Items where Division is "Department of Biomedical Engineering" and Year is 2018

A

Ali, M A and John, Renu and Agrawal, V V and et al, . (2018) A Study on Heterogeneous Electron Charge-Transfer Processes at Redox-Active Chitosan Modified Carbon Nanotubes Film-Coated Electrodes Using AC Impedance technique. Experimental Fluid Mechanics.

Almelkar, Shahdab I and Bethapudi, Sundeep and Rath, Subha Narayan (2018) Development of an experimental model of a decellularized kidney scaffold by perfusion mode and analyzing the three-dimensional extracellular matrix architecture by edge detection method. Indian Journal of Nephrology, 28 (5). pp. 339-344. ISSN 0971-4065

Ambekar, Yogeshwari Sanjay and John, Renu (2018) ALGORITHMS FOR OPTICAL COHERENCE TOMOGRAPHY AND ITS CLINICAL APPLICATIONS. Masters thesis, Indian Institute of Technology Hyderabad.

B

Becker, Holger and Gray, Bonnie L and Unni, H N and Thomas, Toni (2018) LED based opto-wetting platforms for micromixing. In: BioMEMS, and Medical Microsystems.

C

Chameettachal, Shibu and Pati, Falguni (2018) 12-Polymeric gels for tissue engineering applications. Polymeric Gels. pp. 305-330.

TEMP/E-1/10328/2018-CHE (2018) Decellularized Corneal Matrix Basedhydrogel, Bioink Formulation and Methods Thereof. ..

Chameettachal, Shibu and Pati, Falguni (2018) Inkjet-based 3D bioprinting. In: 3D Bioprinting in Regenerative Engineering Principles and Applications. CRC Press. ISBN 9781315280493

Chauhan, Deepak S and Bukhari, Amirali B and Ravichandran, Gayathri and Gupta, Ramkrishn and George, Liya and Poojari, Radhika and Ingle, Aravind and Rengan, Aravind Kumar and Shanavas, Asifkhan and Srivastava, Rohit and De, Abhijit (2018) Enhanced EPR directed and Imaging guided Photothermal Therapy using Vitamin E Modified Toco-Photoxil. Scientific Reports, 8 (1). pp. 1-15. ISSN 2045-2322

D

D E, Sindhuja and Bethapudi, Sundeep and Almelkar, Shahdab I and Rath, Subha Narayan (2018) Regional Differentiation of Adipose-Derived Stem Cells Proves the Role of Constant Electric Potential in Enhancing Bone Healing. Journal of Medical and Biological Engineering, 38 (5). pp. 804-815. ISSN 1609-0985

D E, Sindhuja and Rath, Subha Narayan (2018) Co-cultured Mesenchymal Stem Cell Differentiation on 3D Printed Scaffolds for Bone Tissue Engineering. PhD thesis, Indian institute of technology Hyderabad.

G

George, A and Raghavendra, N K (2018) Mutational Analysis and Evaluation of Inhibitors of HIV-1 Integrase – Human LEDGF/p75 Interaction. PhD thesis, Indian Institute of Technology, Hyderabad.

K

Kandasamy, Ganeshlenin and Khan, Shaheen and Giri, Jyotsnendu and Bose, Suryasarathi and Veerapu, Naga Suresh and Maity, Dipak (2018) One-pot synthesis of hydrophilic flower-shaped iron oxide nanoclusters (IONCs) based ferrofluids for magnetic fluid hyperthermia applications. Journal of Molecular Liquids. ISSN 0167-7322 (In Press)

Kshirasagar, Saniya Sanjay and Unni, H N (2018) Digital Microfluidic (DMF) devices based on electrowetting on dielectric (EWOD) for biological applications. Masters thesis, Indian Institute of Technology, Hyderabad.

M

Munagapati, H and Yadav, R and Tiwari, V M (2018) Identifying Water Storage Variation in Krishna Basin, India from in situ and Satellite based Hydrological Data. Journal of the Geological Society of India, 92 (5). pp. 607-615. ISSN 0016-7622

N

Nigam, Richa and Babu, Kaki Raveendra and Ghosh, Topi and Kumari, Bhavini and Akula, Deepa and Rath, Subha Narayan and Das, Prolay and Roy, Anindya and Khan, Faiz Ahmed (2018) Indenone derivatives as inhibitor of human DNA dealkylation repair enzyme AlkBH3. Bioorganic & Medicinal Chemistry. ISSN 0968-0896 (In Press)

P

Pareddy, Pratyusha and John, Renu (2018) IIT-Hyderabad entrepreneur bags TiE-BIRAC award. Telangana Today, Hyderabad.

Poola, Praveen Kumar and Jayaraman, Varshini and John, Renu (2018) Quantitative label-free technique for morphological evaluation of human sperm—a promising tool in semen evaluation. OSA Continuum, 1 (4). p. 1215. ISSN 2578-7519

201841013261 (2018) Apparatus and Methods for Label-Free Morphological Evaluation of Human Sperm. ..

Poola, Praveen Kumar and John, Renu (2018) Low Coherence Quantitative Phase Microscopy and Its Clinical Applications. PhD thesis, Indian institute of technology Hyderabad.

Popescu, Gabriel and Georges, Marc P and John, Renu (2018) Quantitative phase imaging of low-cost digital in-line holography in comparison with off-axis digital holographic microscopy. In: Proceedings of SPIE 10677, Unconventional Optical Imaging, 106773C, 22-26 April 2018, Strasbourg, France.

R

R Yerrapragada, Manjoosha and Unni, H N (2018) Paper-based microfluidic device for diagnosis of osteoporosis markers. Bioanalysis, 10 (20). pp. 1639-1649. ISSN 1757-6180

201842000689 (2018) Neuromechanical Simulator System. ..

Ram, G Hanu Phani and Bansode, Vaibhav and John, Renu (2018) Lensless holographic microscope of biological samples. In: Computational Optical Sensing and Imaging, 25–28 June 2018, Florida, United States.

Rath, Subha Narayan (2018) A peek at the nano-level to biomimic bones. Research Matters.

S

Sethi, Soumya and Pati, Falguni (2018) Development of an in vitro 3D Printed Liver Sinusoid Model. Masters thesis, Indian Institute of Technology Hyderabad.

Shukla, Amit Kumar and Rath, Subha Narayan (2018) 3D Bio-printing of Patient Specific Blood Vessels and Perfusion based Bioreactor to Investigate Endothelial Cell Survival. Masters thesis, Indian Institute of Technology Hyderabad.

Singh, Ruby and Ahmed, Farhan and Polley, Poulomi and Giri, Jyotsnendu (2018) Fabrication and characterization of core-shell nanofibers using a next-generation airbrush for biomedical applications. ACS Applied Materials & Interfaces. ISSN 1944-8244

Sirisha, Sripada and Raghavan, Mohan (2018) Computational model of Upper Limb motor circuits using NEUROiD. Masters thesis, Indian Institute of Technology Hyderabad.

Soni, Raghav and Rath, Subha Narayan (2018) Patient-specific Bone Defect Reconstruction using Bioactive Filament through 3D Printing. Masters thesis, Indian Institute of Technology Hyderabad.

Soni, Raghav and Roopavath, Uday Kiran and Mahanta, Urbashi and Deshpande, A S and Rath, Subha Narayan (2018) Sodium alginate/gelatin with silica nanoparticles a novel hydrogel for 3D printing. AIP Conference Proceedings, 1964. ISSN 0094-243X

Surendran, Deepak and Raghavan, Mohan (2018) SENSORY AUTONOMOUS COUPLING. Masters thesis, Indian Institute of Technology Hyderabad.

T

Thomas, Tony and Unni, H N (2018) LED based Optowetting Platforms for Micromixing. In: Biomedical microelectromechanical systems and Medical Microsystems, 19 February 2018, California, United States.

Tomar, Kripi (2018) Development of Met-In -Prot server : Analysis and prediction of the metal binding pockets in Apoproteins & Exploring the influence of non-Watson and Crick base pairs on DNA Conformation via Molecular Dynamics techniques and Circular dichroism spectroscopy. Masters thesis, Indian Institute of Technology Hyderabad.

Y

Yeleswarapu, Sriya and Pati, Falguni (2018) Development of Invitro 3D Bronchi Model Using Novel Decellularized Smooth Muscle Matrix. Masters thesis, Indian Institute of Technology Hyderabad.