858-868. ISSN 1355-2546
Mahanta, T K and B, Venkatesham (2017) Evaluation of disc and shell horns sound quality characteristics. The Journal of Acoustical Society of India, 44 (2). pp. 112-124.
Mahato, Uttam Kumar and R, Prasanth Kumar (2017) Optimal energy consumption of a biped robotfor crossing a wide ditch. Masters thesis, Indian Insitute of Technology Hyderabad.
Matta, Seshadri and Chinthapenta, Viswanath and Ramji, M (2017) A novel approach to analyse adhesive layer strain field in a stepped lap repaired carbon fiber reinforced polymer panel using digital image correlation. Journal of Adhesion Science and Technology, 31 (19-20). pp. 2180-2201. ISSN 0169-4243
Md, Yousuf Ahmed and Appam, N and Md, Nayeemuddin and Md, Ahmed and Md, Abdullah (2017) Design and Simulation of Solar Car. International Journal of Scientific Research in Science, Engineering and Technology, 3 (2). pp. 373-377. ISSN 2395 - 1990
Mohanty, Uttam Kumar and Rana, Jaydev and Sharma, Abhay (2017) Multi-objective optimization of electro-discharge machining (EDM) parameter for sustainable machining. Materials Today: Proceedings, 4 (8). pp. 9147-9157. ISSN 2214-7853
Mudhangulla, Sridhar Babu (2017) Study of Stick-Slip in a Torsional Drill bit Using Neutral Delay Differential Equations. Masters thesis, Indian Institute of Technology Hyderabad.
Murugesan, Meenatchidevi and B, Saravanan and Hochgreb, Simone and Li, Larry K B (2017) Recurrence analysis of forced synchronization in a self-excited thermoacoustic system. In: International Congress on Sound and Vibration, 23-27, July 2017, London.
N
N, Rajesh and K, Venkatasubbaiah (2017) Two-phase analysis on the conjugate heat transfer performance of microchannel with Cu, Al, SWCNT and hybrid nanofluids. Journal of Thermal Science and Engineering Applications, 9 (4). 041011-041021. ISSN 1948-5085
N K, Muhammad Shuaib and M, Ramji and Kolanu, Naresh Reddy and Raju, Gangadharan (2017) FEA and Experimental Analysis on Buckling and Post-buckling Behavior of CFRP Composite Panel Using Digital Image Correlation Technique. In: Advances in Structural Integrity. Springer, pp. 527-537.
Nayak, Mahesh Guguloth and Murugan, Raju and Kolhe, Pankaj (2017) Numerical investigation of laminar and transitional hydrogen gas-jet diffusion flame. In: Proceedings of National Aerospace Propulsion conference, 2017, IIT Kanpur, India.
Nimje, Yashdeep P and Raju, Gangadharan (2017) Partial Delamination Detection and Quantification in Composite Laminates Using Laser Doppler Vibrometer. In: First Structural Integrity Conference and Exhibition (SICE-2016), 4-6 July 2016, Bangalore, India.
Nimmagadda, Rajesh (2017) Experimental and numerical study on the heat transfer performance of nanofluids in micro-channel and mini-enclosure. PhD thesis, Indian Institute of Technology Hyderabad.
P
Pal, Bijoy and Khaderi, Syed Nizamuddin (2017) Mechanical properties of the idealized inverse opal lattice. Masters thesis, Indian Institute of Technology Hyderabad.
Panaskar, N J and Sharma, Abhay (2017) Combined Cold Expansion and Friction Stir Processing of Fastener Holes in Aluminum Alloy Al-2014-T6. Transactions of the Indian Institute of Metals, 70 (1). pp. 107-114. ISSN 0972-2815
Panchagnula, Jayaprakash Sharma and S, Suryakumar (2017) Additive manufacturing of complex metallic objects with overhanging features: slicing and path planning strategies. PhD thesis, Indian institute of technology Hyderabad.
Pandey, Ashok Kumar and Gangele, Aparna (2017) Vibrational Characteristics of Functionally Graded Graphene-silicon Nanosheet Composites. In: Proceedings of the International Conference on Nanotechnology: Ideas, Innovations and Initiatives, 6-8 December 2017, IIT Roorkee, India.
Pandya, Pankaj and Chinthapenta, Viswanath (2017) Investigation of Single Fiber Composite residual strength pre and post fragmentation: Using Progressive Damage Analysis and HFGMC framework. PhD thesis, Indian institute of technology Hyderabad.
Patil, P and Khaderi, Syed Nizamuddin and M, Ramji (2017) Numerical estimation of strain intensity factors at the tip of a rigid line inclusion embedded in a finite matrix. Engineering Fracture Mechanics, 172. pp. 215-230. ISSN 0013-7944
Patil, P and Vyasarayani, C P and M, Ramji (2017) Linear least squares approach for evaluating crack tip fracture parameters using isochromatic and isoclinic data from digital photoelasticity. Optics and Lasers in Engineering, 93. pp. 182-194. ISSN 0143-8166
Patil, Prataprao and Khaderi, Syed Nizamuddin and M, Ramji (2017) Strain Intensity Factor and Interaction of Parallel Rigid Line Inclusion in Elastic Matrix Using FEA. In: Advances in Structural Integrity. Springer, Singapore, pp. 315-322. ISBN 9789811071966
Patil, Prataprao and Khaderi, Syed Nizamuddin and M, Ramji (2017) Strain Intensity Factor and Interaction of Parallel Rigid Line Inclusion in Elastic Matrix Using FEA. In: First Structural Integrity Conference and Exhibition (SICE-2016), 4-6 July 2016, Bangalore, India.
Premlata, A R and Tripathi, M K and Karri, Badarinath and Sahu, Kirti Chandra (2017) Numerical and experimental investigations of an air bubble rising in a Carreau-Yasuda shear-thinning liquid. Physics of Fluids, 29 (3). ISSN 1070-6631
Q
Quah, Edmund Wenjie and Karri, Badarinath and Ohl, Siew-Wan and Klaseboer, Evert and Khoo, Boo Cheong (2017) Expansion and collapse of an initially off-centered bubble within a narrow gap and the effect of a free surface. International Journal of Multiphase Flow. ISSN 0301-9322 (In Press)
R
Reddy, N H and Saxena, Prashant (2017) Limit points in the free inflation of a magnetoelastic toroidal membrane. International Journal of Non-Linear Mechanics, 95. pp. 248-263. ISSN 0020-7462
Reddy, Narravula Harshavardhan and Saxena, Prashant (2017) Instabilities in the axisymmetric magnetoelastic deformation of a cylindrical membrane. International Journal of Solids and Structures. ISSN 0020-7683 (In Press)
Reddy, Rajesh and Banerjee, Raja (2017) Direct Simulations of Liquid Sheet Breakup in Planar Gas Blast Atomization. Atomization and Sprays, 27 (2). pp. 95-116. ISSN 1044-5110
S
S, Bibin and Pandey, Ashok Kumar (2017) A Hybrid Approach to Model the Temperature Effect in Tire Forces and Moments. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (1). pp. 25-37. ISSN 1946-4002
S, Chetan and Khaderi, Syed Nizamuddin (2017) Numerical modelling of fluid-structure interaction using fictitious domain method: application towards compressible fluid flow. Masters thesis, Indian Insitute of Technology Hyderabad.
Sahu, Kirti Chandra and Agrawal, Meenu and A R, Premlata and Tripathi, Manoj and Karri, Badarinath (2017) Nonspherical liquid droplet falling in air. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.
Saxena, Prashant (2017) Finite deformations and incremental axisymmetric motions of a magnetoelastic tube. Mathematics and Mechanics of Solids. p. 108128651769750. ISSN 1081-2865
Seshadri, Matta and Ramji, M (2017) Numerical and Experimental Analysis of Double-Sided Stepped Lap-Repaired CFRP Laminates Under Tensile Loading. In: First Structural Integrity Conference and Exhibition (SICE-2016), 4-6 July 2016, Bangalore, India.
Sharma, Abhay and Bandari, V and Ito, K and Kohama, K and M, Ramji and Himasekhar, H S (2017) A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing. Journal of Manufacturing Processes, 26. pp. 122-130. ISSN 1526-6125
Somashekara, M A and Naveenkumar, M and Kumar, A and Chinthapenta, Viswanath and S, Suryakumar (2017) Investigations into effect of weld-deposition pattern on residual stress evolution for metallic additive manufacturing. International Journal of Advanced Manufacturing Technology, 90 (5-8). pp. 2009-2025. ISSN 0268-3768
Somashekara, M A and Simhambhatla, S (2017) Studies on Dissimilar Twin-Wire Weld-Deposition for Additive Manufacturing Applications. Transactions of the Indian Institute of Metals, 70 (8). pp. 2123-2135. ISSN 0972-2815
Surya, S and Vyasarayani, C P and Kalmár-Nagy, T (2017) Homotopy continuation for characteristic roots of delay differential equations using the Lambert W function. Journal of Vibration and Control. p. 107754631771762. ISSN 1077-5463 (In Press)
T
Tripathy, Swaraj Kumar and Raju, Gangadharan (2017) Stress Concentration/Intensity Factor Determination Using Thermo-Elastic Stress Analysis (TSA). Masters thesis, Indian Institute of Technology Hyderabad.
U
Umashankar, Hariharan and Kalpathy, Sreeram and Dixit, Harish Nagaraj (2017) Stability of thin liquid films containing surface active particles. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.
V
V, Janardhan and R, Prasanth Kumar (2017) Generating Feasible Solutions for Dynamically Crossing a Wide Ditch by a Biped Robot. Journal of Intelligent & Robotic Systems, 88 (1). pp. 37-56. ISSN 0921-0296
V, Nidheesh and B, Venkatesham (2017) Effect of Joint Distortions on Breakout Noise from a Flexible Rectangular Duct. Masters thesis, Indian Institute of Technology Hyderabad.
Vemula, Sai Theja and Khaderi, Syed Nizamuddin (2017) A simple model to estimate the velocity of sand during explosion in sand. Masters thesis, Indian Institute of Technology Hyderabad.
Vivek, Atul S and Dixit, Harish Nagaraj (2017) On the Stability of Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.
Y
Yang, L and Gong, Z and Lin, Y and Chinthapenta, Viswanath and Li, Q and Webster, T J and Sheldon, B W (2017) Disordered Topography Mediates Filopodial Extension and Morphology of Cells on Stiff Materials. Advanced Functional Materials. p. 1702689. ISSN 1616-301X (In Press)