Items where Division is "Department of Material Science Engineering" and Year is 2015

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel. Isij International, 54 (12). pp. 2844-2853. ISSN 0915-1559

Anand, D and Khandelwal, Mudrika (2015) Novel conducting paper from bacterial cellulose and poly aniline. Project Report. Technical volume in 29th Engineering Congress, Hyderabad under the sub-theme “Manufacturing” Technical Session V, Hyderabad.

Anand, D and Khandelwal, Mudrika (2015) Route to conducting nanocomposites by simultaneous in situ polymerization of aniline and matrix assembly from bacterial cellulose nanowhiskers. Project Report. International Conference "Plast India-2015", Gandhinagar.

Anand, Divya and Khandelwal, Mudrika (2015) Conducting flexible paper based on Bacterial cellulose and Polyaniline composites. Masters thesis, Indian Institute of Technology Hyderabad.

Bruyer, E. and Sayede, A. and Ramadurai, Ranjit and et al, . (2015) Insight on the ferroelectric properties in a (BiFeO3)2(SrTiO3)4 superlattice from experiment and ab initio calculations. Applied Physics Letters, 107 (4). 042904. ISSN 0003-6951

Chadha, Kanwal and Bhattacharjee, Pinaki Prasad and Jahazi, M (2015) The Effect of Strain Reversal during High Pressure Torsion on the Microstructure Evolution and Texture of Aluminum Alloys. In: Characterization of Minerals, Metals, and Materials 2015. Springer, Cham, pp. 107-114.

Chen, L and Chen, J and Lebensohn, R A and Yi, Y Z and Heo, T W and Bhattacharjee, S and Chang, K and Mathaudhu, S and Liu, Z K and Chen, L Q (2015) An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Computer Methods in Applied Mechanics and Engineering, 285. pp. 829-848. ISSN 0045-7825

Eleti, Rajeshwar Reddy (2015) Hot deformation behavior of CrMnFeCoNi equiatomic FCC High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Equbal, A (2015) Synthesis and Sintering Kinetics of Mechanically Alloyed FeCrCoMnNi High Entropy Alloy Powders. Masters thesis, Indian Institute of Technology Hyderabad.

G D, Sathiaraj and Bhattacharjee, Pinaki Prasad (2015) Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 647. pp. 82-96. ISSN 0925-8388

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Effect of Prior Recovery Treatment on the Evolution of Cube Texture During Annealing of Severely Warm-Rolled Al-2.5 wt pctMg Alloy. Metallurgical and Materials Transactions A, 46 (11). pp. 4966-4977. ISSN 1073-5623

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during annealing of Al-2.5%Mg-0.2%Sc severely deformed by a combination of accumulative roll bonding (ARB) and conventional rolling. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Gatti, Jagg Rao (2015) Understanding and Control of Recrystallization Texture in Severely Deformed Al – 2.5wt.%Mg Alloys. PhD thesis, Indian Institute of Technology Hyderabad.

I, Srikanth and Kumar, Suresh and Singh, V and B, Rangababu and Ghosal, P and Ch, Subrahmanyam (2015) Effect of carbon nanofibre addition on the mechanical properties of different Vf carbon-epoxy composites. Bulletin of Materials Science, 38 (2). pp. 309-317. ISSN 0250-4707

J R, Gatti and Bhattacharjee, Pinaki Prasad (2015) Nucleation behavior and formation of recrystallization texture in pre-recovery treated heavily cold and warm-rolled Al–2.5 wt.%Mg alloy. Materials Characterization, 106. pp. 141-151. ISSN 1044-5803

Kanwal, C and Bhattacharjee, Pinaki Prasad and Mohammad, J (2015) Characterization of Minerals, Metals, and Materials. In: TMS Annual Meeting, January, 2015.

Karre, R and Niranjan, M K and Dey, Suhash Ranjan (2015) First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications. Materials Science and Engineering: C, 50. pp. 52-58. ISSN 0928-4931

Karre, Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan (2015) Development of β Ti-xNb alloys through firstprinciples DFT analysis and P/M route for orthopedic implants. Transactions of PMAI, 41 (2). pp. 51-54. ISSN 0377-9416

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2015) Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000°C with different strain rates. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Mandati, S (2015) Fabrication of CuInSe2 and Cu(In,Ga)Se2 Absorber Layers by Pulse- and Pulse-reverse Electrochemical Techniques for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Enhanced photoresponse of Cu(In,Ga)Se2 /CdS heterojunction fabricated using economical non-vacuum methods. Electronic Materials Letters, 11 (4). pp. 618-624. ISSN 2093-6788

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition. Journal of Power Sources, 273. pp. 149-157. ISSN 0378-7753

Maurya, A K (2015) Synthesis and Mechanical Studies of Mg-Hydroxyapatite Composite for Bio materials Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Palli, S and Hamann, S and Wambach, M and Ludwig, A and Dey, Suhash Ranjan (2015) Fabrication of a Ni-Cu Thin Film Material Library Using Pulsed Electrodeposition. Journal of The Electrochemical Society, 161 (10). D504-D509. ISSN 0013-4651

Rani, M Usha and Deshpande, Atul Suresh and Ramadurai, Ranjit (2015) Effect of Template and Processing Conditions on BiFeO3 Nanofoams Synthesized by Sol-gel Method. In: International Conference on Magnetic Materials and Applications ICMAGMA, December 2015, Chennai, India.

Reddy, N S and Panigrahi, Bharat Bhooshan and Ho, C M and Kim, J H and Lee, C S (2015) Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys. Computational Materials Science, 107. pp. 175-183. ISSN 0927-0256 (In Press)

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2015) Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy. Journal of Materials Science: Materials in Electronics, 50 (19). pp. 6444-6456. ISSN 0022-2461

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni–60 wt.%Co alloys. Journal of Alloys and Compounds, 637. pp. 267-276. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy. Materials Characterization, 109. pp. 189-197. ISSN 1044-5803

Sathiaraj, G D and Lee, C and Tsai, C W and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and crystallographic texture in severely cold rolled high entropy equiatomic CoCrFeMnNi alloy during annealing. IOP Conference Series: Materials Science and Engineering, 82. pp. 1-4. ISSN 1757-8981

Upadhyaya, M (2015) Fabrication of Epitaxial Thin Films by Pulsed Laser Deposition and Structural Studies of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3: a Lead Free Piezoelectric. Masters thesis, Indian Institute of Technology Hyderabad.

Yebaji, Sushil Gyanoba (2015) Micro structure-Texture Evolution Studies on IMI 834 Titanium Alloy during High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Zaid, M and Bhattacharjee, Pinaki Prasad (2015) Microtexture of constituent phases in a heavily warm- rolled and annealed duplex stainless steel. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.