Items where Division is "Department of Material Science Engineering" and Year is 2013

B

Bhattacharjee, P P and Joshi, M and Chaudhary, V P and Gatti, J R and Zaid, M (2013) Texture evolution during cross rolling and annealing of high-purity nickel. Metallurgical and Materials Transactions A, 44 (6). pp. 2707-2716. ISSN 1073-5623

Bhattacharjee, P P and Takatsuji, Y and Miyajima, Y and Terada, D and Tsuji, N (2013) Recrystallization Texture of Heavily Cold Rolled Polycrystalline Nickel Sheets With and Without Strong Starting Cube Texture. In: 5th International Conference on Recrystallization and Grain Growth, ReX and GG 2013, 5-10, May 2013, Sydney, NSW; Australia.

Bhattacharjee, Pinaki Prasad and Joshi, M and Chaudhary, V P and Zaid, M (2013) The Effect of Starting Grain Size on the Evolution of Microstructure and Texture in Nickel during Processing by Cross-Rolling. Materials Characterization, 76. pp. 21-27. ISSN 1044-5803

C

C, Elango (2013) Effect of Stacking Fault Energy on Microstructure and Texture Evolution in Ni-Co Alloys during Severe Plastic Deformation by High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Cao, Y and Bhattacharya, Saswata and Shen, J and Randall, C A and Chen, L Q (2013) Role of polaron hopping in leakage current behavior of a SrTiO3 single crystal. Journal of Applied Physics, 114 (22). pp. 1-7. ISSN 0021-8979

Chadha, Kanwal (2013) The Effect of Strain Reversal during High Pressure Torsion on the Evolution of Microstructure, Texture and Hardness Properties of Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

D

Dey, S R and Hollang, L and Beausir, B and Hieckmann, E (2013) Formation of micro shear bands during cyclic deformation of sub-microcrystalline nickel. Scripta Materialia, 68 (8). pp. 631-634. ISSN 1359-6462

Dey, Suhash Ranjan and Hollang, L and Beausir, B and Hieckmann, E and Skrotzki, W (2013) Reprint of: Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials, 67. pp. 53-58. ISSN 0167-6636

Dey, Suhash Ranjan and Hollang, L and Beausir, B and et al, . (2013) Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials.

G

Ghodke, S C (2013) Fabrication and Studies of Organic-Inorganic Hybrid Composites For Piezoelectric Based Vibration Sensors. Masters thesis, Indian Institute of Technology Hyderabad.

I

I, Srikanth and N, Padmavathi and Kumar, Suresh and Ghosal, P and Kumar, Anil and Ch, Subrahmanyam (2013) Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites. Composites Science and Technology, 80. pp. 1-7. ISSN 0266-3538

M

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Improved Photoelectrochemical Performance Of Cu(In,Ga)Se2 Thin Films Prepared By Pulsed Electrodeposition. Journal of Renewable and Sustainable Energy, 5. 031602. ISSN 1941-7012

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Pulsed electrodeposition of Cuinse2 thin films with morphology for solar cell applications. Journal of The Electrochemical Society, 160 (4). D173-D177. ISSN 0013-4651

Mandati, S and Sarada, B V and Dey, Suhash Ranjan and et al, . (2013) Pulse Electrodeposition and Characterization of CIGS thin-films for Solar Cells Applications. In: Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry , ELAC-2013, January, 2013, Hyderabad, India.

Manivannan, R and Anil, Kumar and Ch, Subrahmanyam (2013) Aqueous Gelcasting of Fused Silica Using Colloidal Silica Binder. Journal of the American Ceramic Society, 96 (8). pp. 2432-2436. ISSN 0002-7820

Myana, S K (2013) Electrical Transport Properties of Amorphous Ge15Te85 Thin Films Using Scanning Probe Microscopy for Phase Change Memory Applications. Masters thesis, Indian Institute of Technology Hyderabad.

R

Rajamallu, Karre and Niranjan, Manish K and Dey, Suhash Ranjan (2013) Concept of designing novel beta-titanium alloys using first-principles calculations. In: International Conference on Advances in Chemical Engineering ACE2013, January 2013, Roorkee, India.

Reddy, N S and Panigrahi, Bharat Bhooshan and Krishnaiah, J (2013) Modeling mechanical properties of low carbon hot rolled steels. In: 7th International Conference on Bio-Inspired Computing: Theories and Applications, BIC-TA 2012, 14-16, December 2012, Gwalior, Madhya Pradesh; India.

S

Sajan, Sajin G and Meshram, Manish and Dey, Suhash Ranjan and et al, . (2013) Friction Stir Welding of Aluminum 6082 with Mild Steel and its Joint Analyses. In: 2nd Annual International Conference on Materials Processing and Characterization, 2013, Hyderabad, India.

Sharma, B (2013) Annealing Effects on Accumulative Roll Bonded Aluminium Laminates of Different Purities. Masters thesis, Indian Institute of Technology Hyderabad.

Srinivas, P. and Dey, Suhash Ranjan (2013) Combinatorial pulsed electrodeposition of binary Ni-Cu alloys. In: Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry , ELAC-2013, 2013, Hyderabad, India.

Srinivas, P. and Hamann, Sven and Dey, Suhash Ranjan (2013) Development of Ni–Cu Materials Library by Using Combinatorial Pulsed Electrodeposition. Transactions of the Indian Institute of Metals, 66 (4). pp. 429-432. ISSN 0972-2815

Srinivasa Reddy, P and Hamann, S and Wambach, M and Kieschnick, M and Ludwig, A and Dey, S R (2013) Development of Ni-Cu materials library by using combinatorial pulsed electrodeposition. Transactions of the Indian Institute of Metals, 66 (4). pp. 429-432. ISSN 0972-2815

V

Vasudevan, R and Karthik, T and Ganesan, S and Jayavel, R (2013) Effect of microwave sintering on the structural and densification behavior of sol-gel derived zirconia toughened alumina (ZTA) nanocomposites. Ceramics International, 39 (3). pp. 3195-3204. ISSN 0272-8842