One-step synthesis of carbon-doped PPy nanoparticles interspersed in 3D porous melamine foam as a high-performance piezoresistive pressure, strain, and breath sensor

Veeralingam, Sushmitha and Praveen, Shanigaram and Badhulika, Sushmee and et al, . (2022) One-step synthesis of carbon-doped PPy nanoparticles interspersed in 3D porous melamine foam as a high-performance piezoresistive pressure, strain, and breath sensor. Materials Chemistry Frontiers, 6 (5). pp. 570-579. ISSN 2052-1537

Text
Materials_Chemistry_Frontiers.pdf - Published Version
Restricted to Registered users only
Download (5MB) | Request a copy

Abstract

Flexible and compressible sensors have been widely used for various wearable applications; however, the devices are typically planar, expensive and with limited compressibility. In this work, carbon-doped polypyrrole nanoparticles interfaced in a 3D-macroporous melamine foam (C-PPy@MF) composite are used as a low-cost multifunctional sensor for breath monitoring, pressure-, and strain-sensing applications. The C-PPy nanostructures were grown on MF using an ultrasonic irradiation technique to achieve a firm loading of C-PPy on the MF surface and interface. Detailed morphological characterization studies reveal the discrete distribution of C-PPy nanoparticles in the MF matrix. Structural analysis revealed a broad amorphous phase corresponding to the carbon polymer chains. The fabricated C-PPy@MF-based breath sensor displayed a fast response time of 0.9 s and a recovery time of 1.3 s upon continuous exhalation and inhalation cycles. In addition, the breath sensor was used for the monitoring of human breath per minute (bpm) and dehydration of the lungs. The superior response of the breath sensor can be attributed to the surface engineering of MF with the C-PPy nanostructures, which enables an excellent surface reactivity due to their large relative surface area. The C-PPy@MF-based piezoresistive pressure sensor exhibits a sensitivity of 2 kPa-1 in the pressure range of 1-90 kPa and a rapid response time of 160 ms. A 3 × 3 pressure sensor array was developed for precise spatial mapping to demonstrate the practicability of the pressure sensor. The fabricated C-PPy@MF-based strain sensor recorded a maximum gauge factor (GF) of 23.47 and can withstand a maximum strain of 80%, which is higher than most of the previously reported similar yet sophisticated devices. In addition, a constant response was obtained for 1000 bending cycles, demonstrating the excellent mechanical stability of the fabricated C-PPy@MF device. The fabricated C-PPy@MF-based flexible breath, pressure, and strain sensor has potential applications in electronic skin and wearable human motion sensor applications. This journal is © the Partner Organisations.

[error in script]

IITH Creators:

IITH Creators	ORCiD
Badhulika, Sushmee	https://orcid.org/0000-0003-3237-3031

Item Type:

Article

Additional Information:

SB acknowledges financial assistance from Defence Research Development Organization (DRDO) funding DYSL-AST/CARS/ CONTRACT/20-21/02. SV acknowledges the SEM characterization facility funded by DST-FIST project no. DST-FIST (SR/FST/ETI-421/2016).

Uncontrolled Keywords:

Breath sensors; Low-costs; Macroporous; Melamine foams; Multifunctional sensors; One step synthesis; Performance; Piezoresistive pressure sensors; Strain sensors; Wearable applications

Subjects:

Electrical Engineering

Divisions:

Department of Electrical Engineering

Depositing User:

. LibTrainee 2021

Date Deposited:

22 Jul 2022 06:29

Last Modified:

22 Jul 2022 06:29

URI:

http://raiithold.iith.ac.in/id/eprint/9568