Items where Division is "Department of Material Science Engineering" and Year is 2022

A

Aamani, S. and Das, C. R. and Martha, Surendra Kumar and Albert, S. K. and Panigrahi, Bharat Bhooshan (2022) Influence of Nitrogen on Grain Size-Dependent Sensitisation and Corrosion Resistance of 316L (N) Austenitic Stainless Steels. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Athira, K. S. and Pandey, P. and Chatterjee, Subhradeep and et al, . (2022) Laser welding of a W-free precipitation strengthened Co-base superalloy. Journal of Materials Science, 57 (13). pp. 7085-7100. ISSN 0022-2461

B

B., Pravallika and Bhattacharya, Saswata and Dutta-Gupta, S (2022) Numerical study of propagating surface plasmons in complex alloy thin films. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

B., Pravallika and Dutta-Gupta, S. (2022) Effect of phase separation on the behavior of surface plasmons in Ag-Cu alloy thin films. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Bakshi, Payal and Pappu, Asokan and Kumar Bharti, Dhiraj (2022) Transformation of flue gas desulfurization (FGD) gypsum to β-CaSO4·0.5H2O whiskers using facile water treatment. Materials Letters, 308. pp. 1-5. ISSN 0167-577X

Bandaru, Pravallika and Ummethala, Govind and Malladi, Sai Rama Krishna and Dutta-Gupta, Shourya (2022) Microstructure Dictates the Behavior of Plasmons in Nanostructured Ag-Cu Alloy Films. The Journal of Physical Chemistry C, 126 (37). pp. 15915-15923. ISSN 1932-7447

Belkacemi, L.T. and Vaidya, M. and Sevlikar, S. and et al, . (2022) Intrinsic heterogeneity of grain boundary states in ultrafine-grained Ni: A cross-scale study by SIMS and radiotracer analyses. Materialia, 22. pp. 1-12. ISSN 2589-1529

Bharti, V.K. and Sharma, Chandra Shekhar and Khandelwal, Mudrika (2022) Ultra-high-rate lithium-sulfur batteries with high sulfur loading enabled by Mn2O3-carbonized bacterial cellulose composite as a cathode host. Electrochimica Acta, 422. pp. 1-15. ISSN 0013-4686

Bharti, Vikram Kishore and Pathak, Anil D. and Anjan, Apurva and Sharma, Chandra Shekhar and Khandelwal, Mudrika (2022) Covalently Confined Sulfur Composite with Carbonized Bacterial Cellulose as an Efficient Cathode Matrix for High-Performance Potassium–Sulfur Batteries. ACS Sustainable Chemistry & Engineering. pp. 1-13. ISSN 2168-0485

Bharti, Vikram Kishore and Sharma, Chandra Shekhar and Khandelwal, Mudrika and et al, . (2022) Flexible and free-standing bacterial cellulose derived cathode host and separator for lithium-sulfur batteries. Carbohydrate Polymers, 293. pp. 1-16. ISSN 0144-8617

Bhat, Anantha P. and Joshi, Manish Chandra and Malladi, Sairam K and et al, . (2022) Ba0.85Ca0.15Zr0.1Ti0.90O3/CoFe2O4/Ba0.85Ca0.15Zr0.1Ti0.90O3Nanoscale Composite Films with 2-2 Connectivity for Magnetoelectric Actuation. ACS Applied Nano Materials. pp. 1-12. ISSN 2574-0970

Bhat, Anantha P. and Ramadurai, Ranjith (2022) Estimation of gradient size of interfacial strain and its optimization for effective magnetoelectric coupling in (CoFe2O4) – (0.93Na0.5Bi0.5TiO3 – 0.07BaTiO3), 2-2 nano-composites. Ceramics International, 48 (6). pp. 7622-7628. ISSN 0272-8842

Bhattacharya, Rahul and Annasamy, Murugesan and Murty, B S and et al, . (2022) Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline AlxCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys. Journal of Materials Research, 37 (4). pp. 959-975. ISSN 0884-2914

Burla, Aditya and Khandelwal, Mudrika and Vaidya, M. (2022) Antibacterial properties of Cu containing complex concentrated alloys. Materials Today Communications, 33 (104915). pp. 1-8. ISSN 2352-4928

C

Chaudhary, Vijay and Pratim Das, Partha and Sahu, Rohit and Dey Sadhu, Susmita and Gupta, Pallav and Gupta, Sumit (2022) Engineered nanomaterials for environmental Sustainability: A Lab-to-Market perspective. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853

Chilla, Venkat and Mondal, D.P. and Janaki Ram, G.D. and et al, . (2022) Processing of in-situ aluminium foam-filled stainless steel tube with foam-tube bonding for enhanced crashworthiness. Journal of Manufacturing Processes, 82. pp. 488-500. ISSN 1526-6125

D

Das, Partha Pratim and Chaudhary, Vijay and Ahmad, Furkan and et al, . (2022) Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications. Polymer Composites, 43 (3). pp. 1221-1237. ISSN 0272-8397

Dhanabal, Rengasamy and Dey, Suhash Ranjan (2022) Perovskite solar cells: recent progress and strategies developed for minimizing interfacial recombination. Higher Education Press Limited Company.

E

Eichhorn, S. J. and Etale, A. and Khandelwal, Mudrika and et al, . (2022) Current international research into cellulose as a functional nanomaterial for advanced applications. Springer.

G

Gulivindala, G. and Ramadurai, Ranjit and Chinthapenta, Viswanath (2022) Indentation based fracture toughness estimation of barium titanate thin film using experiments and simulations. Thin Solid Films, 755. pp. 1-12. ISSN 0040-6090

H

Hariharan, V.S. and Pramod, S. and Murty, B S (2022) ICME framework to simulate microstructure evolution during laser powder bed fusion of Haynes 282 nickel-based superalloy. Journal of Materials Science, 57 (21). pp. 9693-9713. ISSN 0022-2461

I

Illa, Mani Pujitha and Adepu, Shivakalyani and Khandelwal, Mudrika (2022) Industrial-scale fabrication and functionalization of nanocellulose. In: Nanocellulose Materials. Elsevier, pp. 21-42. ISBN 9780128239636, 978-012824169-1

J

Jadhav, Mahesh and Singh, Sheela and Panigrahi, Bharat Bhooshan and et al, . (2022) Effect of minute element addition on the oxidation resistance of FeCoCrNiAl and FeCoCrNi2Al high entropy alloy. Advanced Powder Technology, 33 (2). pp. 1-13. ISSN 0921-8831

Jana, A.K. and Ghosal, P and Jammalamadaka, S Narayana and et al, . (2022) Ferromagnetic Thickness Variation Exchange Bias in IrMn (111)/Fe2CoSi Hybrid Structure. Journal of Superconductivity and Novel Magnetism, 35 (5). pp. 1313-1319. ISSN 1557-1939

Jana, Subhendu and Panigrahi, Gopabandhu and Ishtiyak, Mohd and Narayanswamy, Sake and Bhattacharjee, Pinaki Prasad and Niranjan, Manish K. and Prakash, J. (2022) Germanium Antimony Bonding in Ba4Ge2Sb2Te10 with Low Thermal Conductivity. Inorganic Chemistry, 61 (2). pp. 968-981. ISSN 0020-1669

Jana, Subhendu and Panigrahi, Gopabandhu and Ummethala, Govind and Ghosh, Arghya and Malladi, Sairam K. and Niranjan, Manish K. and Jai, Prakash (2022) Extremely low thermal conductivity in BaSb2Se4: Synthesis, characterization, and DFT studies. Journal of Solid State Chemistry, 315. pp. 1-11. ISSN 0022-4596

Janakiram, S. and Phani, P. Sudharshan and Ummethala, Govind and Jagdeesh, Hima Viswa and Malladi, Sai Rama Krishna and et al, . (2022) Insights on early recovery kinetics in ferrite - pearlite cold rolled high strength sheet steels. Materials Characterization, 193. pp. 1-14. ISSN 1044-5803

Jha, M.K. and Das, P.P. and Pandey, V. and Gupta, P. and Chaudhary, V and Gupta, S (2022) Water immersion aging of polymer composites: architectural change of reinforcement, mechanical, and morphological analysis. Biomass Conversion and Biorefinery. ISSN 2190-6815

John, Rahul and Dash, Manmath Kumar and Murty, B S and et al, . (2022) Effect of temperature and strain rate on the deformation behaviour and microstructure of Al0.7CoCrFeNi high entropy alloy. Materials Science and Engineering: A, 856. pp. 1-9. ISSN 0921-5093

John, Rahul and Malladi, Sairam K and Murty, B S and et al, . (2022) Microstructural evolution and effect of heat treatment on the precipitation and mechanical behavior of Al0.7CoCrFeNi alloy. Journal of Alloys and Compounds, 904. pp. 1-12. ISSN 0925-8388

Joseph, Anju and Billakanti, Srinivas and Pandit, Manzoor Ahmad and Khatun, Sajmina and Rengan, Aravind Kumar and et al, . (2022) Impact of bandgap tuning on ZnS for degradation of environmental pollutants and disinfection. Environmental Science and Pollution Research. ISSN 0944-1344

K

Kali, Naresh and Korla, Rajesh and Korla, Srikanth (2022) Impact Behaviour of Nano-Hybrid (Carbon/Glass) Fibre Metal Laminates: An Experimental Study. Arabian Journal for Science and Engineering. ISSN 2193-567X

Kali, Naresh and Korla, Rajesh and Korla, Srikanth (2022) Influence of Nanoparticles on Mechanical Properties of Hybrid Polymer-Layered Fibre Metal Laminates (FMLs). Transactions of the Indian Institute of Metals. ISSN 0972-2815

Kamaraj, Ashok and Mandal, Gopi K. and Shanmugam, Sethu P. and et al, . (2022) Quantification and analysis of slag carryover during liquid steel tapping from BOF vessel. Canadian Metallurgical Quarterly, 61 (2). pp. 202-215. ISSN 0008-4433

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G. K. and Roy, G. G. (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B, 53 (4). pp. 1989-2003. ISSN 1073-5615

Kannan, P.K. and Chaudhari, Sushmita and Dey, Suhash Ranjan and et al, . (2022) Progress in Development of CZTS for Solar Photovoltaics Applications. In: Encyclopedia of Smart Materials. Elsevier, pp. 681-698. ISBN 978-012815733-6, 978-012815732-9

Karati, Anirudha and Ghosh, Sanyukta and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. Journal of Materials Engineering and Performance, 31 (1). pp. 305-317. ISSN 1059-9495

Karati, Anirudha and Ghosh, Sanyukta and Nagini, M. and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18. Journal of Alloys and Compounds, 927. pp. 1-9. ISSN 0925-8388

Karati, Anirudha and Mishra, Soumya Ranjan and Ghosh, Sanyukta and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Ramanujan, R.V. and Yadav, Satyesh Kumar and Murty, B S and et al, . (2022) Thermoelectric properties of a high entropy half-Heusler alloy processed by a fast powder metallurgy route. Journal of Alloys and Compounds, 924. pp. 1-12. ISSN 0925-8388

Kaushik, G. Nischay and Nagini, M. and Reddy, M. Surya Prakash and Hebalkar, Neha Y. and Vijay, R. and Murty, B S (2022) Effect of Zr and ZrO2 on aqueous corrosion behaviour of oxide dispersion strengthened 9Cr ferritic-martensitic steels. Materials Letters, 324. pp. 1-4. ISSN 0167-577X

Krishna, S. Chenna and Muneshwar, Pravin and Pant, Bhanu and Korla, Rajesh (2022) Hot Deformation Behavior and Processing Map of Cu-Cr-Nb-Zr Alloy. Journal of Materials Engineering and Performance, 31 (2). pp. 1325-1337. ISSN 1059-9495

Kumaar Swamy Reddy, B. and Veeralingam, Sushmitha and Badhulika, Sushmee and et al, . (2022) A flexible, rapid response, hybrid inorganic–organic SnSe2–PEDOT:PSS bulk heterojunction based high-performance broadband photodetector. Materials Chemistry Frontiers, 6 (3). pp. 341-351. ISSN 2052-1537

Kumar, H. and Dash, A. and Bhattacharya, Saswata and et al, . (2022) A physics-informed neural network-based numerical inverse method for optimization of diffusion coefficients in NiCoFeCr multi principal element alloy. Scripta Materialia, 214. pp. 1-5. ISSN 1359-6462

Kumar, V. Kiran and Ghosh, Sourav and Naresh, Vangapally and Ummethala, Govind and Malladi, Sairam K and Martha, Surendra Kumar (2022) Binder and conductive diluents free NaVPO4F based free-standing positive electrodes for sodium-ion batteries. Journal of The Electrochemical Society, 169 (1). ISSN 0013-4651

Kumar T., Sudeep and Sourav, Ayush and Murty, B.S. and et al, . (2022) Role of Al and Cr on cyclic oxidation behavior of AlCoCrFeNi2 high entropy alloy. Journal of Alloys and Compounds, 919. pp. 1-10. ISSN 0925-8388

Kumbhani, Smit and Dharaiya, Vishesh (2022) A Custom Stacking-Based Ensemble Learning Approach to Predict Failure of Stripper Well. In: 2nd International Conference on Communication and Artificial Intelligence, ICCAI 2021, 19 November 2021 through 21 November 2021, Virtual, Online.

Kwak, Min Sub and Peddigari, Mahesh and Min, Yuho and et al, . (2022) Boosting the lifespan of magneto-mechano-electric generator via vertical installation for sustainable powering of Internet of Things sensor. Nano Energy, 101. pp. 1-12. ISSN 2211-2855

L

Lava Kumar, P. and Lombardi, A. and Murty, B S and et al, . (2022) Recent advances in aluminium matrix composites reinforced with graphene-based nanomaterial: A critical review. Progress in Materials Science, 128 (100948). pp. 1-95. ISSN 0079-6425

M

M., Jagathpriya L. and Dutta-Gupta, S. (2022) Simulation and fabrication of multi-layer plasmonic substrates for potential SERS application. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Mahanta, Urbashi and Khandelwal, Mudrika and Deshpande, Atul Suresh (2022) TiO2@SiO2 nanoparticles for methylene blue removal and photocatalytic degradation under natural sunlight and low-power UV light. Applied Surface Science, 576. pp. 1-11. ISSN 0169-4332

Mahesh, M. L. V. and Pal, Prem and Prasad, V. V. Bhanu and et al, . (2022) Improved Tunability and Energy Storage Density Properties of Low-Loss, Lead-Free (Ba0.50Sr0.50)TiO3 and Ba(Zr0.15Ti0.85)O3 Bilayer Thin Film Stacks. Journal of Electronic Materials, 51 (2). pp. 727-735. ISSN 0361-5235

Malladi, Sairam K and Niranjan, Manish K and Jai, Prakash and et al, . (2022) Metal to insulator transition in Ba2Ge2Te5: Synthesis, crystal structure, resistivity, thermal conductivity, and electronic structure. Materials Research Bulletin, 147. pp. 1-10. ISSN 0025-5408

Malladi, Sairam K and Niranjan, Manish K and Prakash, J. and et al, . (2022) Chalcogen dependent metal vacancies and disorder in Ba2Ln1−Mn2−S5 and Ba2−Ln1−Mn2−Se5 (Ln = Pr, Nd, and Gd) structures. Journal of Alloys and Compounds, 901. pp. 1-12. ISSN 0925-8388

Malladi, Sairam K and Niranjan, Manish K and Prakash, J. and et al, . (2022) Synthesis, characterization, and electronic structure of SrBi2S4. Journal of Solid State Chemistry, 312. pp. 1-11. ISSN 0022-4596

Malladi, Sairam K and Niranjan, Manish K and Prakash, J. and et al, . (2022) A new non-stoichiometric quaternary sulfide Ba3.14(4)Sn0.61(1)Bi2.39(1)S8: Synthesis, crystal structure, physical properties, and electronic structure. Journal of Solid State Chemistry, 308. pp. 1-10. ISSN 0022-4596

Malladi, Sairam K and Shashidhar, Thatikonda and Subrahmanyam, Challapalli and et al, . (2022) Oxidation of Toluene by Ozone over Surface-Modified γ-Al2O3: Effect of Ag Addition. Catalysts, 12 (4). pp. 1-12. ISSN 2073-4344

Mastanaiah, P. and Reddy, G. Madhusudan and Bhattacharya, Anirban and et al, . (2022) Unveiling Liquation and Segregation Induced Failure Mechanism in Thick Dissimilar Aluminum Alloy Electron-Beam Welds. Metals, 12 (3). pp. 1-17. ISSN 2075-4701

Meghwal, Ashok and Anupam, Ameey and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2022) Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating. Wear, 506-50. pp. 1-15. ISSN 0043-1648

Mehta, Jimmy and Das, Partha Pratim and Mehta, Sahil and et al, . (2022) Effect of nanofillers and nanotoxicity on the performance of composites: Influencing factors, future scope, challenges and applications. John Wiley and Sons Inc.

Mohanty, Uttam Kumar and Sharma, Abhay and Abe, Yohei and et al, . (2022) Parametric study on AC square waveform welding. Materials Today: Proceedings, 56. pp. 2980-2987. ISSN 2214-7853

Mukherjee, Eshita and Pillanagrovi, Jayakumar and Bhatnagar, Dhruv and Dutta-Gupta, S. (2022) Real time monitoring of assembly of plasmonic nanoparticles on polyelectrolyte coated surfaces. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

N

Naganaboina, Venkata Ramesh and Bonam, Satish and Anandkumar, Mariappan and Deshpande, Atul Suresh and Singh, Shiv Govind (2022) Humidity-Independent Methane Gas Detection in Gd0.2La0.2Ce0.2Hf0.2Zr0.2O2-based Sensor Using Polynomial Regression Analysis. IEEE Electron Device Letters. pp. 1-4. ISSN 0741-3106

Naganaboina, Venkata Ramesh and Deshpande, Atul Suresh and Singh, Shiv Govind and et al, . (2022) Single-Phase High-Entropy Oxide Nanoparticles for Wide Dynamic Range Detection of CO2. ACS Applied Nano Materials, 5 (3). pp. 4524-4536. ISSN 2574-0970

Naganaboina, Venkata Ramesh and Deshpande, Atul Suresh and Singh, Shiv Govind and et al, . (2022) Single-phase high-entropy oxide-based chemiresistor: Toward selective and sensitive detection of methane gas for real-time applications. Sensors and Actuators, B: Chemical, 357. pp. 1-10. ISSN 0925-4005

Najathulla, Bhagavathi Chalil and Deshpande, Atul Suresh and Khandelwal, Mudrika (2022) PEDOT:PSS/Bacterial Cellulose-based soft actuator under triangle and square wave: Deflection, response and fidelity. Synthetic Metals, 286. pp. 1-7. ISSN 0379-6779

Najathulla, Bhagavathi Chalil and Deshpande, Atul Suresh and Khandelwal, Mudrika (2022) Smartphone camera-based micron-scale displacement measurement: development and application in soft actuators. Instrumentation Science & Technology. pp. 1-10. ISSN 1073-9149

Nandeshwar, Ruchira and Illa, Mani Pujitha and Khandelwal, Mudrika and et al, . (2022) Enzymatic degradation of bacterial cellulose derived carbon nanofibers (BC-CNF) by myeloperoxidase (MPO): Performance evaluation for biosensing. Biosensors and Bioelectronics: X, 12. pp. 1-10. ISSN 2590-1370

Naveena, D. and Dhanabal, R. and Chandra Bose, A. (2022) Investigating the effect of La doped CuO thin film as absorber material for solar cell application. Optical Materials, 127. pp. 1-9. ISSN 0925-3467

Nowduru, R. and Bodapati, B.R. and Malladi, Sairam K (2022) Carbon soot nanoparticles derived from wasted rubber: An additive in lubricating oil for efficient friction and wear reduction. Diamond and Related Materials, 126. pp. 1-10. ISSN 0925-9635

P

Paikaray, B. and Haldar, Arabinda and Murapaka, Chandrasekhar and et al, . (2022) Large Spin Pumping and Inverse Spin Hall Effect in Ta/Py Bilayer Structures. Physica Status Solidi (a), 219 (11). ISSN 1862-6300

Paikaray, Bibekananda and Kuchibhotla, Mahathi and Haldar, Arabinda and Murapaka, Chandrasekhar (2022) Reconfigurable Logic Operations via Gate Controlled Skyrmion Motion in a Nanomagnetic Device. ACS Applied Electronic Materials, 4 (5). pp. 2290-2297. ISSN 2637-6113

Paikaray, Bibekananda and Kuchibhotla, Mahathi and Murapaka, Chandrasekhar and Haldar, Arabinda (2022) Skyrmion Dynamics in Concentric and Eccentric Nano-Ring Structures. IEEE Transactions on Magnetics, 58 (2). pp. 1-6. ISSN 0018-9464

Palguna, Y. and Rajesh Kannan, A. and Korla, Rajesh (2022) Microstructure and mechanical properties of wrought Al0.2CoCrFeNiMo0.5 high entropy alloy using gas tungsten arc welding process. Materials Letters, 317 (132109). pp. 1-4. ISSN 0167-577X

Pankaj, P and Bhattacharyya, S and Chatterjee, Subhradeep (2022) Surface-directed and bulk spinodal decomposition compete to decide the morphology of bimetallic nanoparticles. Modelling and Simulation in Materials Science and Engineering, 31 (015003). pp. 1-10. ISSN 0965-0393

Pankaj, P. and Bhattacharya, Saswata and Chatterjee, Subhradeep (2022) Competition of core-shell and Janus morphology in bimetallic nanoparticles: Insights from a phase-field model. Acta Materialia, 233. pp. 1-19. ISSN 1359-6454

Paremmal, P. and Karati, A. and Murty, B S and et al, . (2022) Effect of RF sputtering parameters on the nanoscratch properties of quinary Ti-Zr-Cu-Ni-Al thin film metallic glass. Journal of Alloys and Compounds, 908. pp. 1-12. ISSN 0925-8388

Parida, Tripta and Karati, Anirudha and Murty, B S and et al, . (2022) Low temperature synthesis of multicomponent perovskite by mechanochemical route. Ceramics International, 48 (5). pp. 6385-6392. ISSN 0272-8842

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Klement, Uta and Dey, Suhash Ranjan (2022) Graphene Oxide Reinforced Magnetic FeCoNiCuZn High Entropy Alloy through Electrodeposition. Journal of The Electrochemical Society, 169 (2). 022501. ISSN 0013-4651

Pavithra, Chokkakula L.P. and Rengan, Aravind Kumar and Dey, Suhash Ranjan and et al, . (2022) Primary attempt towards bioapplicability of one-dimensional high entropy alloys. Materials Letters, 312. pp. 1-4. ISSN 0167-577X

Peela, Bharadwaj and Bandaru, Pravallika and Dutta-Gupta, S. (2022) Janus Nanoparticles for Dual Wavelength Surface Enhanced Raman Scattering Applications. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Pillanagrovi, Jayakumar and Dutta-Gupta, S. (2022) Facile fabrication of nanoapertures with tunable plasmonic resonances. In: 2022 Workshop on Recent Advances in Photonics, WRAP 2022, 4 March 2022 through 6 March 2022, Mumbai.

Pillanagrovi, Jayakumar and Gupta, Shourya Dutta (2022) Controlled assembly of gold nanoparticles in resonant gold nanoapertures for SERS applications. Nanotechnology, 33 (48). ISSN 0957-4484

R

Radhakrishnan, Sidharth and Das, Partha Pratim and Chaudhary, Vijay (2022) Deciphering the pathways for evaluation of nanofillers for polymer composites: biodegradability, sustainability, and emerging applications. Biomass Conversion and Biorefinery. ISSN 2190-6815

Rajakumara, Eerappa and Abhishek, Suman and Nitin, Kulhar and et al, . (2022) Structure and Cooperativity in Substrate–Enzyme Interactions: Perspectives on Enzyme Engineering and Inhibitor Design. ACS Chemical Biology, 17 (2). pp. 266-280. ISSN 1554-8929

Reddy B, Kumaar Swamy and Veeralingam, Sushmitha and Badhulika, Sushmee and et al, . (2022) High responsivity self-powered flexible broadband photodetector based on hybrid Selenium-PEDOT:PSS junction. Organic Electronics, 108. pp. 1-9. ISSN 1566-1199

S

Sabban, Rushikesh and Dash, K. and Suwas, S. and Murty, B S (2022) Strength–Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. Springer.

Saha, J. and Saha, R. and Bhattacharjee, Pinaki Prasad (2022) Microstructure and texture development in CoCrNi medium entropy alloy processed by severe warm cross-rolling and annealing. Intermetallics, 143. pp. 1-12. ISSN 0966-9795

Saha, J. and Saha, R. and Bhattacharjee, Pinaki Prasad (2022) Microstructure and texture of severely warm-rolled and annealed coarse-grained CoCrNi medium entropy alloy (MEA): A perspective on the initial grain size effect. Journal of Alloys and Compounds, 904. pp. 1-11. ISSN 0925-8388

Sahoo, Ajit Kumar and Talapatra, Abhishek and Mohanty, Jyoti Ranjan and et al, . (2022) Modification of magnetic properties in Tb–Fe/Gd–Fe/Tb–Fe trilayer using ion-beam irradiation. Applied Physics A, 128 (3). ISSN 0947-8396

Samanta, Sunrit and Pandey, Ashok Kumar (2022) Electromechanical Modelling of Ring Type of MEMS Gyroscopes. In: Virtual Seminar on Applied Mechanics, VSAM 2021, 28 May 2021 through 29 May 2021, Virtual, Online.

Sarila, Venu Kumar and Moinuddin, Syed Quadir and Cheepu, Muralimohan and Rajendran, Hamshini and et al, . (2022) Characterization of Microstructural Anisotropy in 17–4 PH Stainless Steel Fabricated by DMLS Additive Manufacturing and Laser Shot Peening. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Sasikumar, R. and Kannan, A. Rajesh and Kumar, S. Mohan and Pramod, R. and Kumar, N. Pravin and Shanmugam, N. Siva and Palguna, Yasam and et al, . (2022) Wire arc additive manufacturing of functionally graded material with SS 316L and IN625: Microstructural and mechanical perspectives. CIRP Journal of Manufacturing Science and Technology, 38. pp. 230-242. ISSN 1755-5817

Sasikumar, Shyama and Boden, Andrew and Pati, Falguni and et al, . (2022) Galactose Tethered Decellularized Liver Matrix: Toward a Biomimetic and Biofunctional Matrix for Liver Tissue Engineering. ACS Applied Bio Materials, 5 (6). pp. 3023-3037. ISSN 2576-6422

Sata, Amit and Dharaiya, Vishesh (2022) Geometry-Driven Criterion Function for Predicting Shrinkage Porosity in Stainless Steel Castings with T-Junction. Journal of Advanced Manufacturing Systems, 21 (03). ISSN 0219-6867

Sen, Sanket and Mandal, S. and Sen, Arnab and et al, . (2022) Fragmentation dynamics of doubly charged camphor molecule following C 1s Auger decay. Physical Chemistry Chemical Physics, 24 (5). pp. 2944-2957. ISSN 1463-9076

Shivaram, M. J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2022) Development and Characterization of Biomedical Porous Ti–20Nb–5Ag Alloy: Microstructure, Mechanical Properties, Surface Bioactivity and Cell Viability Studies. Metals and Materials International. ISSN 1598-9623

Sisodia, Rohit and Jerry, Kabir and Pratim Das, Partha and Gupta, Pallav and Gupta, Sumit and Chaudhary, Vijay (2022) Experimental study on mechanical behaviour of linen/epoxy and linen/hemp/epoxy hybrid polymer composite. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853

Srideep, Dasari and Sriram, Kasilingam and Kotha, Srinu and Babu, Deepu J. and Singh, Saurabh Kumar and Rao, K V (2022) Synthesis and Self‐assembly of Benzoperylene Benzimidazoles: Tunable Morphology with Aggregation‐Induced Enhanced Emission. Chemistry – An Asian Journal, 17 (8). ISSN 1861-4728

Sriram, K. and Pala, Jay and Haldar, Arabinda and Murapaka, Chandrasekhar and et al, . (2022) Effect of Annealing on Magnetization Reversal and Spin Dynamics in Co40Fe40B20 Thin Films. Journal of Superconductivity and Novel Magnetism. ISSN 1557-1939

Sriram, K. and Pala, Jay and Mondal, Rohiteswar and Paikaray, Bibekananda and Jain, Komal and Basheed, G. A. and Haldar, Arabinda and Murapaka, Chandrasekhar (2022) Effect of Annealing on Magnetization Reversal and Spin Dynamics in Co40Fe40B20 Thin Films. Journal of Superconductivity and Novel Magnetism. ISSN 1557-1939

Sushma, Mudigunda V. and Sabarigresan, M. and Jogdand, Anil Bankati and Yadav, Dokkari Nagalaxmi and Rengan, Aravind Kumar and Ramadurai, Ranjith (2022) Ferroelectric polarization of β-polyvinylidene fluoride as control and mitigator of infectious organisms. Materials Today Communications, 32. pp. 1-8. ISSN 2352-4928

T

Tamboli, Rameez R. and Dudala, Srinivas and Andersen, Dustin and Valle, Nathalie and Eswara, Santhana and Korla, Rajesh and Dey, Suhash Ranjan and et al, . (2022) Quantitative prediction of Al and learning grain boundary character in Al-rich interstitial free steel. Scripta Materialia, 219. pp. 1-5. ISSN 1359-6462

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Comprehensive Observations and Interpretations in Al-Rich Interstitial-Free High-Strength Steel via Process-Induced Structure Evolution. Journal of Materials Engineering and Performance. ISSN 1059-9495

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Fostering deep drawability through recrystallization texture strengthening in aluminum-rich interstitial free steel. Materials Characterization, 193. pp. 1-12. ISSN 1044-5803

Tan, Li Ling and Loganathan, Nitin and Agarwalla, Sushama and Yang, Chun and Yuan, Weiyong and Zeng, Jasmine and Wu, Ruige and Wang, Wei and Duraiswamy, Suhanya (2022) Current commercial dPCR platforms: technology and market review. Taylor and Francis Ltd..

Thakur, Deepa and Sato, Yukio and Sabarigresan, M. and Ramadurai, Ranjith and et al, . (2022) Enhanced optical emission at MoS2-WS2 heterostructure interface with n-N junction. Applied Surface Science, 606. pp. 1-9. ISSN 0169-4332

Tripathy, B. and Bhattacharjee, Pinaki Prasad (2022) Superior strength-ductility synergy of a cost-effective AlCrFe2Ni2 high entropy alloy with heterogeneous microstructure processed by moderate cryo-rolling and annealing. Materials Letters, 326. pp. 1-4. ISSN 0167-577X

Tripathy, B. and Malladi, Sairam K and Bhattacharjee, Pinaki Prasad (2022) Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing. Materials Science and Engineering: A, 831. pp. 1-12. ISSN 0921-5093

Tripathy, B. and Saha, R. and Bhattacharjee, Pinaki Prasad (2022) Microstructure and unusually strong recrystallization texture of the FCC phase of a cost-effective high-strength dual-phase AlCrFe2Ni2 high entropy alloy. Intermetallics, 145. pp. 1-12. ISSN 0966-9795

Trivedi, Vikrant and Battabyal, Manjusha and Murty, B.S. and Gopalan, Raghavan (2022) Interfacial thermoelectric and mechanical properties of indigenously prepared Ni–Cr–Cu/Co4Sb12 skutterudite thermoelectric joints. Ceramics International. pp. 1-8. ISSN 0272-8842

Trivedi, Vikrant and Tiadi, Minati and Murty, B S and et al, . (2022) Giant Thermoelectric Efficiency of Single-Filled Skutterudite Nanocomposites: Role of Interface Carrier Filtering. ACS Applied Materials & Interfaces, 14 (45). pp. 51084-51095. ISSN 1944-8244

V

Varghese, Johny and Rajulapati, Koteswararao V. and Bhanu Sankara Rao, K. and et al, . (2022) Ambient, elevated temperature tensile properties and origin of strengthening in friction stir welded 6 mm thick reduced activation ferritic-martensitic steel plates in as-welded and post-weld normalised conditions. Materials Science and Engineering: A, 857. pp. 1-15. ISSN 0921-5093

Veeman, Dhinakaran and Alruqi, Mansoor and Kumar Subramaniyan, Mohan and Shanmugam Nallathambhi, Siva and Agnelo Browne, Micheal and Kamaraj, Ashok (2022) Fabrication of functionally graded material via gas tungsten arc welding based wire feeding additive manufacturing: Mechanical and microstructural characterization. Materials Letters, 324. pp. 1-4. ISSN 0167-577X

Velpandian, M. and Ummethala, G. and Malladi, Sairam K and Meduri, Praveen (2022) Heterostructures of tin and tungsten selenides for robust overall water splitting. Journal of Colloid and Interface Science, 623. pp. 561-573. ISSN 0021-9797

Velpandian, Muthuraja and Ummethala, Govind and Malladi, Sai Rama Krishna and Meduri, Praveen (2022) Heterogeneous interface-induced electrocatalytic efficiency boosting of bimetallic Cu/Zn selenides for stable water oxidation and oxygen reduction reactions. Catalysis Science & Technology. pp. 1-13. ISSN 2044-4753

Velpandian, Muthuraja and Ummethala, Govind and Malladi, Sairam K and Meduri, Praveen (2022) Heterostructures of tin and tungsten selenides for robust overall water splitting. Journal of Colloid and Interface Science, 623. pp. 561-573. ISSN 0021-9797

Verma, M. and Sugathan, S. and Bhattacharya, Saswata and et al, . (2022) A computational analysis of universal behavior of thermal groove in a moving grain boundary. Scripta Materialia, 209. pp. 1-7. ISSN 1359-6462

Vikram, R. J. and Verma, S. K. and Dash, K. and Fabijanic, D. and Murty, B. S. and et al, . (2022) Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy. Metallurgical and Materials Transactions A. ISSN 1073-5623

Villalobos, Luis Francisco and Babu, Deepu J. and Hsu, Kuang-Jung and et al, . (2022) Gas Separation Membranes with Atom-Thick Nanopores: The Potential of Nanoporous Single-Layer Graphene. Accounts of Materials Research. pp. 1-15. ISSN 2643-6728

Y

Yadav, Sweta and Jana, Subhendu and Panigrahi, Gopabandhu and Malladi, Sairam K. and Niranjan, Manish K. and Prakash, Jai (2022) Five coordinated Mn in Ba4Mn2Si2Te9: synthesis, crystal structure, physical properties, and electronic structure. Dalton Transactions, 51 (24). pp. 9265-9277. ISSN 1477-9226

Yebaji, Sushil and Saurav, Ayush and Chauhan, Pranjal and Murty, B S and et al, . (2022) Phase Stability of AlCoTiZn High-Entropy Alloy Prepared by Mechanical Alloying. Journal of Materials Engineering and Performance. ISSN 1059-9495