Items where Division is "Department of Material Science Engineering" and Year is 2021

A

Aamani, S. and Das, C.R. and Martha, Surendra K. and Panigrahi, Bharat B. (2021) Effect of nitrogen on grain boundary character distribution in 316 stainless steel. Materials Letters, 288. p. 129387. ISSN 0167577X

Anandkumar, Mariappan and Lathe, Ajay and Palve, Anil M. and Deshpande, Atul Suresh (2021) Single-phase Gd0.2La0.2Ce0.2Hf0.2Zr0.2O2 and Gd0.2La0.2Y0.2Hf0.2Zr0.2O2 nanoparticles as efficient photocatalysts for the reduction of Cr(VI) and degradation of methylene blue dye. Journal of Alloys and Compounds, 850. p. 156716. ISSN 09258388

Arvindha Babu, D. and Majumdar, Bhaskar and Sarkar, R. and Murty, B S (2021) Phase Stability of Rapidly Solidified (Fe1−xNix)88Zr7B4Cu1 Ribbons. Metallurgical and Materials Transactions A, 52 (2). pp. 560-573. ISSN 1073-5623

C

Chandrakant, . and Reddy, N.S. and Panigrahi, Bharat B. (2021) Electro spark coating of AlCoCrFeNi high entropy alloy on AISI410 stainless steel. Materials Letters, 304 (130580). ISSN 0167577X

Chaudhari, Sushmita and Kannan, P.K. and Madhuri, K. and Rey, Suhash R. (2021) Formulation of selenium-rich Cu2ZnSn(SxSe1-x)4 film through non-vacuum dip coating technique. J Mater Sci: Mater Electron.

D

Damodar, Devarakonda and Mahanta, Urbashi and Deshpande, Atul Suresh (2021) N-doped MWCNTs from catalyst-free, direct pyrolysis of commercial glue. Materials Chemistry and Physics, 262. p. 124319. ISSN 0254-0584

Das, Partha Pratim and Chaudhary, Vijay (2021) Tribological properties of biofiber-based polymer composites. In: Advances in Bio-Based Fiber. Elsevier, pp. 193-211. ISBN 978-012824543-9, 978-012824544-6

Dhania, N.K. and Chauhan, V.K. and Abhilash, D. and Thakur, V. and Chaitanya, R.K. and Dutta-Gupta, S. and Dutta-Gupta, A. (2021) Gut-specific arylphorin mediates midgut regenerative response against Cry-induced damage in Achaea janata. Comparative Biochemistry and Physiology Part - B: Biochemistry and Molecular Biology, 255 (110600). ISSN 10964959

Dudala, Srinivas and Krishna S, Chenna and Korla, Rajesh (2021) Microstructural evolution and grain-growth kinetics of Al0.2CoCrFeNi high-entropy alloy. Philosophical Magazine Letters, 101 (11). pp. 444-454. ISSN 0950-0839

G

Ghosh, Sanyukta and Tippireddy, Sahil and Shankar, Gyan and Karati, Anirudha and Rogl, Gerda and Rogl, Peter and Bauer, Ernst and Malladi, Sai Rama Krishna and Murty, B S and et al, . (2021) InSb nanoparticles dispersion in Yb-filled Co4Sb12 improves the thermoelectric performance. Journal of Alloys and Compounds, 880. pp. 1-10. ISSN 0925-8388

H

Hasani, N. and Dharmendra, C. and Sanjari, M. and Fazeli, F. and Amirkhiz, B.S. and Pirgazi, H. and G.D, Janaki Ram and et al, . (2021) Laser powder bed fused Inconel 718 in stress-relieved and solution heat-treated conditions. Materials Characterization, 181. pp. 1-16. ISSN 1044-5803

Hassanpour, A. and Vaidya, M. and Divinski, S.V. and Wilde, G. (2021) Impact of cryogenic cycling on tracer diffusion in plastically deformed Pd40 Ni40 P20 bulk metallic glass. Acta Materialia, 209 (116785). pp. 1-10. ISSN 13596454

I

Illa, Mani Pujitha and Peddapapannagari, Kalyani and Raghavan, Siju Cherikkattil and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2021) In situ tunability of bacteria derived hierarchical nanocellulose: current status and opportunities. Springer Science and Business Media B.V.

Ishtiyak, Mohd and Bhattacharjee, P. P. and et al, . (2021) Syntheses, crystal structures, optical, and theoretical study of two ternary chalcogenides CsSc5Te8 and Cs0.6(1)Ti6Se8 with tunnel structures. Solid State Sciences, 114. p. 106577. ISSN 12932558

J

J, Saha and G, Ummethala and Malladi, S R K and Bhattacharjee, Pinaki Prasad (2021) Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling. Intermetallics (129). ISSN 0966-9795

Janakiram, S. and Phani, P. Sudharshan and Ummethala, Govind and Malladi, Sai Rama Krishna and et al, . (2021) New insights on recovery and early recrystallization of ferrite-pearlite banded cold rolled high strength steels by high speed nanoindentation mapping. Scripta Materialia, 194. pp. 1-5. ISSN 1359-6462

Jogi, Tushar and Bhattacharya, Saswata (2021) Interfacial dislocation network in precipitation strengthened alloys during creep: a discrete dislocation dynamics (DDD) study in three dimensions. Modelling and Simulation in Materials Science and Engineering, 29 (3). ISSN 0965-0393

K

Kalyani, Peddapapannagari and Khandelwal, Mudrika (2021) Modulation of morphology, water uptake/retention, and rheological properties by in-situ modification of bacterial cellulose with the addition of biopolymers. Cellulose, 28 (17). pp. 11025-11036. ISSN 0969-0239

Karati, A. et al. (2021) Effect of Processing Routes on the Microstructure and Thermoelectric Properties of Half-Heusler TiFe0.5Ni0.5Sb1−xSnx (x = 0, 0.05, 0.1, 0.2) Alloys. Journal of Materials Engineering and Performance, 31 (1). pp. 305-317. ISSN 10599495

Karre, Rajamallu and Dey, Suhash Ranjan (2021) Progress in Development of Beta Titanium Alloys for Biomedical Applications. In: Encyclopedia of Smart Materials. Elsevier, pp. 512-527.

Karthick, G. and Raman, Lavanya and Murty, B S (2021) Phase evolution and mechanical properties of novel nanocrystalline Y2(TiZrHfMoV)2O7 high entropy pyrochlore. Journal of Materials Science & Technology, 82. pp. 214-226. ISSN 1005-0302

Khandelwal, Mudrika and Sharma, Chandra Shekhar (2021) Nature Inspires: The Story of Lotus Leaf and Gecko’s Foot. Resonance, 26 (9). pp. 1279-1285. ISSN 0971-8044

Khond, Anuj and Adil, Shaik and Guruvidyathri, K. and Murty, B S and et al, . (2021) Kinetics and phase formation during crystallization of Hf64Cu18Ni18 amorphous alloy. Phase Transitions, 94 (2). pp. 110-121. ISSN 0141-1594

Kumar Behera, Aroop and Murapaka, Chandrasekhar and Mallick, Sougata and et al, . (2021) Skyrmion racetrack memory with an antidot. Journal of Physics D: Applied Physics, 54 (2). ISSN 0022-3727

L

L. P. Pavithra, Chokkakula and Siri Kiran Janardhana, Reddy Kunda and Madhav Reddy, Kolan and Murapaka, Chandrasekhar and Wang, Xiaodong and Dey, Suhash Ranjan (2021) One-dimensional Co–Cu–Fe–Ni–Zn high-entropy alloy nanostructures. Materials Research Letters, 9 (7). pp. 285-290. ISSN 2166-3831

Lee, Sedong and Narayana, P.L. and Seok, Bang Won and Panigrahi, B.B. and Lim, Su-Gun and Reddy, N.S. (2021) Corrigendum to “Quantitative estimation of corrosion rate in 3C steels under seawater environment” [J Mater Res Technol vol. 11 (March–April 2021) 681–686]. Journal of Materials Research and Technology, 12. p. 1844. ISSN 22387854

Lee, Sedong and Narayana, P.L. and Seok, Bang Won and Panigrahi, B.B. and Lim, Su-Gun and S. Reddy, N. (2021) Quantitative estimation of corrosion rate in 3C steels under seawater environment. Journal of Materials Research and Technology, 11. pp. 681-686. ISSN 22387854

M

Madhuri, K. and Kannan, P. K. and Yadav, Brijesh Singh and Chaudhari, Sushmita and Dhage, Sanjay R. and Dey, Suhash Ranjan (2021) Investigation on effects of precursor pre-heat treatments on CIGS formation using spin-coated CIG precursor. Journal of Materials Science: Materials in Electronics, 32 (2). pp. 1521-1527. ISSN 0957-4522

Mahanta, U. and Khandelwal, M. and Deshpande, A. (2021) Antimicrobial surfaces: a review of synthetic approaches, applicability and outlook. Journal of the Iranian Statistical Society, 56 (32). pp. 17915-17941. ISSN 00222461

Majhi, S. and Peddiraju, V.C. and Mishra, A. (2021) Effect of antimicrobial peptide (AMP)–tethered stainless steel surfaces on the bacterial membrane. Materials Today Chemistry, 21 (100541). ISSN 2468-5194

Majumdar, Anindita (2021) Introduction. Contending with the Hourglass: Time, Reproduction, and the Problematization of Ageing. Anthropology & Aging, 42 (1). pp. 1-9. ISSN 2374-2267

Mane, R.B. and Panigrahi, B.B. and et al, . (2021) Doping-induced coloration in titania. Journal of the American Ceramic Society, 104 (7). pp. 2932-2936. ISSN 00027820

Mane, Rahul B. and Sahoo, Ramkrishna and Reddy, Bapathi Kumaar Swamy and Ravula, Vijay and Panigrahi, Bharat B. and Borse, Pramod H. and Chakravarty, Dibyendu (2021) Doping‐induced coloration in titania. Journal of the American Ceramic Society, 104 (7). pp. 2932-2936. ISSN 0002-7820

Manoj, Talluri and Kotha, Srinu and Paikaray, Bibekananda and Srideep, Dasari and Haldar, Arabinda and Kotagiri, Venkata Rao and Murapaka, Chandrasekhar (2021) Giant spin pumping at the ferromagnet (permalloy) – organic semiconductor (perylene diimide) interface. RSC Advances, 11 (56). pp. 35567-35574. ISSN 2046-2069

Mantripragada, R. and Korla, R. and et al, . (2021) Effect of solutionizing temperature on the microstructural evolution during double aging of powder bed fusion-additive manufactured IN718 alloy. Materials Characterization, 172 (110868). ISSN 10445803

Meghwal, Ashok and Anupam, Ameey and Luzin, Vladimir and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2021) Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings. Journal of Alloys and Compounds, 854. pp. 1-20. ISSN 0925-8388

Murthy, S.S.N. and Patel, Manish and Reddy, T. Sreekantha and Prasad, V.V. Bhanu and Panigrahi, Bharat B. (2021) Processing and characterization of carbon fibres reinforced ZrB2 ultra high temperature ceramic matrix composite. Ceramics International. ISSN 02728842

N

Narayanswamy, S. and Saha, R. and Bhattacharjee, P.P. (2021) Cross-rolling mediated microstructure and texture evolution in severely cold-rolled and annealed ultrafine pearlite. Materials Characterization, 171 (110751). ISSN 10445803

Nasani, Narendar and Shakel, Zinaida and Loureiro, Francisco J.A. and Panigrahi, Bharat Bhooshan and Kale, Bharat B. and Fagg, Duncan P. (2021) Exploring the impact of sintering additives on the densification and conductivity of BaCe0.3Zr0.55Y0.15O3-δ electrolyte for protonic ceramic fuel cells. Journal of Alloys and Compounds, 862. p. 158640. ISSN 0925-8388

P

Paikaray, B. and Murapaka, C. and et al, . (2021) Tunable microwave properties of a skyrmion in an isolated nanodisk. Journal of Magnetism and Magnetic Materials, 529 (167900). ISSN 03048853 (Submitted)

Panda, J. P. and Arya, P. and Guruvidyathri, K. and Ravikirana, . and Murty, B S (2021) Studies on Kinetics of BCC to FCC Phase Transformation in AlCoCrFeNi Equiatomic High Entropy Alloy. Metallurgical and Materials Transactions A, 52 (5). pp. 1679-1688. ISSN 1073-5623

Pandey, Ullas and Rani, Malothu Usha and Deshpande, Atul Suresh and Singh, Shiv Govind and et al, . (2021) Sweetcorn husk derived porous carbon with inherent silica for ultrasensitive detection of ovarian cancer in blood plasma. Electrochimica Acta, 397. pp. 1-11. ISSN 0013-4686

Panigrahi, G. and Bhattacharjee, P. P. and Niranjan, M. K. and Prakash, J. and et al, . (2021) Ba2Ln1−xMn2Te5 (Ln = Pr, Gd, and Yb; x = Ln vacancy): syntheses, crystal structures, optical, resistivity, and electronic structure. Dalton Transactions, 50 (19). pp. 6688-6701. ISSN 1477-9226

Panigrahi, Gopabandhu and Jana, Subhendu and Narayanswamy, S. and Bhattacharjee, Pinaki Prasad and Niranjan, Manish K. and Jai, Prakash (2021) Reactive molten-flux assisted syntheses of single crystals of Cs19Ln19Mn10Te48 (Ln = Pr and Gd) crystallizing in a new structure type. CrystEngComm, 23 (47). pp. 8418-8429. ISSN 1466-8033

Parakh, A. and Murty, B S and et al, . (2021) Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy. Journal of Alloys and Compounds, 863 (15805). ISSN 0925-8388

Pavithra, Chokkakula L. P. and Janardhana, Reddy Kunda Siri Kiran and Reddy, Kolan Madhav and Murapaka, Chandrasekhar and Joardar, Joydip and Sarada, Bulusu V. and Tamboli, Rameez R. and Hu, Yixuan and Zhang, Yumeng and Wang, Xiaodong and Dey, Suhash Ranjan (2021) An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy alloy thin films. Scientific Reports, 11 (1). ISSN 2045-2322

Peddiraju, Vivek C. and Athira, K. S. and Simhambhatla, Suryakumar and Chatterjee, Subhradeep (2021) Enhancing Surface Hardness of Titanium Through Ni-Ti Intermetallic Microstructures Formed In Situ During Weld Deposition of Nickel. Metallurgical and Materials Transactions A, 52 (2). pp. 591-604. ISSN 1073-5623

Premasudha, Mookala and Bhumi Reddy, Srinivasulu Reddy and Lee, Yeon‐Ju and Panigrahi, Bharat B. and Cho, Kwon‐Koo and Nagireddy Gari, Subba Reddy (2021) Using artificial neural networks to model and interpret electrospun polysaccharide (Hylon VII starch) nanofiber diameter. Journal of Applied Polymer Science, 138 (11). p. 50014. ISSN 0021-8995

R

Raghavan, Siju Cherikkattil and PV, Anju and Khandelwal, Mudrika (2021) Hierarchical amphiphilic high‐efficiency oil–water separation membranes from fermentation derived cellulose and recycled polystyrene. Journal of Applied Polymer Science, 138 (13). p. 50123. ISSN 0021-8995

Raineesh, K. P. and Sairam, K. and Rajesh, K. and Prasad, K. Eswar (2021) Novel approach to characterize the deformation under Berkovich and spherical indentations: Study on magnesium single crystals. Physical Review Materials, 5 (8). ISSN 2475-9953

Rajesh Kannan, A. and Mohan Kumar, S. and Pramod, R. and Siva Shanmugam, N. and Palguna, Yasam and et al, . (2021) Microstructure and Mechanical Properties of Dissimilar Aluminum Alloys AA5052-H32 and AA2219-T31 Welded Using Cold Metal Transfer Process. Materials Performance and Characterization, 10 (1). ISSN 2379-1365

Raman, L. and Murty, B S and et al, . (2021) Strengthening mechanisms in CrMoNbTiW refractory high entropy alloy. Materials Science and Engineering: A, 819 (141503). ISSN 09215093

Rani, Malothu Usha and Naresh, Vangapally and Damodar, Devarakonda and Muduli, Sadananda and Martha, Surendra Kumar and Deshpande, Atul Suresh (2021) In-situ formation of mesoporous SnO2@C nanocomposite electrode for supercapacitors. Electrochimica Acta, 365. p. 137284. ISSN 00134686

Reddy, B.S. and In, Kim Hong and Panigrahi, Bharat B. and Paturi, Uma Maheswera Reddy and Cho, K.K. and Reddy, N.S. (2021) Modeling tensile strength and suture retention of polycaprolactone electrospun nanofibrous scaffolds by artificial neural networks. Materials Today Communications, 26. p. 102115. ISSN 23524928

Reddy, Seelam Rajasekhar and Sunkari, Upender and Bhattacharjee, Pinaki Prasad (2021) Recrystallization Behavior of High Entropy Alloys. In: Encyclopedia of Materials: Metals and Alloys. Elsevier, pp. 417-426.

S

Saha, J. and Bhattacharjee, Pinaki Prasad (2021) Influences of Thermomechanical Processing by Severe Cold and Warm Rolling on the Microstructure, Texture, and Mechanical Properties of an Equiatomic CoCrNi Medium-Entropy Alloy. Journal of Materials Engineering and Performance, 30 (12). pp. 8956-8971. ISSN 1059-9495

Saha, J. and Saha, R. and Malladi, Sai Rama Krishna and Bhattacharjee, Pinaki Prasad (2021) Microstructure and texture of CoCrNi medium entropy alloy (MEA) processed by severe cryo-rolling: A study vis-a-vis cold-rolling. Intermetallics, 138. pp. 1-10. ISSN 0966-9795

Sahane, Disna and Singh, Sheela and Jadhav, Mahesh and Panigrahi, Bharat B. (2021) Isothermal and non-isothermal sintering characteristics of mechanically alloyed nonequiatomic Fe2CoCrMnNi high-entropy alloy powder. Powder Metallurgy, 64 (1). pp. 64-74. ISSN 0032-5899

Shahedi Asl, M. and Janaki Ram, G.D. and et al, . (2021) Formation of Al–Al2O3 core–shell nanosphere chains during electron beam melting of γ-TiAl. Intermetallics, 136 (107261). ISSN 09669795

Sharma, Chandra S. and Khandelwal, Mudrika (2021) Polystyrene Recycling to Print Transfer. Resonance, 26 (9). pp. 1305-1310. ISSN 0971-8044

Shekhar, Shashank and Gautam, Sanjeev and Sharma, Bhasha and Sharma, Shreya and Das, Partha Pratim and Chaudhary, Vijay (2021) Deciphering the pathways for evaluation of nanotoxicity: Stumbling block in nanotechnology. Elsevier Ltd.

Shivaram, M. J. and Arya, Shashi Bhushan and Nayak, Jagannath and Panigrahi, Bharat B. (2021) Tribocorrosion Behaviour of Biomedical Porous Ti–20Nb–5Ag Alloy in Simulated Body Fluid. Journal of Bio- and Tribo-Corrosion, 7 (2). ISSN 2198-4220

Singh, Vajinder and Mondal, Chandan and Sarkar, Rajdeep and Bhattacharjee, Pinaki Prasad and Ghosal, P (2021) Effects of Cr alloying on the evolution of solidification microstructure and phase transformations of high-Nb containing γ-TiAl based alloys. Intermetallics, 131. p. 107117. ISSN 0966-9795

Singh, Vajinder and Mondal, Chandan and Sharma, Aditya R. and Kumar, Atul and Bhattacharjee, Pinaki Prasad and et al, . (2021) Hot Deformation Behavior of γ-TiAl-Based Ti–45Al–8Nb–6Cr–0.2B Alloy in the γ + β Phase Field. In: Applications of Microscopy in Materials and Life Sciences. Springer Nature, pp. 135-144.

Sriram, K. and Pala, Jay and Paikaray, Bibekananda and Haldar, Arabinda and Murapaka, Chandrasekhar (2021) Effect of seed layer thickness on the Ta crystalline phase and spin Hall angle. Nanoscale, 13 (47). pp. 19985-19992. ISSN 2040-3364

Sundaram, S. et al (2021) Development of shielded metal arc welding electrodes to achieve carbide-free bainitic weld microstructures. Welding in the World. ISSN 00432288

T

Thakur, Deepa and Kumar, Pawan and M, Sabarigresan and Ramadurai, Ranjith and et al, . (2021) Layer number dependent optical and electrical properties of CVD grown two-dimensional anisotropic WS2. Surfaces and Interfaces, 26. pp. 1-8. ISSN 2468-0230

Trivedi, V. and Murty, B S and et al, . (2021) Effect of Refractory Tantalum Metal Filling on the Microstructure and Thermoelectric Properties of Co4Sb12Skutterudites. ACS Omega, 6 (5). pp. 3900-3909. ISSN 24701343

Y

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2021) Inkjet printed CuIn(1-X)GaXSe2 thin film by controlled selenium distribution for improved power conversion efficiency in chalcopyrite solar cells. Applied Surface Science Advances, 6. pp. 1-7. ISSN 2666-5239