Influence of material anisotropy on void coalescence by necking for face-centered cubic single crystals

Chinthapenta, Viswanath (2023) Influence of material anisotropy on void coalescence by necking for face-centered cubic single crystals. Materials Today Communications, 35. p. 106010. ISSN 2352-4928

Text
1-s2.0-S2352492823007018-main.pdf - Published Version
Download (5MB)

Abstract

This paper presents the coalescence of microvoids embedded in an anisotropic copper single crystal using a micromechanics approach. Crystal plasticity framework was used to account for the anisotropy arising from the orientation and slip. A full 3D representative volume element (RVE) with void was considered to circumvent spurious loading. The constant load path parameters were enforced on the RVE using multi-point constraints. Various loading conditions that lead to necking were studied. The key finding from the present study is the interplay of the load path parameters (triaxiality and Lode parameter), material anisotropy, and initial void volume fraction on the void coalescence. It is noticed that at high triaxiality, the ductile failure mechanism is dominated by the necking mechanism, and at medium to low triaxiality, the ductile failure mode is a combination of shearing and necking mechanisms. It was observed that non-homogenous crystallographic slip manifests the material anisotropic effects in void cell RVE across various crystallographic orientations. The crystal orientation [110] exhibited higher shearing than the orientation [100] and [111]. Further, material anisotropy significantly affected void morphology but not the void coalescence strains at high triaxial values.

[error in script]

IITH Creators:

IITH Creators	ORCiD
Chinthapenta, Viswanath	http://www.orcid.org/0000-0001-9038-6274

Item Type:

Article

Uncontrolled Keywords:

Ductile fracture; Load path parameters; Material anisotropy; Multi-point constraints; Void coalescence; Crystal orientation; Ductile failures; Face-centered-cubic single crystals; Load path parameter; Load paths; Material anisotropy; Micro voids; Multi point constraints; Representative volume elements; Triaxiality; Void coalescence; Anisotropy; Coalescence; Ductile fracture; Shearing; Single crystals; Void fraction

Subjects:

Physics > Mechanical and aerospace

Divisions:

Department of Mechanical & Aerospace Engineering

Depositing User:

Mr Nigam Prasad Bisoyi

Date Deposited:

27 Nov 2023 08:53

Last Modified:

27 Nov 2023 08:53

URI:

http://raiithold.iith.ac.in/id/eprint/11763