Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2016
Up a level |
A
Adinarayanappa, S M and M, Naveenkumar and Kumar, A and Chinthapenta, Viswanath (2016) Thermo-Mechanical Modelling of Arc Welding. In: Globalization in Joining Technology and Material Science, JWRI Osaka University, Japan.
Adinath, Kangude Prasad (2016) Development of Thermodynamic Model for Conventional SI Engine Simulation and Detailed Testing Analysis of a Lean Combustion in PFI SI Engine. Masters thesis, Indian Institute of Technology Hyderabad.
Ahsan, Zaid and Uchida, T K and Vyasarayani, C P (2016) Adaptive sparse Galerkin methods for vibrating continuous structures. Transactions of the Canadian Society for Mechanical Engineering, 40 (1). pp. 19-29. ISSN 0315-8977
Akiwate, Deepak C and Balide, Venkatesham (2016) Measurement of acoustical performance parameters of thin walled narrow tube periodic structures. In: International Symposium on Acoustics for Engineering Applications, NSA 2016, 17- 19 November 2016, Gurgaon, India.
Amogh, R N and Mahanta, T K and B, Venkatesham (2016) Structural-acoustic coupling of circular membrane backed by cylinder cavity using mode coupling approach. In: 2nd Australasian Acoustical Societies Conference, ACOUSTICS, 9-11, November 2016, Brisbane; Australia.
Ansari, S and Date, M and Simhambhatla, S and Rath, Subha Narayan (2016) A Review of Hydrogels in Droplet-based Bio-Fabrication Techniques. In: 2nd International Conference on Digital Fabrication (ICDF 2016), 3-5 Mar, 2016, Tokyo, Japan.
Anwar, Sadath and Dixit, Harish Nagaraj and Vyasarayani, Chandrika Prakash (2016) Dynamics of Cross-Flow Heat Exchanger Tubes With Multiple Loose Supports. Journal of Pressure Vessel Technology, 138 (5). 051303-1. ISSN 0094-9930
Aravinth, Dinesh and M S, Mahesh (2016) Aeroelastic stability of delta wing configuration. In: 6th International Congress on Computational Mechanics and Simulation, 27 June - 1 July 2016, IIT Bombay, Powai, Maharashtra, India.
B
Banerjee, N and Sharma, Abhay (2016) Development of a friction model and its application in finite element analysis of minimum quantity lubrication machining of Ti-6Al-4 V. Journal of Materials Processing Technology, 238. pp. 181-194. ISSN 0924-0136
D
Dixit, R and R, Prasanth Kumar (2016) Working and Limitations of Cable Stiffening in Flexible Link Manipulators. Advances in Acoustics and Vibration, 2016. pp. 1-9. ISSN 1687-6261
G
G, Vamsi Krishna (2016) Dynamic behavior of structures with bolted joints. Masters thesis, Indian Institute of Technology Hyderabad.
Gijare, H and Assam, A and Dongari, Nishanth (2016) Aero-Thermodynamics Optimization of Re-Entry Capsule in the Slip Flow Regime. In: Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC, 17-20 December, 2015, Thiruvananthapuram, India.
Gopalan, K S and Eswaran, Vinayak (2016) Numerical investigation of thermal performance of PCM based heat sink using structured porous media as thermal conductivity enhancers. International Journal of Thermal Sciences, 104. pp. 266-280. ISSN 1290-0729
H
Holay, Sarang Abhay (2016) Developing a 3D incompressible vof based multiphase solver using OpenFOAM libraries. Masters thesis, Indian Institute of Technology Hyderabad.
Hoskoti, Lokanna and M S, Mahesh (2016) Explicit Time Marching Coupling Schemes for Fluid structure Interactions. In: 6th International Congress on Computational Mechanics and Simulation, 27 June - 1 July 2016, IIT Bombay, Powai, Maharashtra, India.
I
Imam, M and Racherla, V and Biswas, K and Fujii, H and Chinthapenta, Viswanath and Sun, Yufeng and Morisada, Yoshiaki (2016) Microstructure-property relation and evolution in friction stir welding of naturally aged 6063 aluminium alloy. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (In Press)
J
Jade, Nagaraja and Balide, Venkatesham (2016) Application of NAH method for the prediction of sound radiation from a flexible box structure. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Hamburg Germany.
Jade, Nagaraja and Nidheesh, V and Balide, Venkatesham (2016) Reconstruction of Vibration Velocity on a Flexible Rectangular Duct by Using Inverse Numerical Acoustic Technique. In: International Symposium on Acoustics for Engineering Applications, NSA 2016, 17- 19 November 2016, Gurgaon, India.
Ji, J and Bi, Y B and K, Venkatasubbaiah and Li, K Y (2016) Influence of aspect ratio of tunnel on smoke temperature distribution under ceiling in near field of fire source. Applied Thermal Engineering, 106. pp. 1094-1102. ISSN 1359-4311
Jose, M J and Kumar, S S and Sharma, Abhay (2016) Vibration assisted welding processes and their influence on quality of welds. Science and Technology of Welding and Joining, 21 (4). pp. 243-258. ISSN 1362-1718
K
K, Nageswararao and Karri, Badarinath (2016) Fish hook in classifier efficiency curves: An update. Separation and Purification Technology, 158. pp. 31-38. ISSN 1383-5866
K P, Karunakaran and Simhambhatla, S and U, Chandrasekhar and A, Bernard (2016) Hybrid rapid manufacturing of metallic objects. International Journal of Rapid Manufacturing, 1 (4). p. 2016. ISSN 1757-8817
Kale, Rakesh and Banerjee, Raja (2016) Liquid and Vapour Penetration Length Estimation for GDI Spray of Iso-octane and Alcohols at Elevated Pressure and Temperature Conditions. In: 18th Annual Conference on Liquid Atomization and Spray Systems – Asia (ILASS), 6-9 November 2016, Chennai, India.
Kalkote, Nikhil Narayan and Eswaran, Vinayak (2016) Supersonic biplane: Cheaper, quieter and fuel efficient supersonic travel. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP), 10-12 December 2016, MNIT, Alahabad.
Kambali, P N and Pandey, Ashok Kumar (2016) Nonlinear coupling of transverse modes of a fixed–fixed microbeam under direct and parametric excitation. Nonlinear Dynamics, 87 (2). pp. 1271-1294. ISSN 0924-090X
Kambali, Prashant N and Pandey, Ashok Kumar (2016) Linear and Nonlinear Frequency Analysis of Single and Multibeam MEMS Arrays. PhD thesis, Indian Institute of Technology Hyderabad.
Karandikar, Aniket (2016) Numerical Analysis of Melting and Melt Flow Behaviour in Extrusion Deposition Process. Masters thesis, Indian Institute of Technology Hyderabad.
Khan, Imran (2016) Modelling of temperature profiles for the plunge stage of friction stir welding process. Masters thesis, Indian Institute of Technology Hyderabad.
Kolanu, Naresh Reddy and Andraju, Lala Bahadur and Ramji, M and Raju, Gangadharan (2016) Damage assessment of single blade stiffened CFRP Specimen subjected to axial compression Using AE and DIC techniques. In: Eigth International Symposium on NDT in Aerospace, 3-4 November 2016, IISc Bangalore, India.
Kumar, S S and Kolhe, Pankaj (2016) High fidelity simulations of binary collisions of dissimilar size drops. In: drops,Proceedings of National Aerospace Propulsion conference, 2017, IIT Kanpur , India.
M
M A, Somashekara and S, Suryakumar (2016) MANUFACTURE OF FUNCTIONALLY GRADIENT OBJECTS THROUGH WELD-DEPOSITION. PhD thesis, Indian institute of technology Hyderabad.
Mahanta, T K and Kumar, G Anvesh and B, Venkatesham (2016) Vibro-acoustic analysis of automotive horn diaphragm backed by air cavity. In: International symposium on Acoustics for Engineering Applications,Proceedings of NSA, 17-19 November 2016, Gurgaon, India.
Moinuddin, S Q and Sharma, Abhay (2016) Melting Efficiency in Anti-Phase Synchronized Twin-wire Gas Metal Arc Welding. In: 10th International Conference on Trends in Welding Research, 11 -14 October 2016, Tokyo, Japan.
N
N, Satish and K, Venkatasubbaiah and R, Harish and Sengupta, T K and Lele, S K and Sreenivasan, K R and Davidson, P A (2016) Effect of Buoyancy on Turbulent Mixed Convection Flow Through Vertical and Horizontal Channels. In: IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Dec 15-18, 2014, Goa, India.
Nimmagadda, R and K, Venkatasubbaiah (2016) Numerical investigation on conjugate heat transfer performance of micro-channel using sphericity based gold and carbon nanoparticles. Heat Transfer Engineering. ISSN 0145-7632 (In Press)
Nimmagadda, R and Venkatasubbaiah, K (2016) Multiphase Approach on Heat Transfer Performance of Micro-channel using Hybrid Carbon Nanofluid. In: 13TH ASME International Conference on Nanochannels, Microchannels, and Minichannels, JUL 06-09, 2015, San Francisco, CA.
P
P, Mastanaiah and Sharma, Abhay and Reddy, G M (2016) Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties. Transactions of the Indian Institute of Metals, 69 (7). pp. 1397-1415. ISSN 0972-2815
Panchagnula, Jayaprakash Sharma and Sharma, Abhay and Simhambhatla, S (2016) Thermal management in manufacture of thin-walled components produced by arc-based additive manufacturing. In: 10th International Conference on Trends in Welding Research, 11 -14 October 2016, Tokyo, Japan.
Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Additive Manufacturing of Complex Shapes Through Weld-Deposition and Feature Based Slicing. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Nov 13-19, 2015, Houston, TX.
Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Feature based Weld-Deposition for Additive Manufacturing of Complex Shapes. Journal of The Institution of Engineers (India): Series C. pp. 1-8. ISSN 2250-0545 (In Press)
R
R, Harish and K, Venkatasubbaiah (2016) Non-Boussinesq approach for turbulent buoyant flows in enclosure with horizontal vent and forced inlet port. Applied Mathematical Modelling, 40 (2). pp. 927-941. ISSN 0307-904X
R, Lingam and O, Prakash and Belk, J H and Reddy, N Venkata (2016) Automatic feature recognition and tool path strategies for enhancing accuracy in double sided incremental forming. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768
Raviprolu, Praveena and Jade, Nagaraja and B, Venkatesham (2016) Sound Radiation Characteristics of a Rectangular Duct with Flexible Walls. Advances in Acoustics and Vibration, 2016. pp. 1-15. ISSN 1687-6261 (In Press)
Reddy, S Rajesh and Banerjee, Raja (2016) Numerical Study of Liquid Sheet Atomization Using Two-Phase Flow Solver on GPU Architecture. PhD thesis, Indian Institute of Technology Hyderabad.
Reddy, V and Balide, Venkatesham (2016) Prediction of Acoustic Natural Frequencies for two dimensional simplified aircraft cabin by Impedance Mobility and Compact Matrix(IMCM) approach. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Hamburg Germany.
S
Sapkale, Swapnil L and M S, Mahesh and Gupta, Shakti S (2016) Response of an elastic plate with a constrained interior point under the effect of grazing sound. In: 6th International Congress on Computational Mechanics and Simulation, 27 June - 1 July 2016, IIT Bombay, Powai, Maharashtra, India.
Sarang, H and Reddy, S R and Shashank, J and Banerjee, Raja (2016) High fidelity simulations of binary collisions of liquid drops. In: 18th Annual Conference on Liquid Atomization and Spray Systems – Asia (ILASS), 6-9 November 2016, Chennai, India.
Saritha, G and Balide, Venkatesham (2016) Numerical Study of Bubble Dynamics Using a High Density Pseudo potential Lattice Boltzmann Method. In: 1st International and 18th National ISME Conference (ISME 18), 23-25 February 2017, Warangal, India.
Sharma, Abhay (2016) A comparative study on mechanical properties of single- and twin-wire welded joints through multi-objective meta-heuristic optimisation. International Journal of Manufacturing Research, 11 (4). pp. 374-393. ISSN 1750-0591
Sharma, Abhay and Suryakumar, S and Sharma, Jayaprakash and et al, . (2016) Investigation on Cooling Strategies during Wire Arc Additive Layer Manufacturing. In: Visual-JW 2016, 17 -18 October 2016, Osaka.
Sharma, Abhay and Verma, D K and Arora, N (2016) A scheme of comprehensive assessment of weld bead geometry. International Journal of Advanced Manufacturing Technology, 82 (9). pp. 1507-1515. ISSN 0268-3768
Singh, S G and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem (2016) Precise identification of < 1 0 0 > directions on Si{001} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317
Singh, S S and Pal, Prem and Pandey, Ashok Kumar (2016) Mass Sensitivity of Nonuniform Microcantilever Beams. Journal of Vibration and Acoustics, 138 (6). ISSN 1048-9002
Singh, S S and Pal, Prem and Pandey, Ashok Kumar and Xing, Y and Sato, K (2016) Determination of precise crystallographic directions for mask alignment in wet bulk micromachining for MEMS. Micro and Nano Systems Letters, 4 (5). pp. 1-29. ISSN 2213-9621
Singh, S S and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem (2016) Precise identification of <1 0 0> directions on Si{0 0 1} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317
Singh, Sajal Sagar and Pal, Prem and Pandey, Ashok Kumar (2016) Highly sensitive microelectromechanical mass sensor with non-uniform beams. In: 13th International workshop on nanomechanical sensing, 22-24 June 2016, Delft, The Netherlands.
T
Tripathi, Manish and M S, Mahesh and Misra, A (2016) CFD simulation of cascade fin flow at low subsonic speeds and high angles of attack. In: 6th International Congress on Computational Mechanics and Simulation, 27 June - 1 July 2016, IIT Bombay, Powai, Maharashtra, India.
V
Vishwakarma, S D and Pandey, Ashok Kumar and Parpia, J M et. al. (2016) Size modulated transition in the fluid–structure interaction losses in nano mechanical beam resonators. Journal of Applied Physics, 119 (19). p. 194303. ISSN 0021-8979
Y
Yarlagadda, Madhava Ramesh Babu and Ramji, M and Raju, Gangadharan (2016) Experimental study on buckling behavior of CFRP stiffened panels involving digital image correlation. In: First Structural Integrity Conference and Exhibition (SICE-2016), 4-6 July 2016, Bangalore, India.