Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2013

A

Asgar, J and Lingam, R and Reddy, V N (2013) Tool path influence on electric pulse aided deformation during incremental sheet metal forming. In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 6–10 January 2014, Melbourne, Australia.

B

B, Venkatesham (2013) Acoustic-Structural Coupled Analysis of a Flexible Rectangular Duct. In: 20th International Congress on Sound and Vibration 2013, ICSV 2013, 7-11 July 2013, Bangkok; Thailand.

B, Venkatesham (2013) Acoustical Performance of a Circular Expansion Chamber with Yielding Walls. In: ACOUSTIS2013, 10-15 november 2013, New Delhi, India.

Baghel, A K (2013) Cfd Study of Sloshing in Rectunglar Tank. Masters thesis, Indian Institute of Technology Hyderabad.

Banerjee, Raja (2013) Numerical investigation of evaporation of a single ethanol/iso-octane droplet. Fuel, 107. pp. 724-739. ISSN 0016-2361

Bhise, V S (2013) Application of DIC in Solid Mechanics. Masters thesis, Indian Institute of Technology Hyderabad.

D

Dixit, Harish Nagaraj and Homsy, G M (2013) The elastocapillary Landau-Levich problem. Journal of Fluid Mechanics, 735. pp. 1-28. ISSN 0022-1120

Duryodhan, V S and Singh, Shiv Govind and Agrawal, A (2013) Liquid flow through a diverging microchannel. Microfluidics and Nanofluidics, 14 (1-2). pp. 53-67. ISSN 1613-4982

G

Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2013) Effect of a magnetic field on natural convection in a curved geometry. In: ISHMT-ASME Heat and Mass Transfer Conference, 28-31 december, IIt Kharagpur, India.

Garala, Sathish Kumar and Kambali, P N and Pandey, Ashok Kumar (2013) A hybrid approach for the modal analysis of graphene and carbon nanotubes. In: 17th IWPSD, 10-13 December 2013, Noida India.

Gyanadutta, S (2013) Linear and Nonlinear Analysis of DC Biased Coupled Microbeams. Masters thesis, Indian Institute of Technology Hyderabad.

Gyanadutta, S and Pandey, Ashok Kumar (2013) Nonlinear response of coupled transverse modes of a Nanoresonator. In: 17th International Workshop on Physics of Semiconductor Devices IWPSD, 10-13 December 2013, Noida, India.

H

Harish, R and Venkatasubbaiah, K (2013) Mathematical modeling and computation of fire induced turbulent flow in partial enclosures. Applied Mathematical Modelling, 37 (23). pp. 9732-9746. ISSN 0307-904X

Harish, R and Venkatasubbaiah, K (2013) Transport phenomena of turbulent fire spread through compartment connected to vertical shaft in tall building. Fire Safety Journal, 61. pp. 160-174. ISSN 0379-7112

Harish, R and Venkatasubbaiah, K (2013) Numerical Simulation of fire spread in elevator shaft connected to adjacent lobby in tall building. In: 13th International conference on Fire Science and Engineering, 24-26 June 2013, University of London, UK.

J

Jadon, V (2013) Numerical & Experimental Study of Sloshing of Liquid in a Rectangular Tank. Masters thesis, Indian Institute of Technology Hyderabad.

K

K, Patel Rakeshkumar (2013) Numerical Simulation of Orion CEV Re-Entry Vehicle. Masters thesis, Indian Institute of Technology Hyderabad.

K, Santhosh Kumar (2013) CFD Analysis of Fuel Spray Characteristics Inside a GDI Engine. Masters thesis, Indian Institute of Technology Hyderabad.

K, Venkatasubbaiah and Abhishek, Anand (2013) Numerical Simulation of Mixed Convection Flow Over Heat Source Modules Mounted On A Horizontal Plate. Computational Thermal Sciences, 5 (1). pp. 27-41. ISSN 1940-2503

Kashfuddoja, M and M, Ramji (2013) Whole-field strain analysis and damage assessment of adhesively bonded patch repair of CFRP laminates using 3D-DIC and FEA. Composites Part B: Engineering, 53. pp. 46-61. ISSN 1359-8368

Kumar, P and Eswaran, Vinayak (2013) The effect of radiation on natural convection in slanted cavities of angle γ = 45° and 60°. International Journal of Thermal Sciences, 67. pp. 96-106. ISSN 1290-0729

Kumar, Pankaj and Eswaran, Vinayak (2013) Parametric Study of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation. Masters thesis, Indian Institute of Technology Hyderabad.

M

M, Ramji and R, Srilakshmi and M, Bhanu Prakash (2013) Towards optimization of patch shape on the performance of bonded composite repair using FEM. Composites Part B: Engineering, 45 (1). pp. 710-720. ISSN 1359-8368

Motali, B K and Sharma, Abhay (2013) Rotating Tool Cold Expansion. Masters thesis, Indian Institute of Technology Hyderabad.

O

O, Abdullah and S, Eren Semercigil and R, Prasanth Kumar and Y, Pulas (2013) Delaying tool chatter in turning with a two-link robotic arm. Journal of Sound and Vibration, 332 (6). pp. 1405-1417. ISSN 0022-460X

P

P, Jabir Ubaid (2013) Damage Prediction in Fiber Reinforced Composites. Masters thesis, Indian Institute of Technology Hyderabad.

P, Nithish Reddy (2013) Numerical Investigations on Development of Scramjet Propulsion System. Masters thesis, Indian Institute of Technology Hyderabad.

P, Murali Krishna and R, Prasanth Kumar and S, Srivastava (2013) Dynamic Gaits and Control in Flexible Body Quadruped Robot. In: 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), 18-20 December, 2013, IIT Roorkee, India.

P, Murali Krishna and R, Prasanth Kumar and S, Srivastava (2013) Level Trot Gait in Quadruped Robots. In: International Conference on Advances in Robotics, 04-06 July, 2013, Pune.

Panaskar, N J (2013) A Noval Concept of Combined Cold Expansion and Surface Processing of Fastener Holes Using Rotating Tool. Masters thesis, Indian Institute of Technology Hyderabad.

Panaskar, N J and Sharma, Abhay (2013) On feasibility of friction stir processing of cylindrical hole. In: 1st International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

Pandey, A K (2013) Effect of coupled modes on pull-in voltage and frequency tuning of a NEMS device. Journal of Micromechanics and Microengineering, 23 (8). ISSN 0960-1317

R

R, Harish and K, Venkatasubbaiah (2013) Numerical simulation of turbulent plume spread in ceiling vented enclosure. European Journal of Mechanics, B/Fluids, 42. pp. 142-158. ISSN 0997-7546

Rajan, H and Venkatasubbaiah, K (2013) Entrainment effects through horizontal and vertical vents on turbulent natural convection flows. In: 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, 28-31 december 2013, IIt Kharagpur, India.

Rangarajan, A M and Banerjee, Raja (2013) Numerical Investigation of In-Cylinder Fuel Atomization and Mixing For a GDI Engine. In: Proceeding of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December, 2013, IIT, Kharagpur.

Raviprolu, P (2013) Sound Radiation Characteristics of Rectangular Duct. Masters thesis, Indian Institute of Technology Hyderabad.

Reddy, S R and Sebastian, J and Miyyadad, S M and Banerjee, Raja and Sivadasan, N (2013) Single and Two Phase Flow CFD Solvers Using GPU. In: National Conference on Parallel Computing Technologies, 21-23, February 2013, Bangalore; India.

Robi, Mathews (2013) Effect of Area-Filling Path on the Residual Stresses Developed During Weld-Deposition Based Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

S

S, Suryakumar and Somashekara, M A (2013) Manufacturing of functionally gradient materials by using weld-deposition. In: International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

Shaikh, M (2013) Large Eddy Simulation of Turbulent Incompressible Flow Using GPU with Multigrid Algorithm. Masters thesis, Indian Institute of Technology Hyderabad.

Simhambhatla, S and Karunakaran, K P and Chandrasekhar, U and Somashekara, M A (2013) A Study of the Mechanical Properties of Objects Built through Weld-Deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-10. ISSN 0954-4054

Suryakumar, S and M A, Somashekara (2013) Preliminary study of process parameters for weld-deposition using twin wire system. In: 3rd International Conference & Exhibition on Additive Manufacturing Technologies AMSI, 7-8 October 2013, Bangalore, India.

Suryakumar, S and Somashekara, M A (2013) Manufacture of Functionally Gradient Materials Using Weld-Deposition. In: 24th International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2013, 12-13, August 2013, Austin, TX; United States.

T

T, Praveen and Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2013) On the elctromagnetic control of convection in low Prandtl number fluids. In: ISHMT-ASME Heat and Mass Transfer Conference, 28-31 december, IIT Kharagpur, India.

V

V, Janardhan and R, Prasanth Kumar (2013) Kinematic analysis of biped robot forward jump for safe locomotion. In: 16th National Conference on Machines and Mechanisms, 18-20 December 2013, Roorkee, India.

Vishwakarma, S D and Pratap, R and Pandey, A K and Parpia, J M and Southworth, D R and Barton, R A and Craighead, H G (2013) Estimation of Acoustic Losses in the Quality Factor of a Micromechanical 2D Resonator. In: 20th International Congress on Sound and Vibration 2013, ICSV 2013, 7-11 July 2013, Bangkok; Thailand.

Vyasarayani, C P and Gupta, A and McPhee, J (2013) Galerkin approximations for retarded delay differential equations with state-dependent delays. Journal of Dynamic Systems, Measurement, and Control, 135 (6). pp. 1-6. ISSN 0022-0434

Y

Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K (2013) A numerical investigation of the Eulerian PDF transport approach for modeling of turbulent non-premixed pilot stabilized flames. Combustion and Flame, 160 (3). pp. 618-634. ISSN 0010-2180

Yadav, R and Kushari, A and Verma, A K and Eswaran, Vinayak (2013) Weighted sum of gray gas modeling for nongray radiation in combusting environment using the hybrid solution methodology. Numerical Heat Transfer, Part B Fundamentals, 64 (2). pp. 174-197. ISSN 1040-7790

Ö

Özer, Abdullah and Eren Semercigil, S. and R, Prasanth Kumar and et al, . (2013) Delaying tool chatter in turning with a two-link robotic arm. Journal of Sound and Vibration, 332 (6). pp. 1405-1417. ISSN 0022460X