A True 1V 1µW Biomedical Front End with Reconﬁgurable ADC for Self powered Smarter IoT Healthcare Systems

Patra, P and Yadav, K and Naik, J and Dutta, Asudeb (2015) A True 1V 1µW Biomedical Front End with Reconﬁgurable ADC for Self powered Smarter IoT Healthcare Systems. In: 2015 IEEE Region 10 Conference, 1-4 Nov,2015, Macao.

Preview

Text
2284.pdf - Published Version
Download (1MB) | Preview

Abstract

This work proposes an ultralow power highly linear analog front-end (AFE) with an input dynamic range from 200μVpp to 20mVpp. The system consists of a signal conditioning instrumentation amplifier (IA), two programmable gain amplifiers (PGA), a mixed signal automatic gain control (AGC), two sample and hold (S/H), a 10 bit successive approximation register (SAR) analog to digital converter (ADC), and a ΣΔ modulator with 10 bit effective number of bits (ENOB). A highly linear capacitively-coupled IA is achieved by increasing its feedback factor. Moreover, a transconductance (gm) cancellation technique is proposed for achieving a high common mode rejection ratio (CMRR). The conditioned signal is digitized using a SAR ADC for an input range of 200μVpp to 2mVpp, and, an opamp-shared ΣΔ ADC for an input range of 2mVpp to 20mVpp. The selection between the two ADCs is done by the AGC. The full system is designed using 1V supply in UMC 0.18μm CMOS technology. The AFE (IA and the two PGAs) achieves an overall linearity of more than 12 bits, for an input range of 200μVpp to 20mVpp while consuming 300nW with a bandwidth of 0.05 - 250Hz. The power consumption of the SAR ADC is 40nW while operating at a sampling frequency of 1KHz. The ΣΔ ADC consumes 300nW at a sampling frequency of 32KHz with an OSR of 32. The proposed system is intended to be powered by an energy scavenging circuit without compromising its own performance. The system was successfully tested for an ECG signal obtained from PTB database.

[error in script]

IITH Creators: